arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 325 records · Page 18Linked to original sources

arXiv2020

Intelligent Reflecting Surface Aided Wireless Communications: A Tutorial

Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be efficiently integrated into wireless networks, such as reflection optimization, channel estimation, and deployment from communication design perspectives. In this paper, we provide a tutorial overview of IRS-aided wireless communication to address the above issues, and elaborate its reflection and channel models, hardware architecture and practical constraints, as well as various appealing applications in wireless networks. Moreover, we highlight important directions worthy of further investigation in future work.

cs.IT↗

arXiv2020

3D UAV Trajectory and Communication Design for Simultaneous Uplink and Downlink Transmission

In this paper, we investigate the unmanned aerial vehicle (UAV)-aided simultaneous uplink and downlink transmission networks, where one UAV acting as a disseminator is connected to multiple access points, and the other UAV acting as a base station (BS) collects data from numerous sensor nodes. The goal of this paper is to maximize the sum of the UAV-BS and UAV-AP system throughput by jointly optimizing the 3D UAV trajectory, communication scheduling, and UAV-AP/SN transmit power. We first consider a special case where the UAV-BS and UAV-AP trajectories are pre-determined. Although the resulting problem is an integer and non-convex optimization problem, a globally optimal solution is obtained by applying the polyblock outer approximation (POA) method based on the problem's hidden monotonic structure. Subsequently, for the general case considering the 3D UAV trajectory optimization, an efficient iterative algorithm is proposed to alternately optimize the divided sub-problem based on the successive convex approximation (SCA) technique. Numerical results demonstrate that the proposed design is able to achieve significant system throughput gain over the benchmarks. In addition, the SCA-based method can achieve nearly the same performance as the POA based method with much lower computational complexity.

cs.IT↗

arXiv2020

Pilot Decontamination for Massive MIMO Network with UAVs

This letter studies the pilot contamination (PC) problem for massive multiple-input multiple-output (MIMO) networks with coexisting terrestrial users and unmanned aerial vehicles (UAVs). Due to the strong line-of-sight (LoS) air-to-ground channels between UAVs and base stations (BSs), UAVs usually cause a more severe PC issue as compared to the traditional terrestrial users. To mitigate the PC caused by UAVs, we propose a low-complexity distributed scheme by exploiting the full-dimensional beamforming of massive MIMO BSs and the angle-dependent LoS channels between them and high-altitude UAVs. Numerical results show the effectiveness of the proposed pilot decontamination scheme and the significant signal-to-interference-plus-noise ratio (SINR) gains in both the uplink and downlink after pilot decontamination.

cs.IT↗

arXiv2020

White Paper on Broadband Connectivity in 6G

This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface Assisted Anti-Jamming Communications: A Fast Reinforcement Learning Approach

Malicious jamming launched by smart jammers can attack legitimate transmissions, which has been regarded as one of the critical security challenges in wireless communications. With this focus, this paper considers the use of an intelligent reflecting surface (IRS) to enhance anti-jamming communication performance and mitigate jamming interference by adjusting the surface reflecting elements at the IRS. Aiming to enhance the communication performance against a smart jammer, an optimization problem for jointly optimizing power allocation at the base station (BS), and reflecting beamforming at the IRS is formulated while considering quality of service (QoS) requirements of legitimate users. As the jamming model and jamming behavior are dynamic and unknown, a fuzzy win or learn fast-policy hill-climbing (WoLFPHC) learning approach is proposed to jointly optimize the anti-jamming power allocation and reflecting beamforming strategy, where WoLFPHC is capable of quickly achieving the optimal policy without the knowledge of the jamming model, and fuzzy state aggregation can represent the uncertain environment states as aggregate states. Simulation results demonstrate that the proposed anti-jamming learning-based approach can efficiently improve both the IRS-assisted system rate and transmission protection level compared with existing solutions.

eess.SP↗

arXiv2020

Energy Management and Trajectory Optimization for UAV-Enabled Legitimate Monitoring Systems

Thanks to their quick placement and high flexibility, unmanned aerial vehicles (UAVs) can be very useful in the current and future wireless communication systems. With a growing number of smart devices and infrastructure-free communication networks, it is necessary to legitimately monitor these networks to prevent crimes. In this paper, a novel framework is proposed to exploit the flexibility of the UAV for legitimate monitoring via joint trajectory design and energy management. The system includes a suspicious transmission link with a terrestrial transmitter and a terrestrial receiver, and a UAV to monitor the suspicious link. The UAV can adjust its positions and send jamming signal to the suspicious receiver to ensure successful eavesdropping. Based on this model, we first develop an approach to minimize the overall jamming energy consumption of the UAV. Building on a judicious (re-)formulation, an alternating optimization approach is developed to compute a locally optimal solution in polynomial time. Furthermore, we model and include the propulsion power to minimize the overall energy consumption of the UAV. Leveraging the successive convex approximation method, an effective iterative approach is developed to find a feasible solution fulfilling the Karush-Kuhn-Tucker (KKT) conditions. Extensive numerical results are provided to verify the merits of the proposed schemes.

eess.SP↗

arXiv2020

Generalized Wireless-Powered Communications: When to Activate Wireless Power Transfer?

Wireless-powered communication network (WPCN) is a key technology to power energy-limited massive devices, such as on-board wireless sensors in autonomous vehicles, for Internet-of-Things (IoT) applications. Conventional WPCNs rely only on dedicated downlink wireless power transfer (WPT), which is practically inefficient due to the significant energy loss in wireless signal propagation. Meanwhile, ambient energy harvesting is highly appealing as devices can scavenge energy from various existing energy sources (e.g., solar energy and cellular signals). Unfortunately, the randomness of the availability of these energy sources cannot guarantee stable communication services. Motivated by the above, we consider a generalized WPCN where the devices can not only harvest energy from a dedicated multiple-antenna power station (PS), but can also exploit stored energy stemming from ambient energy harvesting. Since the dedicated WPT consumes system resources, if the stored energy is sufficient, WPT may not be needed to maximize the weighted sum rate (WSR). To analytically characterize this phenomenon, we derive the condition for WPT activation and reveal how it is affected by the different system parameters. Subsequently, we further derive the optimal resource allocation policy for the cases that WPT is activated and deactivated, respectively. In particular, it is found that when WPT is activated, the optimal energy beamforming at the PS does not depend on the devices' stored energy, which is shown to lead to a new unfairness issue. Simulation results verify our theoretical findings and demonstrate the effectiveness of the proposed optimal resource allocation.

cs.IT↗

arXiv2020

Robust and Secure Beamforming for Intelligent Reflecting Surface Aided mmWave MISO Systems

In this letter, we investigate the robust and secure beamforming (RSBF) in an intelligent reflecting surface (IRS) aided millimeter wave (mmWave) multiple input single output (MISO) system, where multiple single antenna eavesdroppers (Eves) are arbitrarily distributed nearby the legitimate receiver. Considering the channel state information (CSI) of Eves' channels is imperfectly known at the legitimate transmitter, the RSBF design problems to maximize the worst case of achievable secrecy rate (ASR) are formulated under the total transmission power and unit-modulus constraints. Since the problems are difficult to solve optimally due to their nonconvexity and coupled variables, we substitute the wiretap channels by a weighted combination of discrete samples and propose a RSBF scheme based on alternating optimization and semidefinite relaxation (SDR) techniques, for both colluding and noncolluding eavesdropping scenarios. Simulation results show that the proposed RSBF scheme can effectively improve the ASR and also outperforms other benchmark schemes.

cs.IT↗

arXiv2020

A Novel Alternative Optimization Method for Joint Power and Trajectory Design in UAV-Enabled Wireless Network

This letter aims to maximize the average throughput via the joint design of the transmit power and trajectory for unmanned aerial vehicle (UAV)-enabled network. The conventional way to tackle this problem is based on the alternating optimization (AO) method by iteratively updating power and trajectory until convergence, resulting in a non-convex trajectory subproblem which is difficult to deal with. To develop more efficient methods, we propose a novel AO method by incorporating both power and trajectory into an intermediate variable, and then iteratively updating power and the newly introduced variable. This novel variable transformation makes it easier to decompose the original problem into two convex subproblems, namely a throughput maximization subproblem and a feasibility subproblem. Consequently, both of these subproblems can be solved in a globally optimal fashion. We further propose a low-complexity algorithm for the feasibility subproblem by exploiting the alternating directional method of multipliers (ADMM), whose updating step is performed in closed-form solutions. Simulation results demonstrate that our proposed method reduces the computation time by orders of magnitude, while achieving higher performance than the conventional methods.

eess.SP↗

arXiv2020

Joint Power Control and Passive Beamforming in IRS-Assisted Spectrum Sharing

In cognitive radio (CR) communication systems, achieving high secondary user (SU) rate in the presence of strong cross-link interference with the primary user (PU) is challenging. In this letter, we exploit the emerging intelligent reflecting surface (IRS) technology to tackle this problem. Specifically, we investigate an IRS-assisted CR communication system where an IRS is deployed to assist in the spectrum sharing between a PU link and an SU link. We aim to maximize the achievable SU rate subject to a given signal-to-interference-plus-noise ratio target for the PU link, by jointly optimizing the SU transmit power and IRS reflect beamforming. Since the formulated problem is difficult to solve due to its non-convexity and coupled variables, we propose an efficient algorithm based on alternating optimization and successive convex approximation techniques to solve it sub-optimally, along with some heuristic designs for lower complexity. Simulation results show that IRS is able to significantly improve the SU rate, even for the scenarios deemed most challenging in conventional CR systems without using IRS.

cs.IT↗

arXiv2020

Green MU-MIMO/SIMO Switching for Heterogeneous Delay-aware Services with Constellation Optimization

In this paper, we propose adaptive techniques for multi-user multiple input and multiple output~(MU-MIMO) cellular communication systems, to solve the problem of energy efficient communications with heterogeneous delay-aware traffic. In order to minimize the total transmission power of the MU-MIMO, we investigate the relationship between the transmission power and the M-ary quadrature amplitude modulation~(MQAM) constellation size and get the energy efficient modulation for each transmission stream based on the minimum mean square error~(MMSE) receiver.Since the total power consumption is different for MU-MIMO and multi-user single input and multiple output~(MU-SIMO), by exploiting the intrinsic relationship among the total power consumption model, and heterogeneous delay-aware services, we propose an adaptive transmission strategy, which is a switching between MU-MIMO and MU-SIMO. Simulations show that in order to maximize the energy efficiency and consider different Quality of Service (QoS) of delay for the users simultaneously, the users should adaptively choose the constellation size for each stream as well as the transmission mode.

eess.SP↗

arXiv2020

Joint Optimization of User Association, Subchannel Allocation, and Power Allocation in Multi-cell Multi-association OFDMA Heterogeneous Networks

Heterogeneous network is a novel network architecture proposed in Long-Term-Evolution~(LTE), which highly increases the capacity and coverage compared with the conventional networks. However, in order to provide the best services, appropriate resource management must be applied. In this paper, we consider the joint optimization problem of user association, subchannel allocation, and power allocation for downlink transmission in Multi-cell Multi-association Orthogonal Frequency Division Multiple Access (OFDMA) heterogeneous networks. To solve the optimization problem, we first divide it into two subproblems: 1) user association and subchannel allocation for fixed power allocation; 2) power allocation for fixed user association and subchannel allocation. Subsequently, we obtain a locally optimal solution for the joint optimization problem by solving these two subproblems alternately. For the first subproblem, we derive the globally optimal solution based on graph theory. For the second subproblem, we obtain a Karush-Kuhn-Tucker (KKT) optimal solution by a low complexity algorithm based on the difference of two convex functions approximation (DCA) method. In addition, the multi-antenna receiver case and the proportional fairness case are also discussed. Simulation results demonstrate that the proposed algorithms can significantly enhance the overall network throughput.

eess.SP↗

arXiv2020

Energy-Efficient Buffer-Aided Relaying Systems with Opportunistic Spectrum Access

In this paper, an energy-efficient cross-layer design framework is proposed for cooperative relaying networks, which takes into account the influence of spectrum utilization probability. Specifically, random arrival traffic is considered and an adaptive modulation and coding (AMC) scheme is adopted in the cooperative transmission system to improve the system performance. The average packet dropping rate of the relay-buffer is studied at first. With the packet dropping rate and stationary distribution of the system state, the closed-form expression of the delay is derived. Then the energy efficiency for relay-assisted transmission is investigated, which takes into account the queueing process of the relay and the source. In this context, an energy efficiency optimization problem is formulated to determine the optimum strategy of power and time allocation for the relay-assisted cooperative system. Finally, the energy efficient switching strategy between the relay assisted transmission and the direct transmission is obtained, where packet transmissions have different delay requirements. In addition, energy efficient transmission policy with AMC is obtained. Numerical results demonstrate the effectiveness of the proposed design improving the energy efficiency.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface: Practical Phase Shift Model and Beamforming Optimization

Intelligent reflecting surface (IRS) that enables the control of wireless propagation environment has recently emerged as a promising cost-effective technology for boosting the spectrum and energy efficiency in future wireless communication systems. Prior works on IRS are mainly based on the ideal phase shift model assuming the full signal reflection by each of the elements regardless of its phase shift, which, however, is practically difficult to realize. In contrast, we propose in this paper the practical phase shift model that captures the phase-dependent amplitude variation in the element-wise reflection coefficient. Based on the proposed model and considering an IRS-aided multiuser system with an IRS deployed to assist in the downlink communications from a multi-antenna access point (AP) to multiple single-antenna users, we formulate an optimization problem to minimize the total transmit power at the AP by jointly designing the AP transmit beamforming and the IRS reflect beamforming, subject to the users' individual signal-to-interference-plus-noise ratio (SINR) constraints. Iterative algorithms are proposed to find suboptimal solutions to this problem efficiently by utilizing the alternating optimization (AO) or penalty-based optimization technique. Moreover, we analyze the asymptotic performance loss of the IRS-aided system that employs practical phase shifters but assumes the ideal phase shift model for beamforming optimization, as the number of IRS elements goes to infinity. Simulation results unveil substantial performance gains achieved by the proposed beamforming optimization based on the practical phase shift model as compared to the conventional ideal model.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface-Assisted Multiple Access with User Pairing: NOMA or OMA?

The integration of intelligent reflecting surface (IRS) to multiple access networks is a cost-effective solution for boosting spectrum/energy efficiency and enlarging network coverage/connections. However, due to the new capability of IRS in reconfiguring the wireless propagation channels, it is fundamentally unknown which multiple access scheme is superior in the IRS-assisted wireless network. In this letter, we pursue a theoretical performance comparison between non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) in the IRS-assisted downlink communication, for which the transmit power minimization problems are formulated under the discrete unit-modulus reflection constraint on each IRS element. We analyze the minimum transmit powers required by different multiple access schemes and compare them numerically, which turn out to not fully comply with the stereotyped superiority of NOMA over OMA in conventional systems without IRS. Moreover, to avoid the exponential complexity of the brute-force search for the optimal discrete IRS phase shifts, we propose a low-complexity solution to achieve near-optimal performance.

cs.IT↗

arXiv2020

Beamforming Optimization for Wireless Network Aided by Intelligent Reflecting Surface with Discrete Phase Shifts

Intelligent reflecting surface (IRS) is a cost-effective solution for achieving high spectrum and energy efficiency in future wireless networks by leveraging massive low-cost passive elements that are able to reflect the signals with adjustable phase shifts. Prior works on IRS mainly consider continuous phase shifts at reflecting elements, which are practically difficult to implement due to the hardware limitation. In contrast, we study in this paper an IRS-aided wireless network, where an IRS with only a finite number of phase shifts at each element is deployed to assist in the communication from a multi-antenna access point (AP) to multiple single-antenna users. We aim to minimize the transmit power at the AP by jointly optimizing the continuous transmit precoding at the AP and the discrete reflect phase shifts at the IRS, subject to a given set of minimum signal-to-interference-plus-noise ratio (SINR) constraints at the user receivers. The considered problem is shown to be a mixed-integer non-linear program (MINLP) and thus is difficult to solve in general. To tackle this problem, we first study the single-user case with one user assisted by the IRS and propose both optimal and suboptimal algorithms for solving it. Besides, we analytically show that as compared to the ideal case with continuous phase shifts, the IRS with discrete phase shifts achieves the same squared power gain in terms of asymptotically large number of reflecting elements, while a constant proportional power loss is incurred that depends only on the number of phase-shift levels. The proposed designs for the single-user case are also extended to the general setup with multiple users among which some are aided by the IRS. Simulation results verify our performance analysis as well as the effectiveness of our proposed designs as compared to various benchmark schemes.

cs.IT↗

arXiv2020

Weighted Sum Power Maximization for Intelligent Reflecting Surface Aided SWIPT

The low efficiency of far-field wireless power transfer (WPT) limits the fundamental rate-energy (R-E) performance trade-off of the simultaneous wireless information and power transfer (SWIPT) system. To address this challenge, we propose in this letter a new SWIPT system aided by the emerging intelligent reflecting surface (IRS) technology. By leveraging massive low-cost passive elements that are able to reflect the signals with adjustable phase shifts, IRS achieve a high passive beamforming gain, which is appealing for drastically enhancing the WPT efficiency and thereby the R-E trade-off of SWIPT systems. We consider an IRS being deployed to assist a multi-antenna access point (AP) to serve multiple information decoding receivers (IDRs) and energy harvesting receivers (EHRs). We aim to maximize the weighted sum-power received by EHRs via jointly optimizing the transmit precoders at the AP and reflect phase shifts at the IRS, subject to the individual signal-to-interference-plus-noise ratio (SINR) constraints for IDRs. Since this problem is non-convex, we propose efficient algorithms to obtain suboptimal solutions for it. In particular, we prove that it is sufficient to send information signals only at the AP to serve both IDRs and EHRs regardless of their channel realizations. Moreover, simulation results show significant performance gains achieved by our proposed designs over benchmark schemes.

cs.IT↗

arXiv2019

Intelligent Reflecting Surface Assisted Secrecy Communication: Is Artificial Noise Helpful or Not?

In this letter, we investigate whether the use of artificial noise (AN) is helpful to enhance the secrecy rate of an intelligent reflecting surface (IRS) assisted wireless communication system. Specifically, an IRS is deployed nearby a single-antenna receiver to assist in the transmission from a multi-antenna transmitter, in the presence of multiple single-antenna eavesdroppers. Aiming to maximize the achievable secrecy rate, a design problem for jointly optimizing transmit beamforming with AN or jamming and IRS reflect beamforming is formulated, which is however difficult to solve due to its non-convexity and coupled variables. We thus propose an efficient algorithm based on alternating optimization to solve the problem sub-optimally. Simulation results show that incorporating AN in transmit beamforming is beneficial under the new setup with IRS reflect beamforming. In particular, it is unveiled that the IRS-aided design without AN even performs worse than the AN-aided design without IRS as the number of eavesdroppers near the IRS increases.

cs.IT↗