arXiv subjects

Neil Phillips

Publications and source records attributed to Neil Phillips.

At least 19 recordsLinked to original sources

arXiv2023

Propagation of electrical signals by fungi

Living fungal mycelium networks are proven to have properties of memristors, capacitors and various sensors. To further progress our designs in fungal electronics we need to evaluate how electrical signals can be propagated through mycelium networks. We investigate the ability of mycelium-bound composites to convey electrical signals, thereby enabling the transmission of frequency-modulated information through mycelium networks. Mycelia were found to reliably transfer signals with a recoverable frequency comparable to the input, in the \SIrange{100}{10000} {\hertz} frequency range. Mycelial adaptive responses, such as tissue repair, may result in fragile connections, however. While the mean amplitude of output signals was not reproducible among replicate experiments exposed to the same input frequency, the variance across groups was highly consistent. Our work is supported by NARX modelling through which an approximate transfer function was derived. These findings advance the state of the art of using mycelium-bound composites in analogue electronics and unconventional computing.

cs.ET↗

arXiv2023

Transfer Functions of Proteinoid Microspheres

Proteinoids, or thermal proteins, are inorganic entities formed by heating amino acids to their melting point and commencing polymerisation to form polymeric chains. Typically, their diameters range from 10 to 100 micron. Some amino acids incorporated into proteinoid chains are more hydrophobic than others, leading proteinoids to cluster together when they are present in aqueous solutions at specific concentrations, allowing them to grow into microspheres. The peculiar structure of proteinoids composed of linked amino acids endows them with unique properties, including action-potential like spiking of electrical potential. These unique properties make ensembles of proteinoid microspheres a promising substrate for designing future artificial brains and unconventional computing devices. To evaluate a potential of proteinoid microspheres for unconventional electronic devices we measure and analyse the data-transfer capacities of proteinoid microspheres. In experimental laboratory conditions we demonstrate that the transfer function of proteinoids microspheres is a nontrivial phenomenon, which might be due to the wide range of proteinoid shapes, sizes, and structures.

cs.ET↗

arXiv2023

Kombucha electronics

A kombucha is a tea and sugar fermented by over sixty kinds of yeasts and bacteria. This symbiotic community produces kombucha mats, which are cellulose-based hydrogels. The kombucha mats can be used as an alternative to animal leather in industry and fashion once they have been dried and cured. Prior to this study, we demonstrated that living kombucha mats display dynamic electrical activity and distinct stimulating responses. For use in organic textiles, cured mats of kombucha are inert. To make kombucha wearables functional, it is necessary to incorporate electrical circuits. We demonstrate that creating electrical conductors on kombucha mats is possible. After repeated bending and stretching, the circuits maintain their functionality. In addition, the abilities and electronic properties of the proposed kombucha, such as being lighter, less expensive, and more flexible than conventional electronic systems, pave the way for their use in a diverse range of applications.

cs.ET↗

arXiv2022

Reactive fungal insoles

Mycelium bound composites are promising materials for a diverse range of applications including wearables and building elements. Their functionality surpasses some of the capabilities of traditionally passive materials, such as synthetic fibres, reconstituted cellulose fibres and natural fibres. Thereby, creating novel propositions including augmented functionality (sensory) and aesthetic (personal fashion). Biomaterials can offer multiple modal sensing capability such as mechanical loading (compressive and tensile) and moisture content. To assess the sensing potential of fungal insoles we undertook laboratory experiments on electrical response of bespoke insoles made from capillary matting colonised with oyster fungi Pleurotus ostreatus to compressive stress which mimics human loading when standing and walking. We have shown changes in electrical activity with compressive loading. The results advance the development of intelligent sensing insoles which are a building block towards more generic reactive fungal wearables. Using FitzhHugh-Nagumo model we numerically illustrated how excitation wave-fronts behave in a mycelium network colonising an insole and shown that it may be possible to discern pressure points from the mycelium electrical activity.

cs.ET↗

arXiv2021

Fungal electronics

Fungal electronics is a family of living electronic devices made of mycelium bound composites or pure mycelium. Fungal electronic devices are capable of changing their impedance and generating spikes of electrical potential in response to external control parameters. Fungal electronics can be embedded into fungal materials and wearables or used as stand alone sensing and computing devices.

cs.ET↗

arXiv2021

A Report to ESO Council on the Impact of Satellite Constellations

Up to 100,000 satellites could be launched into Low Earth Orbit (LEO) in the coming decade. Assuming the two most advanced companies' plans are realised, close to 80,000 satellites will be present at a variety of altitudes between 328 - 1,325 km. At Paranal, more than 5,000 satellites will be over the horizon at any given time. Of these, depending on the hour of night and season, a few hundred to several thousand will be illuminated by the sun and potentially detectable. Satellites show a very strong concentration towards the local horizon, with over 50% of the satellites below 20 degrees elevation. This report informs ESO's Council of the impacts on ESO facilities, mitigation measures that ESO could adopt in the future, and the various community efforts in which ESO is involved.

astro-ph.IM↗

arXiv2019

Neuromorphic Liquid Marbles With Aqueous Carbon Nanotube Cores

Neuromorphic computing devices attempt to emulate features of biological nervous systems through mimicking the properties of synapses, towards implementing the emergent properties of their counterparts, such as learning. Inspired by recent advances in the utilisation of liquid marbles (microlitre quantities of fluid coated in hydrophobic powder) for the creation of unconventional computing devices, we describe the development of liquid marbles with neuromorphic properties through the use of copper coatings and 1.0 mg/ml carbon nanotube-containing fluid cores. Experimentation was performed through sandwiching the marbles between two cup-style electrodes and stimulating them with repeated DC pulses at 3.0 V. Our results demonstrate that `entrainment' of a carbon nanotube filled-copper liquid marble via periodic pulses can cause their electrical resistance to rapidly switch between high to low resistance profiles, upon inverting the polarity of stimulation: the reduction in resistance between high and low profiles was approximately 88\% after two rounds of entrainment. This effect was found to be reversible through reversion to the original stimulus polarity and was strengthened by repeated experimentation, as evidenced by a mean reduction in time to switching onset of 43\%. These effects were not replicated in nanotube solutions not bound inside liquid marbles. Our electrical characterisation also reveals that nanotube-filled liquid marbles exhibit pinched loop hysteresis IV profiles consistent with the description of memristors. We conclude by discussing the applications of this technology to the development of unconventional computing devices and the study of emergent characteristics in biological neural tissue.

cs.ET↗

arXiv2019

Wide Bandwidth Considerations for ALMA Band 2

One of the main considerations in the ALMA Development Roadmap for the future of operations beyond 2030 is to at least double its on-sky instantaneous bandwidth capabilities. Thanks to the technological innovations of the past two decades, we can now produce wider bandwidth receivers than were foreseen at the time of the original ALMA specifications. In several cases, the band edges set by technology at that time are also no longer relevant. In this memo, we look into the scientific advantages of beginning with Band 2 when implementing such wideband technologies. The Band 2 receiver system will be the last of the original ALMA bands, completing ALMA's coverage of the atmospheric windows from 35-950 GHz, and is not yet covered by any other ALMA receiver. New receiver designs covering and significantly extending the original ALMA Band 2 frequency range (67-90 GHz) can now implement these technologies. We explore the scientific and operational advantages of a receiver covering the full 67-116 GHz atmospheric window. In addition to technological goals, the ALMA Development Roadmap provides 3 new key science drivers for ALMA, to probe: 1) the Origins of Galaxies, 2) the Origins of Chemical Complexity, and 3) the Origins of Planets. In this memo, we describe how the wide RF Band 2 system can help achieve these goals, enabling several high-profile science programmes to be executed uniquely or more effectively than with separate systems, requiring an overall much lower array time and achieving more consistent calibration accuracy: contiguous broad-band spectral surveys, measurements of deuterated line ratios, and more generally fractionation studies, improved continuum measurements (also necessary for reliable line flux measurements), simultaneous broad-band observations of transient phenomena, and improved bandwidth for 3 mm very long baseline interferometry (VLBI).

astro-ph.IM↗

arXiv2019

Calibration of ALMA as a phased array: ALMA observations during the 2017 VLBI campaign

We present a detailed description of the special procedures for calibration and quality assurance of Atacama Large Millimeter/submillimeter Array (ALMA) observations in Very Long Baseline Interferometry (VLBI) mode. These procedures are required to turn the phased ALMA array into a fully calibrated VLBI station. As an illustration of these methodologies, we present full-polarization observations carried out with ALMA as a phased array at 3mm (Band 3) and 1.3mm (Band 6) as part of Cycle-4. These are the first VLBI science observations conducted with ALMA and were obtained during a 2017 VLBI campaign in concert with other telescopes worldwide as part of the Global mm-VLBI Array (GMVA, April 1-3) and the Event Horizon Telescope (EHT, April 5-11) in ALMA Bands 3 and 6, respectively.

astro-ph.IM↗

arXiv2019

Thermal switch of oscillation frequency in Belousov-Zhabotinsky liquid marbles

External control of oscillation dynamics in the Belousov-Zhabotinsky reaction is important for many applications including encoding computing schemes. When considering the BZ reaction there are limited studies dealing with thermal cycling, particularly cooling, for external control. Recently, liquid marbles (LMs) have been demonstrated as a means of confining the Belousov-Zhabotinsky reaction in a system containing a solid-liquid interface. BZ LMs were prepared by rolling 50 {\mu}l droplets in polyethylene (PE) powder. Oscillations of electrical potential differences within the marble were recorded by inserting a pair of electrodes through the LM powder coating into the BZ solution core. Electrical potential differences of up to 100mV were observed with an average period of oscillation ca. 44 s. BZ LMs were subsequently frozen to -1oC to observe changes in the frequency of electrical potential oscillations. The frequency of oscillations reduced upon freezing to 11mHz cf. 23mHz at ambient temperature. The oscillation frequency of the frozen BZ LM returned to 23mHz upon warming to ambient temperature. Several cycles of frequency fluctuations were able to be achieved.

cs.ET↗

arXiv2018

Towards Experimental P-systems using multivesicular liposomes

P-systems are abstract computational models inspired by the phospholipid bilayer membranes generated by biological cells. Illustrated here is a mechanism by which recursive liposome structures (multivesicular liposomes) may be experimentally produced through electroformation of dipalmitoylphosphatidylcholine (DOPC) films for use in `real' P-systems. We first present the electroformation protocol and microscopic characterisation of incident liposomes towards estimating the size of computing elements, level of internal compartment recursion, fault tolerance and stability. Following, we demonstrate multiple routes towards embedding symbols, namely modification of swelling solutions, passive diffusion and microinjection. Finally, we discuss how computing devices based on P-systems can be produced and their current limitations.

cs.ET↗

arXiv2018

Towards the Design of Aerostat Wind Turbine Arrays through AI

A new form of aerostat wind generation system which contains an array of interacting turbines is proposed. The design of the balloon turbine components is undertaken through the combination of artificial intelligence and rapid prototyping techniques such that the need for highly accurate models/simulations of the lift and wake dynamics is removed/reduced. Initial small-scale wind tunnel testing to determine design and algorithmic fundamentals will be presented.

cs.NE↗

arXiv2018

Belousov-Zhabotinsky reaction in liquid marbles

This paper reports on a new method of encapsulating BZ solution droplets in a powder coating of either polyethylene (PE) or polytetrafluoroethylene (PTFE), to produce BZ liquid marbles (LMs). The BZ LMs have solid--liquid interfaces in contrast to the previously reported BZ encapsulation systems used to study pattern formations and wave transfers, such as BZ emulsions and BZ vesicles. All these systems are important to study as they can be seen as analogues for information transfer in excitable systems in nature. Due to the powder coating of the LMs, LMs do not wet the underlying substrate, making the LMs mobile, enabling them to be easily arranged in arrays. The preparation of complex LMs, containing an acidic oscillating solution, proves the resilience of LMs and their application in transporting a wide range of chemical cargoes and in playing a mediating role in chemical reactions. PTFE-coated LMs were harder to prepare and not as robust as PE-coated LMs, therefore oscillation studies of BZ LMs positioned in arrays only focused on PE-coated LMs. Sporadic transfer of excitation waves was observed between LMs placed in close proximity to each other in ordered and disordered arrays, suggesting the transfer of liquid species possibly arises from contact between imperfectly coated areas at the LM--LM interface or capillary action, where solution is actively transported to the marble surface through the coating. Propagation pathways of the excitation waves in both the disordered and ordered arrays of BZ LMs are reported. These results lay the foundations for future studies on information transmission and processing arrays of BZ LMs, in addition to observing BZ wave propagation in a LM and the effect of other physical stimuli such as heat, light and chemical environments on the dynamics of excitation in arrays of BZ Lms.

cs.ET↗

arXiv2018

Excitable London: Street map analysis with Oregonator model

We explore geometry of London's streets using computational mode of an excitable chemical system, Belousov-Zhabotinsky (BZ) medium. We virtually fill in the streets with a BZ medium and study propagation of excitation waves for a range of excitability parameters, gradual transition from excitable to sub-excitable to non-excitable. We demonstrate a pruning strategy adopted by the medium with decreasing excitability when wider and ballistically appropriate streets are selected. We explain mechanics of streets selection and pruning. The results of the paper will be used in future studies of studying dynamics of cities with living excitable substrates.

cs.ET↗

arXiv2018

Modelling Microbial Fuel Cells using lattice Boltzmann methods

An accurate modelling of bio-electrochemical processes that govern Microbial Fuel Cells (MFCs) and mapping their behaviour according to several parameters will enhance the development of MFC technology and enable their successful implementation in well defined applications. The geometry of the electrodes is among key parameters determining efficiency of MFCs due to the formation of a biofilm of anodophilic bacteria on the anode electrode, which is a decisive factor for the functionality of the device. We simulate the bio-electrochemical processes in an MFC while taking into account the geometry of the electrodes. Namely, lattice Boltzmann methods are used to simulate the fluid dynamics and the advection-diffusion phenomena in the anode compartment. The model is verified on voltage and current outputs of a single MFC derived from laboratory experiments under continuous flow.

cs.CE↗

arXiv2017

Liquid Marble Interaction Gate for Collision-Based Computing

Liquid marbles are microlitre droplets of liquid, encapsulated by self-organised hydrophobic particles at the liquid/air interface. They offer an efficient approach for manipulating liquid droplets and compartmentalising reactions in droplets. Digital fluidic devices employing liquid marbles might benefit from having embedded computing circuits without electronics and moving mechanical parts (apart from the marbles). We present an experimental implementation of a collision gate with liquid marbles. Mechanics of the gate follows principles of Margolus' soft-sphere collision gate. Boolean values of the inputs are given by the absence (FALSE) or presence (TRUE) of a liquid marble. There are three outputs: two outputs are trajectories of undisturbed marbles (they only report TRUE when just one marble is present at one of the inputs), one output is represented by trajectories of colliding marbles (when two marbles collide they lose their horizontal momentum and fall), this output reports TRUE only when two marbles are present at inputs. Thus the gate implements AND and AND-NOT logical functions. We speculate that by merging trajectories representing AND-NOT output into a single channel one can produce a one-bit half-adder. Potential design of a one-bit full-adder is discussed, and the synthesis of both a pure nickel metal and hybrid nickel/polymer liquid marble is reported.

cs.ET↗

arXiv2017

SONS: The JCMT legacy survey of debris discs in the submillimetre

Debris discs are evidence of the ongoing destructive collisions between planetesimals, and their presence around stars also suggests that planets exist in these systems. In this paper, we present submillimetre images of the thermal emission from debris discs that formed the SCUBA-2 Observations of Nearby Stars (SONS) survey, one of seven legacy surveys undertaken on the James Clerk Maxwell telescope between 2012 and 2015. The overall results of the survey are presented in the form of 850 microns (and 450 microns, where possible) images and fluxes for the observed fields. Excess thermal emission, over that expected from the stellar photosphere, is detected around 49 stars out of the 100 observed fields. The discs are characterised in terms of their flux density, size (radial distribution of the dust) and derived dust properties from their spectral energy distributions. The results show discs over a range of sizes, typically 1-10 times the diameter of the Edgeworth-Kuiper Belt in our Solar System. The mass of a disc, for particles up to a few millimetres in size, is uniquely obtainable with submillimetre observations and this quantity is presented as a function of the host stars' age, showing a tentative decline in mass with age. Having doubled the number of imaged discs at submillimetre wavelengths from ground-based, single dish telescope observations, one of the key legacy products from the SONS survey is to provide a comprehensive target list to observe at high angular resolution using submillimetre/millimetre interferometers (e.g., ALMA, SMA).

astro-ph.SR↗

arXiv2017

Cellular non-nonlinear network model of microbial fuel cell

A cellular non-linear network (CNN) is a uniform regular array of locally connected continuous-state machines, or nodes, which update their states simultaneously in discrete time. A microbial fuel cell (MFC) is an electro-chemical reactor using the metabolism of bacteria to drive an electrical current. In a CNN model of the MFC, each node takes a vector of states which represent geometrical characteristics of the cell, like the electrodes or impermeable borders, and quantify measurable properties like bacterial population, charges produced and hydrogen ions concentrations. The model allows the study of integral reaction of the MFC, including temporal outputs, to spatial disturbances of the bacterial population and supply of nutrients. The model can also be used to evaluate inhomogeneous configurations of bacterial populations attached on the electrode biofilms.

nlin.CG↗