arXiv subjects

Peng Zhang

Publications and source records attributed to Peng Zhang.

At least 505 records · Page 28Linked to original sources

arXiv2023

The performance of SiPM-based gamma-ray detector (GRD) of GECAM-C

As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Together with GECAM-A and GECAM-B launched in December 2020, GECAM-C will greatly improve the monitoring coverage, localization, as well as temporal and spectral measurements of gamma-ray transients. GECAM-C employs 12 SiPM-based Gamma-Ray Detectors (GRDs) to detect gamma-ray transients . In this paper, we firstly give a brief description of the design of GECAM-C GRDs, and then focus on the on-ground tests and in-flight performance of GRDs. We also did the comparison study of the SiPM in-flight performance between GECAM-C and GECAM-B. The results show GECAM-C GRD works as expected and is ready to make scientific observations.

astro-ph.IM↗

arXiv2023

Cross calibration of gamma-ray detectors (GRD) of GECAM-C

The gamma-ray detectors (GRDs) of GECAM-C onborad SATech-01 satellite is designed to monitor gamma-ray transients all over the sky from 6 keV to 6 MeV. The energy response matrix is the key to do spectral measurements of bursts, which is usually generated from GEANT4 simulation and partially verified by the ground calibration. In this work, energy response matrix of GECAM-C GRD is cross-calibrated with Fermi/GBM and Swift/BAT using a sample of Gamma-Ray Bursts (GRBs) and Soft Gamma-Ray Repeaters (SGRs). The calibration results show there is a good agreement between GECAM-C and other reasonably well calibrated instrument (i.e. Fermi/GBM and Swift/BAT). We also find that different GRD detectors of GECAM-C also show consistency with each other. All these results indicate that GECAM-C GRD can provide reliable spectral measurements.

astro-ph.IM↗

arXiv2023

Beamforming Design for RIS-Aided AF Relay Networks

Since reconfigurable intelligent surface (RIS) is considered to be a passive reflector for rate performance enhancement, a RIS-aided amplify-and-forward (AF) relay network is presented. By jointly optimizing the beamforming matrix at AF relay and the phase shifts matrices at RIS, two schemes are put forward to address a maximizing signal-to-noise ratio (SNR) problem. Firstly, aiming at achieving a high rate, a high-performance alternating optimization (AO) method based on Charnes-Cooper transformation and semidefinite programming (CCT-SDP) is proposed, where the optimization problem is decomposed to three subproblems solved by CCT-SDP and rank-one solutions can be recovered by Gaussian randomization. While the optimization variables in CCT-SDP method are matrices, which leads to extremely high complexity. In order to reduce the complexity, a low-complexity AO scheme based on Dinkelbachs transformation and successive convex approximation (DT-SCA) is put forward, where matrices variables are transformed to vector variables and three decoupled subproblems are solved by DT-SCA. Simulation results verify that compared to two benchmarks (i.e. a RIS-assisted AF relay network with random phase and a AF relay network without RIS), the proposed CCT-SDP and DT-SCA schemes can harvest better rate performance. Furthermore, it is revealed that the rate of the low-complexity DT-SCA method is close to that of CCT-SDP method.

cs.IT↗

arXiv2023

A Localization Method of High Energy Transients for All-Sky Gamma-Ray Monitor

Fast and reliable localization of high-energy transients is crucial for characterizing the burst properties and guiding the follow-up observations. Localization based on the relative counts of different detectors has been widely used for all-sky gamma-ray monitors. There are two major methods for this counts distribution localization: $χ^{2}$ minimization method and the Bayesian method. Here we propose a modified Bayesian method that could take advantage of both the accuracy of the Bayesian method and the simplicity of the $χ^{2}$ method. With comprehensive simulations, we find that our Bayesian method with Poisson likelihood is generally more applicable for various bursts than $χ^{2}$ method, especially for weak bursts. We further proposed a location-spectrum iteration approach based on the Bayesian inference, which could alleviate the problems caused by the spectral difference between the burst and location templates. Our method is very suitable for scenarios with limited computation resources or time-sensitive applications, such as in-flight localization software, and low-latency localization for rapid follow-up observations.

astro-ph.HE↗

arXiv2023

Proximity-induced quasi-one-dimensional superconducting quantum anomalous Hall state: a promising scalable top-down approach towards localized Majorana modes

In this work, ~100 nm wide quantum anomalous Hall insulator (QAHI) nanoribbons are etched from a two-dimensional QAHI film. One part of the nanoribbon is covered with superconducting Nb, while the other part is connected to an Au lead via two-dimensional QAHI regions. Andreev reflection spectroscopy measurements were performed, and multiple in-gap conductance peaks were observed in three different devices. In the presence of an increasing magnetic field perpendicular to the QAHI film, the multiple in-gap peak structure evolves into a single zero-bias conductance peak (ZBCP). Theoretical simulations suggest that the measurements are consistent with the scenario that the increasing magnetic field drives the nanoribbons from a multi-channel occupied regime to a single channel occupied regime, and that the ZBCP may be induced by zero energy Majorana modes as previously predicted [24]. Although further experiments are needed to clarify the nature of the ZBCP, we provide initial evidence that quasi-1D QAHI nanoribbon/superconductor heterostructures are new and promising platforms for realizing zero-energy Majorana modes.

cond-mat.supr-con↗

arXiv2023

A network-based biomarkers discovery of Cold/Hot ZHENG chronic gastritis and Cold/Hot herbs of formulae

Objective: To discover biomarkers and uncover the mechanism of Cold/Hot ZHENG (syndrome in traditional Chinese medicine) chronic gastritis (CG) and Cold/Hot herbs in traditional Chinese medicine (TCM) formulae on systematic biology. Background: CG is a common inflammatory disease and the diagnosis of CG in TCM can be classified into Cold ZHENG (Asthenic Cold) and Hot ZHENG (Excess Hot). However, the molecular features of Cold/Hot ZHENG in CG and the mechanism of Cold/Hot herbs in formulae for CG remained unclear. Methods: Based on data of 35 patients of Cold/Hot ZHENG CG and 3 scRNA-seq CG samples, we conduct analysis with transcriptomics datasets and algorithms, to discover biomarkers for Cold/Hot ZHENG CG. And we collected 25 formulae (with traditional effects related to Cold/Hot ZHENG) for CG and corresponding 89 Cold/Hot herbs (including Warm/Cool herbs) to discover features and construct target networks of Cold/Hot herbs on the basis of network target and enrichment analysis. Results: Biomarkers of Cold/Hot ZHENG CG represented by CCL2 and LEP suggested that Hot ZHENG CG might be characterized by over-inflammation and exuberant metabolism, and Cold ZHENG CG showed a trend of suppression in immune regulation and energy metabolism. And biomarkers of Cold/Hot ZHENG showed also significant changes in the progression of gastric cancer. And biomarkers and pathways of Hot herbs intend to regulate immune responses and energy metabolism, while those of Cold herbs were likely to participate in anti-inflammation effect. Conclusion: In this study, we found that the biomarkers and mechanism of Cold/Hot ZHENG CG and those of Cold/Hot herbs were closely related to the regulation of immune and metabolisms. These findings may reflect the mechanism, build bridges between multiple views of Cold/Hot ZHENG and Cold/Hot herbs, and provide a research paradigm for further achieving precision TCM.

q-bio.OT↗

arXiv2023

GIPA: A General Information Propagation Algorithm for Graph Learning

Graph neural networks (GNNs) have been widely used in graph-structured data computation, showing promising performance in various applications such as node classification, link prediction, and network recommendation. Existing works mainly focus on node-wise correlation when doing weighted aggregation of neighboring nodes based on attention, such as dot product by the dense vectors of two nodes. This may cause conflicting noise in nodes to be propagated when doing information propagation. To solve this problem, we propose a General Information Propagation Algorithm (GIPA in short), which exploits more fine-grained information fusion including bit-wise and feature-wise correlations based on edge features in their propagation. Specifically, the bit-wise correlation calculates the element-wise attention weight through a multi-layer perceptron (MLP) based on the dense representations of two nodes and their edge; The feature-wise correlation is based on the one-hot representations of node attribute features for feature selection. We evaluate the performance of GIPA on the Open Graph Benchmark proteins (OGBN-proteins for short) dataset and the Alipay dataset of Alibaba. Experimental results reveal that GIPA outperforms the state-of-the-art models in terms of prediction accuracy, e.g., GIPA achieves an average ROC-AUC of $0.8901\pm 0.0011$, which is better than that of all the existing methods listed in the OGBN-proteins leaderboard.

cs.LG↗

arXiv2023

Personalized Graph Signal Processing for Collaborative Filtering

The collaborative filtering (CF) problem with only user-item interaction information can be solved by graph signal processing (GSP), which uses low-pass filters to smooth the observed interaction signals on the similarity graph to obtain the prediction signals. However, the interaction signal may not be sufficient to accurately characterize user interests and the low-pass filters may ignore the useful information contained in the high-frequency component of the observed signals, resulting in suboptimal accuracy. To this end, we propose a personalized graph signal processing (PGSP) method for collaborative filtering. Firstly, we design the personalized graph signal containing richer user information and construct an augmented similarity graph containing more graph topology information, to more effectively characterize user interests. Secondly, we devise a mixed-frequency graph filter to introduce useful information in the high-frequency components of the observed signals by combining an ideal low-pass filter that smooths signals globally and a linear low-pass filter that smooths signals locally. Finally, we combine the personalized graph signal, the augmented similarity graph and the mixed-frequency graph filter by proposing a pipeline consisting of three key steps: pre-processing, graph convolution and post-processing. Extensive experiments show that PGSP can achieve superior accuracy compared with state-of-the-art CF methods and, as a nonparametric method, PGSP has very high training efficiency.

cs.IR↗

arXiv2023

ReGANIE: Rectifying GAN Inversion Errors for Accurate Real Image Editing

The StyleGAN family succeed in high-fidelity image generation and allow for flexible and plausible editing of generated images by manipulating the semantic-rich latent style space.However, projecting a real image into its latent space encounters an inherent trade-off between inversion quality and editability. Existing encoder-based or optimization-based StyleGAN inversion methods attempt to mitigate the trade-off but see limited performance. To fundamentally resolve this problem, we propose a novel two-phase framework by designating two separate networks to tackle editing and reconstruction respectively, instead of balancing the two. Specifically, in Phase I, a W-space-oriented StyleGAN inversion network is trained and used to perform image inversion and editing, which assures the editability but sacrifices reconstruction quality. In Phase II, a carefully designed rectifying network is utilized to rectify the inversion errors and perform ideal reconstruction. Experimental results show that our approach yields near-perfect reconstructions without sacrificing the editability, thus allowing accurate manipulation of real images. Further, we evaluate the performance of our rectifying network, and see great generalizability towards unseen manipulation types and out-of-domain images.

cs.CV↗

arXiv2023

Phy-Q as a measure for physical reasoning intelligence

Humans are well-versed in reasoning about the behaviors of physical objects and choosing actions accordingly to accomplish tasks, while it remains a major challenge for AI. To facilitate research addressing this problem, we propose a new testbed that requires an agent to reason about physical scenarios and take an action appropriately. Inspired by the physical knowledge acquired in infancy and the capabilities required for robots to operate in real-world environments, we identify 15 essential physical scenarios. We create a wide variety of distinct task templates, and we ensure all the task templates within the same scenario can be solved by using one specific strategic physical rule. By having such a design, we evaluate two distinct levels of generalization, namely the local generalization and the broad generalization. We conduct an extensive evaluation with human players, learning agents with varying input types and architectures, and heuristic agents with different strategies. Inspired by how human IQ is calculated, we define the physical reasoning quotient (Phy-Q score) that reflects the physical reasoning intelligence of an agent using the physical scenarios we considered. Our evaluation shows that 1) all agents are far below human performance, and 2) learning agents, even with good local generalization ability, struggle to learn the underlying physical reasoning rules and fail to generalize broadly. We encourage the development of intelligent agents that can reach the human level Phy-Q score. Website: https://github.com/phy-q/benchmark

cs.AI↗

arXiv2023

Low-damage electron beam lithography for nanostructures on Bi$_2$Te$_3$-class topological insulator thin films

Nanostructured topological insulators (TIs) have the potential to impact a wide array of condensed matter physics topics, ranging from Majorana physics to spintronics. However, the most common TI materials, the Bi$_2$Se$_3$ family, are easily damaged during nanofabrication of devices. In this paper, we show that electron beam lithography performed with a 30 or 50 kV accelerating voltage -- common for nanopatterning in academic facilities -- damages both nonmagnetic TIs and their magnetically-doped counterparts at unacceptable levels. We additionally demonstrate that electron beam lithography with a 10 kV accelerating voltage produces minimal damage detectable through low-temperature electronic transport. Although reduced accelerating voltages present challenges in creating fine features, we show that with careful choice of processing parameters, particularly the resist, 100 nm features are reliably achievable.

cond-mat.mes-hall↗

arXiv2023

GraphTheta: A Distributed Graph Neural Network Learning System With Flexible Training Strategy

Graph neural networks (GNNs) have been demonstrated as a powerful tool for analyzing non-Euclidean graph data. However, the lack of efficient distributed graph learning systems severely hinders applications of GNNs, especially when graphs are big and GNNs are relatively deep. Herein, we present GraphTheta, the first distributed and scalable graph learning system built upon vertex-centric distributed graph processing with neural network operators implemented as user-defined functions. This system supports multiple training strategies and enables efficient and scalable big-graph learning on distributed (virtual) machines with low memory. To facilitate graph convolutions, GraphTheta puts forward a new graph learning abstraction named NN-TGAR to bridge the gap between graph processing and graph deep learning. A distributed graph engine is proposed to conduct the stochastic gradient descent optimization with a hybrid-parallel execution, and a new cluster-batched training strategy is supported. We evaluate GraphTheta using several datasets with network sizes ranging from small-, modest- to large-scale. Experimental results show that GraphTheta can scale well to 1,024 workers for training an in-house developed GNN on an industry-scale Alipay dataset of 1.4 billion nodes and 4.1 billion attributed edges, with a cluster of CPU virtual machines (dockers) of small memory each (5$\sim$12GB). Moreover, GraphTheta can outperform DistDGL by up to $2.02\times$, with better scalability, and GraphLearn by up to $30.56\times$. As for model accuracy, GraphTheta is capable of learning as good GNNs as existing frameworks. To the best of our knowledge, this work presents the largest edge-attributed GNN learning task in the literature.

cs.LG↗

arXiv2023

A First Search for Solar $^8$B Neutrino in the PandaX-4T Experiment using Neutrino-Nucleus Coherent Scattering

A search for interactions from solar $^8$B neutrinos elastically scattering off xenon nuclei using PandaX-4T commissioning data is reported. The energy threshold of this search is further lowered compared with the previous search for dark matter, with various techniques utilized to suppress the background that emerges from data with the lowered threshold. A blind analysis is performed on the data with an effective exposure of 0.48 tonne$\cdot$year, and no significant excess of events is observed. Among results obtained using the neutrino-nucleus coherent scattering, our results give the best constraint on the solar $^8$B neutrino flux. We further provide a more stringent limit on the cross section between dark matter and nucleon in the mass range from 3 to 9 GeV/c$^2$.

hep-ex↗

arXiv2023

Quantum critical phase of FeO spans conditions of Earth's lower mantle

Earth's interior consists primarily of an insulating rocky mantle and a metallic iron-dominant core. Recent work has shown that mountain-scale structures at the core-mantle boundary may be highly enriched in FeO reported to exhibit high conductivity and metallic behavior at extreme pressure-temperature (P-T) conditions. However, the underlying electronic processes in FeO remain poorly understood and controversial. Here we systematically explore the electronic structure of B1-FeO at extreme conditions with large-scale theoretical modeling using state-of-the-art embedded dynamical mean field theory (eDMFT). Fine sampling of the phase diagram at more than 350 volume-temperature conditions reveals that, instead of sharp metallization, compression of FeO at high temperatures induces a gradual orbitally selective insulator-metal transition. Specifically, at P-T conditions of the lower mantle, FeO exists in an intermediate "quantum critical" state, characteristic of strongly correlated electronic matter. Transport in this regime, distinct from insulating or metallic behavior, is marked by incoherent diffusion of electrons in the conducting t_{2g} orbital and a band gap in the e_g orbital, resulting in moderate electrical conductivity (~ 10^5 S/m) with modest P -T dependence as observed in experiments. FeO-rich regions in Earth's lowermost mantle could thus influence electromagnetic interactions between the mantle and the core, producing several features observed in Earth's rotation and magnetic field evolution.

cond-mat.str-el↗

arXiv2023

AS-PD: An Arbitrary-Size Downsampling Framework for Point Clouds

Point cloud downsampling is a crucial pre-processing operation to downsample points in order to unify data size and reduce computational cost, to name a few. Recent research on point cloud downsampling has achieved great success which concentrates on learning to sample in a task-aware way. However, existing learnable samplers can not directly perform arbitrary-size downsampling, and assume the input size is fixed. In this paper, we introduce the AS-PD, a novel task-aware sampling framework that directly downsamples point clouds to any smaller size based on a sample-to-refine strategy. Given an input point cloud of arbitrary size, we first perform a task-agnostic pre-sampling on the input point cloud to a specified sample size. Then, we obtain the sampled set by refining the pre-sampled set to make it task-aware, driven by downstream task losses. The refinement is realized by adding each pre-sampled point with a small offset predicted by point-wise multi-layer perceptrons (MLPs). With the density encoding and proper training scheme, the framework can learn to adaptively downsample point clouds of different input sizes to arbitrary sample sizes. We evaluate sampled results for classification and registration tasks, respectively. The proposed AS-PD surpasses the state-of-the-art method in terms of downstream performance. Further experiments also show that our AS-PD exhibits better generality to unseen task models, implying that the proposed sampler is optimized to the task rather than a specified task model.

cs.CV↗

arXiv2023

Structural tuning magnetism and topology in a magnetic topological insulator

To date, the most widely-studied quantum anomalous Hall insulator (QAHI) platform is achieved by dilute doping of magnetic ions into thin films of the alloyed tetradymite topological insulator (TI) (Bi$_{1-x}$Sb$_x$)$_2$Te$_3$ (BST). In these films, long-range magnetic ordering of the transition metal substituants opens an exchange gap $Δ$ in the topological surface states, stabilizing spin-polarized, dissipationless edge channels with a nonzero Chern number $\mathcal{C}$. The long-range ordering of the spatially separated magnetic ions is itself mediated by electronic states in the host TI, leading to a sophisticated feedback between magnetic and electronic properties. Here we present a study of the electronic and magnetic response of a BST-based QAHI system to structural tuning via hydrostatic pressure. We identify a systematic closure of the topological gap under compressive strain accompanied by a simultaneous enhancement in the magnetic ordering strength. Combining these experimental results with first-principle calculations we identify structural deformation as a strong tuning parameter to traverse a rich topological phase space and modify magnetism in the magnetically doped BST system.

cond-mat.mes-hall↗

arXiv2022

Parameter-free Dynamic Graph Embedding for Link Prediction

Dynamic interaction graphs have been widely adopted to model the evolution of user-item interactions over time. There are two crucial factors when modelling user preferences for link prediction in dynamic interaction graphs: 1) collaborative relationship among users and 2) user personalized interaction patterns. Existing methods often implicitly consider these two factors together, which may lead to noisy user modelling when the two factors diverge. In addition, they usually require time-consuming parameter learning with back-propagation, which is prohibitive for real-time user preference modelling. To this end, this paper proposes FreeGEM, a parameter-free dynamic graph embedding method for link prediction. Firstly, to take advantage of the collaborative relationships, we propose an incremental graph embedding engine to obtain user/item embeddings, which is an Online-Monitor-Offline architecture consisting of an Online module to approximately embed users/items over time, a Monitor module to estimate the approximation error in real time and an Offline module to calibrate the user/item embeddings when the online approximation errors exceed a threshold. Meanwhile, we integrate attribute information into the model, which enables FreeGEM to better model users belonging to some under represented groups. Secondly, we design a personalized dynamic interaction pattern modeller, which combines dynamic time decay with attention mechanism to model user short-term interests. Experimental results on two link prediction tasks show that FreeGEM can outperform the state-of-the-art methods in accuracy while achieving over 36X improvement in efficiency. All code and datasets can be found in https://github.com/FudanCISL/FreeGEM.

cs.LG↗

arXiv2022

GECAM Localization of High Energy Transients and the Systematic Error

Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is a pair of microsatellites (i.e. GECAM-A and GECAM-B) dedicated to monitoring gamma-ray transients including gravitational waves high-energy electromagnetic counterparts, Gamma-ray Bursts, Soft Gamma-ray Repeaters, Solar Flares and Terrestrial Gamma-ray Flashes. Since launch in December 2020, GECAM-B has detected hundreds of astronomical and terrestrial events. For these bursts, localization is the key for burst identification and classification as well as follow-up observations in multi-wavelength. Here, we propose a Bayesian localization method with Poisson data with Gaussian background profile likelihood to localize GECAM bursts based on the burst counts distribution in detectors with different orientations. We demonstrate that this method can work well for all kinds of bursts, especially for extremely short ones. In addition, we propose a new method to estimate the systematic error of localization based on a confidence level test, which can overcome some problems of the existing method in literature. We validate this method by Monte Carlo simulations, and then apply it to a burst sample with accurate location and find that the mean value of the systematic error of GECAM-B localization is $\sim 2.5^{\circ}$. By considering this systematic error, we can obtain a reliable localization probability map for GECAM bursts. Our methods can be applied to other gamma-ray monitors.

astro-ph.IM↗