arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 73 records · Page 4Linked to original sources

arXiv2026

Joint Antenna Rotation and IRS Beamforming for Multi-User Uplink Communications

Rotatable antenna (RA) enhances wireless coverage through directional gain steering, yet suffers from performance degradation under physical blockages. Intelligent reflecting surface (IRS) establishes reflective paths to bypass obstacles, but suffers from angular mismatch when deployed in the side-lobe region of base station (BS) antennas. To address this issue, we propose a new RA-enabled IRS-assisted multi-user uplink system, in which the BS antennas are capable of flexibly adjusting their 3D orientations to align their boresights with the IRS. We formulate a sum rate maximization problem by jointly optimizing the antenna 3D rotations, receive beamforming and IRS phase shifts. To tackle this non-convex problem, we propose an efficient alternating optimization (AO) algorithm. Specifically, we iteratively update the antenna rotations via projected gradient ascent (PGA), compute the receive beamforming via a closed-form solution, and optimize the IRS phase shifts via fractional programming (FP). Numerical results demonstrate that the proposed system yields significant performance gains over conventional fixed-antenna systems, especially under large angular misalignments.

cs.IT↗

arXiv2026

Two-Scale Spatial Deployment for Cost-Effective Wireless Networks via Cooperative IRSs and Movable Antennas

This paper proposes a two-scale spatial deployment strategy to ensure reliable coverage for multiple target areas, integrating macroscopic intelligent reflecting surfaces (IRSs) and fine-grained movable antennas (MAs). Specifically, IRSs are selectively deployed from candidate sites to shape the propagation geometry, while MAs are locally repositioned among discretized locations to exploit small-scale channel variations. The objective is to minimize the total deployment cost of MAs and IRSs by jointly optimizing the IRS site selection, MA positions, transmit precoding, and IRS phase shifts, subject to the signal-to-noise ratio (SNR) requirements for all target areas. This leads to a challenging mixed-integer non-convex optimization problem that is intractable to solve directly. To address this, we first formulate an auxiliary problem to verify the feasibility. A penalty-based double-loop algorithm integrating alternating optimization and successive convex approximation (SCA) is developed to solve this feasibility issue, which is subsequently adapted to obtain a suboptimal solution for the original cost minimization problem. Finally, based on the obtained solution, we formulate an element refinement problem to further reduce the deployment cost, which is solved by a penalty-based SCA algorithm. Simulation results demonstrate that the proposed designs consistently outperform benchmarks relying on independent area planning or full IRS deployment in terms of cost-efficiency. Moreover, for cost minimization, MA architectures are preferable in large placement apertures, whereas fully populated FPA architectures excel in compact ones; for worst-case SNR maximization, MA architectures exhibit a lower cost threshold for feasibility, while FPA architectures can attain peak SNR at a lower total cost.

eess.SP↗

arXiv2026

Coverage and Spectral Efficiency of NOMA-Enabled LEO Satellite Networks with Ordering Schemes

This paper investigates an analytical model for low-earth orbit (LEO) multi-satellite downlink non-orthogonal multiple access (NOMA) networks. The satellites transmit data to multiple NOMA user terminals (UTs), each employing successive interference cancellation (SIC) for decoding. Two ordering schemes are adopted for NOMA-enabled LEO satellite networks, i.e., mean signal power (MSP)-based ordering and instantaneous signal-to-inter-satellite-interference-plus-noise ratio (ISINR)-based ordering. For each ordering scheme, we derive the analytical expression for the coverage probability of each typical UT. Moreover, we discuss how coverage is influenced by SIC, main-lobe gain, and tradeoffs between the number of satellites and their altitudes. Additionally, two user fairness-based power allocation (PA) schemes are considered, and PA coefficients with the optimal number of UTs that maximize their sum spectral efficiency (SE) are studied. Simulation results show that there exists a maximum effective signal-to-inter-satellite-interference-plus-noise ratio (SINR) threshold for each PA scheme that ensures the operation of NOMA in LEO satellite networks, and NOMA provides performance gains only when the target SINR is below a certain threshold. Compared with orthogonal multiple access (OMA), NOMA increases UTs' sum SE by as much as 35%. Furthermore, for most SINR thresholds, the sum SE increases with the number of UTs to the highest value, whilst the maximum sum SE is obtained when there are two UTs.

eess.SP↗

arXiv2026

Two-Timescale Design for Movable Antenna-Enabled Multiuser MIMO Systems

Movable antennas (MAs), which can be swiftly repositioned within a defined region, offer a promising solution to the limitations of fixed-position antennas (FPAs) in adapting to spatial variations in wireless channels, thereby improving channel conditions and communication between transceivers. However, frequent MA position adjustments based on instantaneous channel state information (CSI) incur high operational complexity, making real-time CSI acquisition impractical, especially in fast-fading channels. To address these challenges, we propose a two-timescale transmission framework for MA-enabled multiuser multiple-input-multiple-output (MU-MIMO) systems. In the large timescale, statistical CSI is exploited to optimize MA positions for long-term ergodic performance, whereas, in the small timescale, beamforming vectors are designed using instantaneous CSI to handle short-term channel fluctuations. Within this new framework, we analyze the ergodic sum rate and develop efficient MA position optimization algorithms for both maximum-ratio-transmission (MRT) and zero-forcing (ZF) beamforming schemes. These algorithms employ alternating optimization (AO), successive convex approximation (SCA), and majorization-minimization (MM) techniques, iteratively optimizing antenna positions and refining surrogate functions that approximate the ergodic sum rate. Numerical results show significant ergodic sum rate gains with the proposed two-timescale MA design over conventional FPA systems, particularly under moderate to strong line-of-sight (LoS) conditions. Notably, MA with ZF beamforming consistently outperforms MA with MRT, highlighting the synergy between beamforming and MAs for superior interference management in environments with moderate Rician factors and high user density, while MA with MRT can offer a simplified alternative to complex beamforming designs in strong LoS conditions.

eess.SP↗

arXiv2026

Integrating Movable Antennas and Intelligent Reflecting Surfaces (MA-IRS): Fundamentals, Practical Solutions, and ISAC

Movable antennas (MAs) and intelligent reflecting surfaces (IRSs) enable active antenna repositioning and passive phase-shift tuning for channel reconfiguration, respectively. Integrating MAs and IRSs boosts spatial degrees of freedom, significantly enhancing wireless network capacity, coverage, and reliability. In this article, we first present the fundamentals of MA-IRS integration, involving clarifying the key design issues, revealing performance gain, and identifying the conditions where MA-IRS synergy persists. Then, we examine practical challenges and propose pragmatic design solutions, including optimization schemes, hardware architectures, deployment strategies, and robust designs for hardware impairments and mobility management. In addition, we highlight how MA-IRS architectures uniquely support advanced integrated sensing and communication, enhancing sensing performance and dual-functional flexibility. Overall, MA-IRS integration emerges as a compelling approach toward next-generation reconfigurable wireless systems.

eess.SP↗

arXiv2025

Dual-IRS Aided Near-/Hybrid-Field SWIPT: Passive Beamforming and Independent Antenna Power Splitting Design

This paper proposes a novel dual-intelligent reflecting surface (IRS) aided interference-limited simultaneous wireless information and power transfer (SWIPT) system with independent power splitting (PS), where each receiving antenna applies different PS factors to offer an advantageous trade-off between the useful information and harvested energy. We separately establish the near- and hybrid-field channel models for IRS-reflected links to evaluate the performance gain more precisely and practically. Specifically, we formulate an optimization problem of maximizing the harvested power by jointly optimizing dual-IRS phase shifts, independent PS ratio, and receive beamforming vector in both near- and hybrid-field cases. In the near-field case, the alternating optimization algorithm is proposed to solve the non-convex problem by applying the Lagrange duality method and the difference-of-convex (DC) programming. In the hybrid-field case, we first present an interesting result that the AP-IRS-user channel gains are invariant to the phase shifts of dual-IRS, which allows the optimization problem to be transformed into a convex one. Then, we derive the asymptotic performance of the combined channel gains in closed-form and analyze the characteristics of the dual-IRS. Numerical results validate our analysis and indicate the performance gains of the proposed scheme that dual-IRS-aided SWIPT with independent PS over other benchmark schemes.

eess.SP↗

arXiv2025

Reconfigurable Intelligent Surface-Enhanced Satellite Networks: Deployment Strategies, Key Capabilities, Practical Solutions, and Future Directions

Satellite networks promise wide-area 6G coverage but face two persistent barriers: blockage-induced service discontinuities and increasingly stringent spectrum coexistence across satellite layers and with terrestrial systems. Reconfigurable intelligent surfaces (RISs) act as low-power programmable apertures that redirect energy without the cost and power consumption of fully active arrays. We develop a deployment-first, operations-aware view of RIS-enabled satellite networking that treats RIS as both satellite/terminal antennas and inter-satellite or space-ground relays. We show that system-level gains are governed by two unifying mechanisms: connectivity restoration via virtual line-of-sight links that preserve connectivity under blockage and mobility, and angular selectivity that reshapes interference to enlarge spectrum reuse. We further discuss practical operation under high mobility, highlighting Delay-Doppler channel acquisition, predictive beam tracking, and control designs that budget overhead and latency, and summarize hardware considerations for reliable operation in space. Finally, we outline forward-looking opportunities in the generative artificial intelligence paradigm, multifunctional RIS architectures, ubiquitous satellite integrated sensing and communication, and sustainable satellite Internet-of-Things.

eess.SP↗

arXiv2025

Which Channel in 6G, Low-rank or Full-rank, more needs RIS from a Perspective of DoF?

Reconfigurable intelligent surface (RIS), as an efficient tool to improve receive signal-to-noise ratio, extend coverage and create more spatial diversity, is viewed as a most promising technique for the future wireless networks like 6G. As you know, RIS is very suitable for a special wireless scenario with wireless link between BS and users being completely blocked, i.e., no link. In this paper, we extend its applications to a general scenario, i.e., rank-deficient channel, particularly some extremely low-rank ones such as no link, and line-of-sight (LoS, rank-one). Actually, there are several potential important low-rank applications like low-altitude, satellite, UAV, marine, and deep-space communications. In such a situation, it is found that RIS may make a dramatic degrees of freedom (DoF) enhancement over no RIS. By using a distributed RISs placement, the DoF of channel from BS to user in LoS channel may be even boosted from a low-rank like 0/1 to full-rank. This will achieve an extremely rate improvement via spatial parallel multiple-stream transmission from BS to user. In this paper, we present a complete review of making an in-depth discussion on DoF effect of RIS.

eess.SP↗

arXiv2025

Intelligent Metasurface-Enabled Integrated Sensing and Communication: Unified Framework and Key Technologies

As the demand for ubiquitous connectivity and high-precision environmental awareness grows, integrated sensing and communication (ISAC) has emerged as a key technology for sixth-generation (6G) wireless networks. Intelligent metasurfaces (IMs) have also been widely adopted in ISAC scenarios due to their efficient, programmable control over electromagnetic waves. This provides a versatile solution that meets the dual-function requirements of next-generation networks. Although reconfigurable intelligent surfaces (RISs) have been extensively studied for manipulating the propagation channel between base and mobile stations, the full potential of IMs in ISAC transceiver design remains under-explored. Against this backdrop, this article explores emerging IM-enabled transceiver designs for ISAC systems. It begins with an overview of representative IM architectures, their unique principles, and their inherent advantages in EM wave manipulation. Next, a unified ISAC framework is established to systematically model the design and derivation of diverse IM-enabled transceiver structures. This lays the foundation for performance optimization, trade-offs, and analysis. The paper then discusses several critical technologies for IM-enabled ISAC transceivers, including dedicated channel modeling, effective channel estimation, tailored beamforming strategies, and dual-functional waveform design.

eess.SP↗

arXiv2025

Semi-Passive IRS Enabled Sensing with Group Movable Sensors

The performance of the sensing system is limited by the signal attenuation and the number of receiving components. In this letter, we investigate the sensor position selection in a semi-passive intelligent reflecting surface (IRS) enabled non-line-of-sight (NLoS) sensing system. The IRS consists of passive elements and active sensors, where the sensors can receive and process the echo signal for direction-of-arrival (DoA) estimation. Motivated by the movable antenna array and fluid antenna system, we consider the case where the sensors are integrated into a group for movement and derive the corresponding Cramer-Rao bound (CRB). Then, the optimal solution for the positions of the movable sensors (MSs) to the CRB minimization problem is derived in closed form. Moreover, we characterize the relationship between the CRB and system parameters. Theoretical analysis and numerical results are provided to demonstrate the superiority of the proposed MS scheme over the fixed-position (FP) scheme.

eess.SP↗

arXiv2025

Fair Rate Maximization for Multi-User Multi-Cell MISO Communication Systems via Novel Transmissive RIS Transceiver

This paper explores a multi-cell multiple-input single-output (MISO) downlink communication system enabled by a unique transmissive reconfigurable intelligent surface (TRIS) transceiver configuration. Within this system framework, we formulate an optimization problem for the purpose of maximizing the minimum rate of users for each cell via designing the transmit beamforming of the TRIS transceiver, subject to the power constraints of each TRIS transceiver unit. Since the objective function is non-differentiable, the max-min rate problem is difficult to solve. In order to tackle this challenging optimization problem, an efficient low-complexity optimization algorithm is developed. Specifically, the log-form rate function is transformed into a tractable form by employing the fractional programming (FP) methodology. Next, the max-min objective function can be approximated using a differentiable function derived from smooth approximation theory. Moreover, by applying the majorization-minimization (MM) technique and examining the optimality conditions, a solution is proposed that updates all variables analytically without relying on any numerical solvers. Numerical results are presented to demonstrate the convergence and effectiveness of the proposed low-complexity algorithm. Additionally, the algorithm can significantly reduce the computational complexity without performance loss. Furthermore, the simulation results illustrate the clear superiority of the deployment of the TRIS transceiver over the benchmark schemes.

eess.SP↗

arXiv2025

Movable Intelligent Surface-Enabled Wireless Communications: Static Phase Shifts with Mechanical Reconfigurability

Intelligent surfaces that reshape electromagnetic waves are regarded as disruptive technologies for wireless networks. However, existing designs sit at two costly extremes: dynamic reconfigurable intelligent surfaces (RISs) offer fine beam control but require dense cabling, continuous power consumption, and substantial signaling overhead, whereas low-cost static surfaces require no control lines or electronics but are limited to a single beam pattern. This disparity leaves a practical gap for quasi-static environments, such as industrial Internet-of-things and smart agriculture scenarios, where channels are stable with user demands changing only occasionally or periodically, and neither extreme is sufficiently economical or flexible. To bridge this gap, we propose a novel movable intelligent surface (MIS) architecture, whose beam patterns are switched not by electronic phase tuning but by mechanically sliding a small, pre-phased secondary metasurface layer across a larger, likewise static primary layer. We develop an MIS signal model that characterizes the interaction between static phase elements with dynamic geometry via binary selection matrices. Based on this model, we formulate a new type of optimization problems that jointly design static phase shifts and the overlapping position selection of MS2 (equal to beam pattern scheduling). Efficient algorithms based on the penalty method, block coordinate descent, and Riemannian manifold optimization are proposed to tackle these mixed-integer non-convex problems. Simulation results demonstrate that the proposed MIS architecture substantially narrows the performance gap between single-layer static surfaces and dynamic RISs, providing a practical and flexible solution for quasi-static wireless applications.

eess.SP↗

arXiv2025

Fluid Antenna System-Enabled UAV-to-Ground Communications

Fluid antenna systems (FAS) have emerged as a revolutionary technology offering enhanced spatial diversity within a compact form factor. Concurrently, unmanned aerial vehicles (UAVs) are integral to future networks, necessitating channel models that capture both multipath fading and shadowing. This letter presents a novel performance analysis of a UAV-to-ground link, where the receiver is equipped with an $N$-port FAS operating over the challenging double-shadowing fading channel. By adapting a tractable eigenvalue-based approximation for the correlated FAS ports, we derive new analytical expressions for the end-to-end signal-to-noise ratio statistics, namely the cumulative distribution function and the probability density function. Based on these statistics, we present exact integral expressions for the outage probability, average bit error rate, and average channel capacity. We further derive new, tractable closed-form solutions for the average bit error rate and capacity for the practical dual-rank, independent but non-identically distributed case. Finally, a key asymptotic analysis reveals that the system achieves a multiplicative diversity order of $G_d = M \times d$, which is precisely the product of the FAS spatial rank $M$ and the intrinsic channel diversity order $d$. Simulation results are provided to validate the high accuracy of our entire theoretical framework.

cs.IT↗

arXiv2025

Cramér-Rao Bound Optimization for Fluid Antenna-Empowered Integrated Sensing and Uplink Communication System

Integrated sensing and communication (ISAC) is a promising solution for the future sixth-generation (6G) system. However, classical fixed-position antenna (FPA) ISAC systems fail to fully utilize spatial degrees of freedom (DoFs), resulting in limited gains for both radar sensing and communication functionalities. This challenge can be addressed by the emerging novel fluid antenna (FA) technology, which can pursue better channel conditions and improve sensing and communication performances. In this paper, we aim to minimize the Cramér-Rao bound (CRB) for estimating the target's angle while guaranteeing communication performance. This involves jointly optimizing active beamforming, power allocation, receiving filters, and FA position configurations, which is a highly non-convex problem. To tackle this difficulty, we propose an efficient iterative solution that analytically optimizes all variables without relying on numerical solvers, i.e., CVX. Specifically, by leveraging cutting-edge majorization-minimization (MM) and penalty-dual-decomposition (PDD) methods, we develop a low-complexity algorithm to solve the beamformer configuration problem containing the fractional and quartic terms. Numerical simulation results demonstrate the effectiveness and efficiency of our proposed algorithm, highlighting significant performance improvements achieved by employing FA in the ISAC system.

eess.SP↗

arXiv2025

Channel Ordering for Fairness in Elastic Optical Networks via a LLM-Guided Bottleneck TSP Solver

In flexible-grid elastic optical networks (EONs), the ordering of frequency channels plays a crucial role in managing inter-channel interference and ensuring signal quality. We address the Channel Ordering Problem (COP) by reformulating it as a Bottleneck Traveling Salesman Problem (BTSP), where interference among channels is represented as edge weights in a graph structure. To tackle this challenge efficiently, we develop a scalable approach that integrates statistical exploration with guidance from large language models (LLMs). Extensive simulations using both the Gaussian Noise (GN) model and the split-step Fourier method demonstrate that our method achieves near-optimal signal-to-noise ratio (SNR) performance and offers robust scalability across diverse network settings, making it well-suited for practical deployment in large-scale optical communication systems.

physics.optics↗

arXiv2025

Joint Optimization for Multi-User Transmissive RIS-MIMO Systems

Transmissive reconfigurable intelligent surfaces (RIS) represent a transformative architecture for future wireless networks, enabling a paradigm shift from traditional costly base stations to low-cost, energy-efficient transmitters. This paper explores a downlink multi-user MIMO system where a transmissive RIS, illuminated by a single feed antenna, forms the core of the transmitter. The joint optimization of the RIS coefficient vector, power allocation, and receive beamforming in such a system is critical for performance but poses significant challenges due to the non-convex objective, coupled variables, and constant modulus constraints. To address these challenges, we propose a novel optimization framework. Our approach involves reformulating the sum-rate maximization problem into a tractable equivalent form and developing an efficient alternating optimization (AO) algorithm. This algorithm decomposes the problem into subproblems for the RIS coefficients, receive beamformers, and power allocation, each solved using advanced techniques including convex approximation and difference-of-convex programming. Simulation results demonstrate that our proposed method converges rapidly and achieves substantial sum-rate gains over conventional schemes, validating the effectiveness of our approach and highlighting the potential of transmissive RIS as a key technology for next-generation wireless systems.

cs.IT↗

arXiv2025

Reconfigurable Airspace: Synergizing Movable Antenna and Intelligent Surface for Low-Altitude ISAC Networks

Low-altitude unmanned aerial vehicle (UAV) networks are integral to future 6G integrated sensing and communication (ISAC) systems. However, their deployment is hindered by challenges stemming from high mobility of UAVs, complex propagation environments, and the inherent trade-offs between coexisting sensing and communication functions. This article proposes a novel framework that leverages movable antennas (MAs) and intelligent reflecting surfaces (IRSs) as dual enablers to overcome these limitations. MAs, through active transceiver reconfiguration, and IRSs, via passive channel reconstruction, can work in synergy to significantly enhance system performance. Our analysis first elaborates on the fundamental gains offered by MAs and IRSs, and provides simulation results that validate the immense potential of the MA-IRS-enabled ISAC architecture. Two core UAV deployment scenarios are then investigated: (i) UAVs as ISAC users, where we focus on achieving high-precision tracking and aerial safety, and (ii) UAVs as aerial network nodes, where we address robust design and complex coupled resource optimization. Finally, key technical challenges and research opportunities are identified and analyzed for each scenario, charting a clear course for the future design of advanced low-altitude ISAC networks.

cs.IT↗

arXiv2025

Joint Space Time Coding on RIS for Simultaneous Direct Modulation and Beamforming

Reconfigurable Intelligent Surface (RIS)-based direct modulation communication systems have garnered significant attention due to their low cost, low power consumption, and baseband-less characteristics. However, these systems face challenges such as the random time-varying coding state of the RIS and the difficulty in implementing beamforming in direct modulation. In this paper, we propose a simple and effective joint space-time coding approach for RIS that enables simultaneous realization of both direct modulation communication and beamforming. By modeling the transmitted signals of the RIS using space-time coding, we show that the time coding determines the direct modulation functionality, while the space coding governs the beamforming. Consequently, we introduce a joint time-space coding technique by performing exclusive-or (XOR) operations on the time and space coding sequences, enabling both functionalities to be achieved concurrently. Numerical simulations demonstrate the effectiveness of the proposed method. Furthermore, we design and fabricate a transmissive 1-bit phase reconfigurable RIS operating in the 3.4~3.79 GHz frequency band for the implementation of a direct modulation communication system. Experimental results reveal that the bit error rate (BER) is significantly reduced when joint space-time coding is used, compared to using time coding alone. Additionally, the root-mean-square error vector magnitude (rmsEVM) of the constellation diagram is reduced by 55%. This technique is promising for applications in the Internet of Things (IoT), contributing to the development of intelligent networks for electronic devices.

cs.IT↗