arXiv subjects

Qian Jiang

Publications and source records attributed to Qian Jiang.

26 records · Page 2Linked to original sources

arXiv2023

Simulation of magnetic hyperthermia cancer treatment near a blood vessel

In this study, we conduct a study on magnetic hyperthermia treatment when a vessel is located near the tumor. The holistic framework is established to solve the process of tumor treatment. The interstitial tissue fluid, MNP distribution, temperature profile, and nanofluids are involved in the simulation. The study evaluates the cancer treatment efficacy by cumulative-equivalent-minutes-at-43 centigrade (CEM43), a widely accepted thermal dose. The influence of the nearby blood vessel is investigated, and parameter studies about the distance to the tumor, the width of the blood vessel, and the vessel direction are also conducted. After that, the effects of the fluid-structure interaction of moving vessel boundaries and blood rheology are discussed. The results demonstrate the cooling effect of a nearby blood vessel, and such effect reduces with the augment of the distance between the tumor and blood vessel. The combination of downward gravity and the cool effect from the lower horizontal vessel leads to the best performance with 97.77% ablation in the tumor and 0.87% injury in healthy tissue at distance d = 4 mm, but the cases of the vertical vessel are relatively poor. The vessel width and blood rheology affect the treatment by velocity gradient near the vessel wall. Additionally, the moving boundary almost has no impact on treatment efficacy. The simulation tool has been well-validated and the outcomes can provide a useful reference to magnetic hyperthermia treatment.

physics.flu-dyn↗

arXiv2023

Simulation of tumor ablation in hyperthermia cancer treatment: A parametric study

A holistic simulation framework is established on magnetic hyperthermia modeling to solve the treatment process of tumor, which is surrounded by a healthy tissue block. The interstitial tissue fluid, MNP distribution, temperature profile, and nanofluids are involved in the simulation. Study evaluates the cancer treatment efficacy by cumulative-equivalent-minutes-at-43 centigrade (CEM43), a widely accepted thermal dose coming from the cell death curve. Results are separated into the conditions of with or without gravity effect in the computational domain, where two baseline case are investigated and compared. An optimal treatment time 46.55 min happens in the baseline case without gravity, but the situation deteriorates with gravity effect where the time for totally killing tumor cells prolongs 36.11% and meanwhile causing 21.32% ablation in healthy tissue. For the cases without gravity, parameter study of Lewis number and Heat source number are conducted and the variation of optimal treatment time are both fitting to the inverse functions. For the case considering the gravity, parameters Buoyancy ratio and Darcy ratio are investigated and their influence on totally killing tumor cells and the injury on healthy tissue are matching with the parabolic functions. The results are beneficial to the prediction of various conditions, and provides useful guide to the magnetic hyperthermia treatment.

physics.med-ph↗

arXiv2023

GRAINS: Proximity Sensing of Objects in Granular Materials

Proximity sensing detects an object's presence without contact. However, research has rarely explored proximity sensing in granular materials (GM) due to GM's lack of visual and complex properties. In this paper, we propose a granular-material-embedded autonomous proximity sensing system (GRAINS) based on three granular phenomena (fluidization, jamming, and failure wedge zone). GRAINS can automatically sense buried objects beneath GM in real-time manner (at least ~20 hertz) and perceive them 0.5 ~ 7 centimeters ahead in different granules without the use of vision or touch. We introduce a new spiral trajectory for the probe raking in GM, combining linear and circular motions, inspired by a common granular fluidization technique. Based on the observation of force-raising when granular jamming occurs in the failure wedge zone in front of the probe during its raking, we employ Gaussian process regression to constantly learn and predict the force patterns and detect the force anomaly resulting from granular jamming to identify the proximity sensing of buried objects. Finally, we apply GRAINS to a Bayesian-optimization-algorithm-guided exploration strategy to successfully localize underground objects and outline their distribution using proximity sensing without contact or digging. This work offers a simple yet reliable method with potential for safe operation in building habitation infrastructure on an alien planet without human intervention.

cs.RO↗

arXiv2023

Understanding and Constructing Latent Modality Structures in Multi-modal Representation Learning

Contrastive loss has been increasingly used in learning representations from multiple modalities. In the limit, the nature of the contrastive loss encourages modalities to exactly match each other in the latent space. Yet it remains an open question how the modality alignment affects the downstream task performance. In this paper, based on an information-theoretic argument, we first prove that exact modality alignment is sub-optimal in general for downstream prediction tasks. Hence we advocate that the key of better performance lies in meaningful latent modality structures instead of perfect modality alignment. To this end, we propose three general approaches to construct latent modality structures. Specifically, we design 1) a deep feature separation loss for intra-modality regularization; 2) a Brownian-bridge loss for inter-modality regularization; and 3) a geometric consistency loss for both intra- and inter-modality regularization. Extensive experiments are conducted on two popular multi-modal representation learning frameworks: the CLIP-based two-tower model and the ALBEF-based fusion model. We test our model on a variety of tasks including zero/few-shot image classification, image-text retrieval, visual question answering, visual reasoning, and visual entailment. Our method achieves consistent improvements over existing methods, demonstrating the effectiveness and generalizability of our proposed approach on latent modality structure regularization.

cs.LG↗

arXiv2022

MC-LCR: Multi-modal contrastive classification by locally correlated representations for effective face forgery detection

As the remarkable development of facial manipulation technologies is accompanied by severe security concerns, face forgery detection has become a recent research hotspot. Most existing detection methods train a binary classifier under global supervision to judge real or fake. However, advanced manipulations only perform small-scale tampering, posing challenges to comprehensively capture subtle and local forgery artifacts, especially in high compression settings and cross-dataset scenarios. To address such limitations, we propose a novel framework named Multi-modal Contrastive Classification by Locally Correlated Representations(MC-LCR), for effective face forgery detection. Instead of specific appearance features, our MC-LCR aims to amplify implicit local discrepancies between authentic and forged faces from both spatial and frequency domains. Specifically, we design the shallow style representation block that measures the pairwise correlation of shallow feature maps, which encodes local style information to extract more discriminative features in the spatial domain. Moreover, we make a key observation that subtle forgery artifacts can be further exposed in the patch-wise phase and amplitude spectrum and exhibit different clues. According to the complementarity of amplitude and phase information, we develop a patch-wise amplitude and phase dual attention module to capture locally correlated inconsistencies with each other in the frequency domain. Besides the above two modules, we further introduce the collaboration of supervised contrastive loss with cross-entropy loss. It helps the network learn more discriminative and generalized representations. Through extensive experiments and comprehensive studies, we achieve state-of-the-art performance and demonstrate the robustness and generalization of our method.

cs.CV↗

arXiv2021

EH-DNAS: End-to-End Hardware-aware Differentiable Neural Architecture Search

In hardware-aware Differentiable Neural Architecture Search (DNAS), it is challenging to compute gradients of hardware metrics to perform architecture search. Existing works rely on linear approximations with limited support to customized hardware accelerators. In this work, we propose End-to-end Hardware-aware DNAS (EH-DNAS), a seamless integration of end-to-end hardware benchmarking, and fully automated DNAS to deliver hardware-efficient deep neural networks on various platforms, including Edge GPUs, Edge TPUs, Mobile CPUs, and customized accelerators. Given a desired hardware platform, we propose to learn a differentiable model predicting the end-to-end hardware performance of neural network architectures for DNAS. We also introduce E2E-Perf, an end-to-end hardware benchmarking tool for customized accelerators. Experiments on CIFAR10 and ImageNet show that EH-DNAS improves the hardware performance by an average of $1.4\times$ on customized accelerators and $1.6\times$ on existing hardware processors while maintaining the classification accuracy.

cs.LG↗

arXiv2021

FFR_FD: Effective and Fast Detection of DeepFakes Based on Feature Point Defects

The internet is filled with fake face images and videos synthesized by deep generative models. These realistic DeepFakes pose a challenge to determine the authenticity of multimedia content. As countermeasures, artifact-based detection methods suffer from insufficiently fine-grained features that lead to limited detection performance. DNN-based detection methods are not efficient enough, given that a DeepFake can be created easily by mobile apps and DNN-based models require high computational resources. For the first time, we show that DeepFake faces have fewer feature points than real ones, especially in certain facial regions. Inspired by feature point detector-descriptors to extract discriminative features at the pixel level, we propose the Fused Facial Region_Feature Descriptor (FFR_FD) for effective and fast DeepFake detection. FFR_FD is only a vector extracted from the face, and it can be constructed from any feature point detector-descriptors. We train a random forest classifier with FFR_FD and conduct extensive experiments on six large-scale DeepFake datasets, whose results demonstrate that our method is superior to most state of the art DNN-based models.

cs.CV↗

arXiv2014

A Modified Schur Method for Robust Pole Assignment in State Feedback Control

Recently, a \textbf{SCHUR} method was proposed in \cite{Chu2} to solve the robust pole assignment problem in state feedback control. It takes the departure from normality of the closed-loop system matrix $A_c$ as the measure of robustness, and intends to minimize it via the real Schur form of $A_c$. The \textbf{SCHUR} method works well for real poles, but when complex conjugate poles are involved, it does not produce the real Schur form of $A_c$ and can be problematic. In this paper, we put forward a modified Schur method, which improves the efficiency of \textbf{SCHUR} when complex conjugate poles are to be assigned. Besides producing the real Schur form of $A_c$, our approach also leads to a relatively small departure from normality of $A_c$. Numerical examples show that our modified method produces better or at least comparable results than both \textbf{place} and \textbf{robpole} algorithms, with much less computational costs.

math.OC↗