Search arXivSearch

arXiv subjects

R. Assmann

Publications and source records attributed to R. Assmann.

At least 19 recordsLinked to original sources

LEP3: A High-Luminosity e+e- Higgs and ElectroweakFactory in the LHC Tunnel

As stated in the 2019 European Strategy for Particle Physics (ESPP), it is of the utmost importance that the HL-LHC upgrade of the accelerator and the experiments be successfully completed in a timely manner. All necessary efforts should be devoted to achieving this goal. We also recall two of the principal recommendations of the 2019 ESPP for future accelerator initiatives, namely that 1) An electron-positron Higgs factory is the highest priority for the next collider (Rec. c). 2) Europe, together with its international partners, should investigate the technical and financial feasibility of a future hadron collider at CERN with a centre-of-mass energy of at least 100 TeV and with an electron-positron Higgs and electroweak factory as a possible first stage (Rec. e). A major objective in particle physics is always to operate an accelerator that allows a leap of an order of magnitude in the constituent centre-of-mass energy with respect to the previous one. We support FCC-ee and FCC-hh as the preferred option for CERN future, as it addresses both of the above recommendations. The guidance for the 2025 ESPP requests, in addition to the preferred option, the inclusion of ``prioritised alternatives to be pursued if the chosen preferred option turns out not to be feasible or competitive''. Proposed alternatives to the preferred FCC option include linear, muon colliders and LHeC accelerators. In response to this request we propose reusing the existing LHC tunnel for an electron-positron collider, called LEP3, as a back-up alternative if the FCC cannot proceed. LEP3 leverages much of the R\&D conducted for FCC-ee, offers high-precision studies of Z, W, and Higgs bosons below the tt threshold, and offers potential physics performance comparable or superior to other fallback options at a lower cost while supporting continued R\&D towards a next-generation energy frontier machine.

physics.acc-ph

Snowmass'21 Accelerator Frontier Report

In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report.

physics.acc-ph

Report of Snowmass 21 Accelerator Frontier Topical Group 6 on Advanced Accelerators

The Snowmass 2021 Accelerator Frontier topical group \# 6 on Advanced Accelerator Concepts, covers new R\&D concepts for particle acceleration, generation, and focusing. Based on community input, this report describes how leveraging these concepts to efficiently harness the interaction of charged particles with extremely high electromagnetic fields at very high frequencies can provide the keys to reaching ultra high acceleration gradients (GeV/m and beyond). These methods have potential to reduce the dimensions, C0$_2$ footprint, and costs of future high energy physics machines, with added potential to reduce power consumption for future e+e- and $\gamma - \gamma$ machines to and beyond 15 TeV energies. Techniques range from laser and beam driven plasma and advanced structure accelerators to advanced phase space manipulations and generation of beams with extreme parameters.

physics.acc-ph

Predicting the transverse emittance of space charge dominated beams using the phase advance scan technique and a fully connected neural network

The transverse emittance of a charged particle beam is an important figure of merit for many accelerator applications, such as ultra-fast electron diffraction, free electron lasers and the operation of new compact accelerator concepts in general. One of the easiest to implement methods to determine the transverse emittance is the phase advance scan method using a focusing element and a screen. This method has been shown to work well in the thermal regime. In the space charge dominated laminar flow regime, however, the scheme becomes difficult to apply, because of the lack of a closed description of the beam envelope including space charge effects. Furthermore, certain mathematical, as well as beamline design criteria must be met in order to ensure accurate results. In this work we show that it is possible to analyze phase advance scan data using a fully connected neural network (FCNN), even in setups, which do not meet these criteria. In a simulation study, we evaluate the perfomance of the FCNN by comparing it to a traditional fit routine, based on the beam envelope equation. Subsequently, we use a pre-trained FCNN to evaluate measured phase advance scan data, which ultimately yields much better agreement with numerical simulations. To tackle the confirmation bias problem, we employ additional mask-based emittance measurement techniques.

physics.acc-ph

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

physics.acc-ph

Advanced Accelerator Concepts

Recent years have seen spectacular progress in the development of innovative acceleration methods that are not based on traditional RF accelerating structures. These novel developments are at the interface of laser, plasma and accelerator physics and may potentially lead to much more compact and cost-effective accelerator facilities. While primarily focusing on the ability to accelerate charged particles with much larger gradients than traditional RF structures, these new techniques have yet to demonstrate comparable performances to RF structures in terms of both beam parameters and reproducibility. To guide the developments beyond the necessary basic R&D and concept validations, a common understanding and definition of required performance and beam parameters for an operational user facility is now needed. These innovative user facilities can include "table-top" light sources, medical accelerators, industrial accelerators or even high-energy colliders. This paper will review the most promising developments in new acceleration methods and it will present the status of on-going projects.

physics.acc-ph

Summary of strong-field QED Workshop

A workshop, "Probing strong-field QED in electron--photon interactions", was held in DESY, Hamburg in August 2018, gathering together experts from around the world in this area of physics as well as the accelerator, laser and detector technology that underpins any planned experiment. The aim of the workshop was to bring together experts and those interested in measuring QED in the presence of strong fields at and above the Schwinger critical field. The pioneering experiment, E144 at SLAC, measured multi-photon absorption in Compton scattering and $e^+e^-$ pair production in electron--photon interactions but never reached the Schwinger critical field value. With the advances in laser technology, in particular, new experiments are being considered which should be able to measure non-perturbative QED and its transition from the perturbative regime. This workshop reviewed the physics case and current theoretical predictions for QED and even effects beyond the Standard Model in the interaction of a high-intensity electron bunch with the strong field of the photons from a high-intensity laser bunch. The world's various electron beam facilities were reviewed, along with the challenges of producing and delivering laser beams to the interaction region. Possible facilities and sites that could host such experiments were presented, with a view to experimentally realising the Schwinger critical field in the lab during the 2020s.

hep-ex

Controlling injection using a magnetic field to produce sub-femtosecond bunches in the laser wakefield accelerator

It is shown that electron injection into a laser-driven plasma bubble can be manipulated by applying an external magnetic field in the presence of a plasma density gradient. The down-ramp of the density-tailored plasma locally reduces the plasma wave phase velocity, which triggers injection. The longitudinal magnetic field dynamically induces an expanding hole in the electron density distribution at the rear of the wake bubble, which reduces the peak electron velocity in its vicinity. Electron injection is suppressed when the electron velocity drops below the phase velocity, which depends on the size of the density hole. This enables the start and end of electron injection to be independently controlled, which allows generation of sub-femtosecond electron bunches with peak currents of a few kilo-Ampere, for an applied magnetic field of $\sim 10$ Tesla.

physics.plasm-ph

Performance analysis of the prototype THz-driven electron gun for the AXSIS project

The AXSIS project (Attosecond X-ray Science: Imaging and Spectroscopy) aims to develop a THz-driven compact X-ray source for applications e.g. in chemistry and biology by using ultrafast coherent diffraction imaging and spectroscopy. The key components of AXSIS are the THz-driven electron gun and THz-driven dielectric loaded linear accelerator as well as an inverse Compton scattering scheme for the X-rays production. This paper is focused on the prototype of the THz-driven electron gun which is capable of accelerating electrons up to tens of keV. Such a gun was manufactured and tested at the test-stand at DESY. Due to variations in gun fabrication and generation of THz-fields the gun is not exactly operated at design parameters. Extended simulations have been performed to understand the experimentally observed performance of the gun. A detailed comparison between simulations and experimental measurements is presented in this paper.

physics.acc-ph

Beam Dynamics and Tolerance Studies of the THz-driven Electron Linac for the AXSIS Experiment

A dielectric-loaded linac powered by THz-pulses is one of the key parts of the "Attosecond X-ray Science: Imaging and Spectroscopy" (AXSIS) project at DESY, Hamburg. As in conventional accelerators, the AXSIS linac is designed to have phase velocity equal to the speed of light which, in this case, is realized by tuning the thickness of the dielectric layer and the radius of the vacuum channel. Therefore, structure fabrication errors will lead to a change in the beam dynamics and beam quality. Additionally, errors in the bunch injection will also affect the acceleration process and can cause beam loss on the linac wall. This paper numerically investigates the process of electron beam acceleration in the AXSIS linac, taking into account the aforementioned errors. Particle tracking simulations were done using the code ECHO, which uses a low-dispersive algorithm for the field calculation and was specially adapted for the dielectric-loaded accelerating structures.

physics.acc-ph

Status and Objectives of the Dedicated Accelerator R&D Facility "SINBAD" at DESY

We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of this experiment ranging from the study of compression techniques to sub-fs level to its application as injector for various advanced acceleration schemes e.g. the plans to use ARES as a test-site for DLA experiments in the context of the ACHIP collaboration. The time-line including the planned extension with laser driven plasma-wakefield acceleration is presented. The second initial experiment is AXSIS which aims to accelerate fs-electron bunches to 15\,MeV in a THz driven dielectric structure and subsequently create X-rays by inverse Compton scattering.

physics.acc-ph

Radiation damage and thermal shock response of carbon-fiber-reinforced materials to intense high-energy proton beams

A comprehensive study on the effects of energetic protons on carbon-fiber composites and compounds under consideration for use as low-Z pion production targets in future high-power accelerators and low-impedance collimating elements for intercepting TeV-level protons at the Large Hadron Collider has been undertaken addressing two key areas, namely, thermal shock absorption and resistance to irradiation damage.

physics.acc-ph

Chirp mitigation of plasma-accelerated beams using a modulated plasma density

Plasma-based accelerators offer the possibility to drive future compact light sources and high-energy physics applications. Achieving good beam quality, especially a small beam energy spread, is still one of the major challenges. For stable transport, the beam is located in the focusing region of the wakefield which covers only the slope of the accelerating field. This, however, imprints a longitudinal energy correlation (chirp) along the bunch. Here, we propose an alternating focusing scheme in the plasma to mitigate the development of this chirp and thus maintain a small energy spread.

physics.acc-ph

AWAKE, The Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected to sample the wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented.

physics.acc-ph

Path to AWAKE: Evolution of the concept

This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1].

physics.plasm-ph

Proton-driven plasma wakefield acceleration: a path to the future of high-energy particle physics

New acceleration technology is mandatory for the future elucidation of fundamental particles and their interactions. A promising approach is to exploit the properties of plasmas. Past research has focused on creating large-amplitude plasma waves by injecting an intense laser pulse or an electron bunch into the plasma. However, the maximum energy gain of electrons accelerated in a single plasma stage is limited by the energy of the driver. Proton bunches are the most promising drivers of wakefields to accelerate electrons to the TeV energy scale in a single stage. An experimental program at CERN -- the AWAKE experiment -- has been launched to study in detail the important physical processes and to demonstrate the power of proton-driven plasma wakefield acceleration. Here we review the physical principles and some experimental considerations for a future proton-driven plasma wakefield accelerator.

physics.acc-ph

Channeling and Volume Reflection Based Crystal Collimation of Tevatron Circulating Beam Halo (T-980)

The T980 crystal collimation experiment is underway at the Tevatron to determine if this technique could increase 980 GeV beam-halo collimation efficiency at high-energy hadron colliders such as the Tevatron and the LHC. T980 also studies various crystal types and parameters. The setup has been substantially enhanced during the Summer 2009 shutdown by installing a new O-shaped crystal in the horizontal goniometer, as well as adding a vertical goniometer with two alternating crystals (O-shaped and multi-strip) and additional beam diagnostics. First measurements with the new system are quite encouraging, with channeled and volume-reflected beams observed on the secondary collimators as predicted. Investigation of crystal collimation efficiencies with crystals in volume reflection and channeling modes are described in comparison with an amorphous primary collimator. Results on the system performance are presented for the end-of-store studies and for entire collider stores. The first investigation of colliding beam collimation simultaneously using crystals in both the vertical and horizontal plane has been made in the regime with horizontally channeled and vertically volume-reflected beams. Planning is underway for significant hardware improvements during the FY10 summer shutdown and for dedicated studies during the final year of Tevatron operation and also for a "post-collider beam physics running" period.

physics.acc-ph

Development of hollow electron beams for proton and ion collimation

Magnetically confined hollow electron beams for controlled halo removal in high-energy colliders such as the Tevatron or the LHC may extend traditional collimation systems beyond the intensity limits imposed by tolerable material damage. They may also improve collimation performance by suppressing loss spikes due to beam jitter and by increasing capture efficiency. A hollow electron gun was designed and built. Its performance and stability were measured at the Fermilab test stand. The gun will be installed in one of the existing Tevatron electron lenses for preliminary tests of the hollow-beam collimator concept, addressing critical issues such as alignment and instabilities of the overlapping proton and electron beams.

physics.acc-ph