arXiv subjects

Robin Harper

Publications and source records attributed to Robin Harper.

18 recordsLinked to original sources

arXiv2026

Error correction on an array of superconducting qubits with defective components

A solid-state quantum-computing architecture will require the fabrication of arrays of many coupled qubits. It is inevitable that this process will produce qubits and couplers with varying performance, with some components underperforming due to imperfect fabrication. Quantum error-correction requires high-performing components and hence these defects must be dealt with, either by adapting the code to exclude the defects, or by informing the decoder to accommodate defects in post-processing. Here we implement and compare strategies to operate distance-5 surface codes on a quantum processor consisting of a square-lattice array of 120 superconducting qubits. We demonstrate a dramatic reduction in the probability of a logical error in a memory experiment by excluding underperforming components, compared with both a standard approach of ignoring defects, and a defect-aware decoding approach. We observe up to 2.8X improvement in logical errors per round when excluding defects compared with the standard defect-ignorant approach (1.62% compared to 4.49%). In contrast, defect-aware decoding gives only modest gains. Defects are also expected to be particularly harmful for measurement-based logical operations. Using a stability experiment we show that excluding defects resurrects measurement-based logic gate performance, observing a 6.3% per-round suppression of failure rate when excluding defects, compared to zero suppression otherwise. Furthermore, we show a further substantial decrease in logical errors when using leakage post-selection in combination with our defect exclusion strategies, resulting in a distance-5 code outperforming the best distance-3 in one basis. Our experiments therefore give a proof-of-principle demonstration of the essential utility of defect exclusion methods in the scale-up of solid-state quantum computing approaches.

quant-ph↗

arXiv2026

Scalable quantum error correction tailored for a heavy-hex qubit array

To produce an operable quantum computer that is made with imperfect hardware, we must design and test scalable quantum error correcting codes that are suited for the devices we can build and, in unison, develop decoding strategies that accommodate device-specific noise characteristics. Here, we introduce the \emph{dynamic compass code}, a subsystem code with a novel syndrome extraction cycle, that has a competitive threshold while making efficient use of qubits arranged on a heavy-hex lattice. We use a superconducting qubit array to implement a distance-5 instance of this code, and demonstrate how detailed noise characterisation can boost decoder performance to yield significant improvements in logical error rates. We perform averaged circuit eigenvalue sampling (ACES) to acquire detailed context-dependent error information on all elements of the syndrome extraction process. Furthermore, we leverage soft information produced from measurement devices to augment the decoder with measurement error information and detect leakage errors for exclusion through post-selection. Our noise-informed approach yields up to 38.3\% improvement in the logical error rate of a distance-5 implementation of the dynamic compass code in experiment.

quant-ph↗

arXiv2026

Low-valency scalable quantum error correction with a dynamic compass code

The ongoing development of hardware that is capable of reliably executing general quantum algorithms requires quantum error-correcting codes that are both practical for realisation and rapidly reduce logical error rates as they are scaled up. Here we introduce the dynamic compass code, a code that can be implemented with a modest footprint on the heavy-hex lattice while also demonstrating a threshold. The dynamic code is obtained by choosing a novel measurement schedule for the syndrome extraction circuit of the heavy-hex subsystem code. We numerically evaluate its performance and observe that different choices of schedule can provide a trade-off in protection against logical errors in the $X$ vs $Z$ basis. We also demonstrate that this new measurement schedule provides the code with a threshold for stability experiments. We finally show how the dynamic compass code could be used for fault-tolerant logic by illustrating lattice surgery between code patches.

quant-ph↗

arXiv2025

Characterizing physical and logical errors in a transversal CNOT via cycle error reconstruction

The development of prototype quantum information processors has progressed to a stage where small instances of logical qubit systems perform better than the best of their physical constituents. Advancing towards fault-tolerant quantum computing will require an understanding of the underlying error mechanisms in logical primitives as they relate to the performance of quantum error correction. In this work we demonstrate the novel capability to characterize the physical error properties relevant to fault-tolerant operations via cycle error reconstruction. We illustrate this diagnostic capability for a transversal CNOT, a prototypical component of quantum logical operations, in a 16-qubit register of a trapped-ion quantum computer. Our error characterization technique offers three key capabilities: (i) identifying context-dependent physical layer errors, enabling their mitigation; (ii) contextualizing component gates in the environment of logical operators, validating the performance differences in terms of characterized component-level physics, and (iii) providing a scalable method for predicting quantum error correction performance using pertinent error terms, differentiating correctable versus uncorrectable physical layer errors. The methods with which our results are obtained have scalable resource requirements that can be extended with moderate overhead to capture overall logical performance in increasingly large and complex systems.

quant-ph↗

arXiv2025

Characterising the failure mechanisms of error-corrected quantum logic gates

Mid-circuit measurements used in quantum error correction are essential in quantum computer architecture, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance.

quant-ph↗

arXiv2025

Improving error suppression with noise-aware decoding

We demonstrate that the performance of quantum error correction can be improved with noise-aware decoders that are calibrated to the likelihood of physical error configurations in a device. We show that noise-aware decoding increases the error suppression factor of the surface code, yielding reductions in the logical error rate that increase exponentially with the code distance. Our calibration protocol involves circuit-level Pauli noise characterisation experiments with averaged circuit eigenvalue sampling. This enables decoder calibration at the scales required for fault-tolerant quantum computation and near-optimal decoding when compared to the true noise model. Our results indicate that these noise characterisation experiments could be performed and processed in seconds for superconducting quantum computers. This establishes the practicality and utility of noise-aware decoding for quantum error correction at scale.

quant-ph↗

arXiv2024

Scalable noise characterization of syndrome-extraction circuits with averaged circuit eigenvalue sampling

Characterising the performance of noisy quantum circuits is central to the production of prototype quantum computers and can enable improved quantum error correction that exploits noise biases identified in a quantum device. We develop a scalable noise characterisation protocol suited to characterising the syndrome extraction circuits of quantum error correcting codes, a key component of fault-tolerant architectures. Our protocol builds upon averaged circuit eigenvalue sampling (ACES), a framework for noise characterisation experiments that simultaneously estimates the Pauli error probabilities of all gates in a Clifford circuit and captures averaged spatial correlations between gates implemented simultaneously in the layers of the circuit. By rigorously analysing the performance of noise characterisation experiments in the ACES framework, we derive a figure of merit for their expected performance, allowing us to optimise their experimental design and improve the precision to which we estimate noise given fixed experimental resources. We demonstrate the scalability and performance of our protocol through circuit-level numerical simulations of the entire noise characterisation procedure for the syndrome extraction circuit of a distance-25 surface code with over 1000 qubits. Our results indicate that detailed noise characterisation methods are scalable to near-term quantum devices. We release our code in the form of the Julia package QuantumACES.

quant-ph↗

arXiv2024

Logical Noise Bias in Magic State Injection

Fault-tolerant architectures aim to reduce the noise of a quantum computation. Despite such architectures being well studied a detailed understanding of how noise is transformed in a fault-tolerant primitive such as magic state injection is currently lacking. We use numerical simulations of logical process tomography on a fault-tolerant gadget that implements a logical $T = Z(\pi/4)$ gate using magic state injection, to understand how noise characteristics at the physical level are transformed into noise characteristics at the logical level. We show how, in this gadget, a significant phase ($Z$) bias can arise in the logical noise, even with unbiased noise at the physical level. While the magic state injection gadget intrinsically induces biased noise, with extant phase bias being further amplified at the logical level, we identify noisy error correction circuits as a key limiting factor in the circuits studied on the magnitude of this logical noise bias. Our approach provides a framework for assessing the detailed noise characteristics, as well as the overall performance, of fault-tolerant logical primitives.

quant-ph↗

arXiv2023

Learning correlated noise in a 39-qubit quantum processor

Building error-corrected quantum computers relies crucially on measuring and modeling noise on candidate devices. In particular, optimal error correction requires knowing the noise that occurs in the device as it executes the circuits required for error correction. As devices increase in size we will become more reliant on efficient models of this noise. However, such models must still retain the information required to optimize the algorithms used for error correction. Here we propose a method of extracting detailed information of the noise in a device running syndrome extraction circuits. We introduce and execute an experiment on a superconducting device using 39 of its qubits in a surface code doing repeated rounds of syndrome extraction, but omitting the mid-circuit measurement and reset. We show how to extract from the 20 data qubits the information needed to build noise models of various sophistication in the form of graphical models. These models give efficient descriptions of noise in large-scale devices and are designed to illuminate the effectiveness of error correction against correlated noise. Our estimates are furthermore precise: we learn a consistent global distribution where all one- and two-qubit error rates are known to a relative error of 0.1%. By extrapolating our experimentally learned noise models towards lower error rates, we demonstrate that accurate correlated noise models are increasingly important for successfully predicting sub-threshold behavior in quantum error correction experiments.

quant-ph↗

arXiv2020

Fast Estimation of Sparse Quantum Noise

As quantum computers approach the fault tolerance threshold, diagnosing and characterizing the noise on large scale quantum devices is increasingly important. One of the most important classes of noise channels is the class of Pauli channels, for reasons of both theoretical tractability and experimental relevance. Here we present a practical algorithm for estimating the $s$ nonzero Pauli error rates in an $s$-sparse, $n$-qubit Pauli noise channel, or more generally the $s$ largest Pauli error rates. The algorithm comes with rigorous recovery guarantees and uses only $O(n^2)$ measurements, $O(s n^2)$ classical processing time, and Clifford quantum circuits. We experimentally validate a heuristic version of the algorithm that uses simplified Clifford circuits on data from an IBM 14-qubit superconducting device and our open source implementation. These data show that accurate and precise estimation of the probability of arbitrary-weight Pauli errors is possible even when the signal is two orders of magnitude below the measurement noise floor.

quant-ph↗

arXiv2019

Scalable Bayesian Hamiltonian learning

As the size of quantum devices continues to grow, the development of scalable methods to characterise and diagnose noise is becoming an increasingly important problem. Recent methods have shown how to efficiently estimate Hamiltonians in principle, but they are poorly conditioned and can only characterize the system up to a scalar factor, making them difficult to use in practice. In this work we present a Bayesian methodology, called Bayesian Hamiltonian Learning (BHL), that addresses both of these issues by making use of any or all, of the following: well-characterised experimental control of Hamiltonian couplings, the preparation of multiple states, and the availability of any prior information for the Hamiltonian. Importantly, BHL can be used online as an adaptive measurement protocol, updating estimates and their corresponding uncertainties as experimental data become available. In addition, we show that multiple input states and control fields enable BHL to reconstruct Hamiltonians that are neither generic nor spatially local. We demonstrate the scalability and accuracy of our method with numerical simulations on up to 100 qubits. These practical results are complemented by several theoretical contributions. We prove that a $k$-body Hamiltonian $H$ whose correlation matrix has a spectral gap $\Delta$ can be estimated to precision $\varepsilon$ with only $\tilde{O}\bigl(n^{3k}/(\varepsilon \Delta)^{3/2}\bigr)$ measurements. We use two subroutines that may be of independent interest: First, an algorithm to approximate a steady state of $H$ starting from an arbitrary input that converges factorially in the number of samples; and second, an algorithm to estimate the expectation values of $m$ Pauli operators with weight $\le k$ to precision $\epsilon$ using only $O(\epsilon^{-2} 3^k \log m)$ measurements, which quadratically improves a recent result by Cotler and Wilczek.

quant-ph↗

arXiv2019

Efficient learning of quantum noise

Noise is the central obstacle to building large-scale quantum computers. Quantum systems with sufficiently uncorrelated and weak noise could be used to solve computational problems that are intractable with current digital computers. There has been substantial progress towards engineering such systems. However, continued progress depends on the ability to characterize quantum noise reliably and efficiently with high precision. Here we describe such a protocol and report its experimental implementation on a 14-qubit superconducting quantum architecture. The method returns an estimate of the effective noise and can detect correlations within arbitrary sets of qubits. We show how to construct a quantum noise correlation matrix allowing the easy visualization of correlations between all pairs of qubits, enabling the discovery of long-range two-qubit correlations in the 14 qubit device that had not previously been detected. Our results are the first implementation of a provably rigorous and comprehensive diagnostic protocol capable of being run on state of the art devices and beyond. These results pave the way for noise metrology in next-generation quantum devices, calibration in the presence of crosstalk, bespoke quantum error-correcting codes, and customized fault-tolerance protocols that can greatly reduce the overhead in a quantum computation.

quant-ph↗

arXiv2019

Statistical analysis of randomized benchmarking

Randomized benchmarking and variants thereof, which we collectively call RB+, are widely used to characterize the performance of quantum computers because they are simple, scalable, and robust to state-preparation and measurement errors. However, experimental implementations of RB+ allocate resources suboptimally and make ad-hoc assumptions that undermine the reliability of the data analysis. In this paper, we propose a simple modification of RB+ which rigorously eliminates a nuisance parameter and simplifies the experimental design. We then show that, with this modification and specific experimental choices, RB+ efficiently provides estimates of error rates with multiplicative precision. Finally, we provide a simplified rigorous method for obtaining credible regions for parameters of interest and a heuristic approximation for these intervals that performs well in currently relevant regimes.

quant-ph↗

arXiv2018

Fault-Tolerant Logical Gates in the IBM Quantum Experience

Quantum computers will require encoding of quantum information to protect them from noise. Fault-tolerant quantum computing architectures illustrate how this might be done but have not yet shown a conclusive practical advantage. Here we demonstrate that a small but useful error detecting code improves the fidelity of the fault-tolerant gates implemented in the code space as compared to the fidelity of physically equivalent gates implemented on physical qubits. By running a randomized benchmarking protocol in the logical code space of the [4,2,2] code, we observe an order of magnitude improvement in the infidelity of the gates, with the two-qubit infidelity dropping from 5.8(2)% to 0.60(3)%. Our results are consistent with fault-tolerance theory and conclusively demonstrate the benefit of carrying out computation in a code space that can detect errors. Although the fault-tolerant gates offer an impressive improvement in fidelity, the computation as a whole is not below the fault-tolerance threshold because of noise associated with state preparation and measurement on this device.

quant-ph↗

arXiv2016

Explaining quantum correlations through evolution of causal models

We propose a framework for the systematic and quantitative generalization of Bell's theorem using causal networks. We first consider the multi-objective optimization problem of matching observed data while minimizing the causal effect of nonlocal variables and prove an inequality for the optimal region that both strengthens and generalizes Bell's theorem. To solve the optimization problem (rather than simply bound it), we develop a novel genetic algorithm treating as individuals causal networks. By applying our algorithm to a photonic Bell experiment, we demonstrate the trade-off between the quantitative relaxation of one or more local causality assumptions and the ability of data to match quantum correlations.

quant-ph↗

arXiv2016

Estimating the fidelity of T gates using standard interleaved randomized benchmarking

Randomized benchmarking (RB) is an important protocol for robustly characterizing the error rates of quantum gates. The technique is typically applied to the Clifford gates since they form a group that satisfies a convenient technical condition of forming a unitary 2-design, in addition to having a tight connection to fault-tolerant quantum computing and an efficient classical simulation. In order to achieve universal quantum computing one must add at least one additional gate such as the T gate (also known as the $\pi$/8 gate). Here we propose and analyze a simple variation of the standard interleaved RB protocol that can accurately estimate the average fidelity of the T gate while retaining the many advantages of a unitary 2-design and the fidelity guarantees that such a design delivers, as well as the efficient classical simulation property of the Clifford group. Our work complements prior methods that have succeeded in estimating T gate fidelities, but only by relaxing the 2-design constraint and using a more complicated data analysis.

quant-ph↗

arXiv2015

Error Compensation of Single-Qubit Gates in a Surface Electrode Ion Trap Using Composite Pulses

The fidelity of laser-driven quantum logic operations on trapped ion qubits tend to be lower than microwave-driven logic operations due to the difficulty of stabilizing the driving fields at the ion location. Through stabilization of the driving optical fields and use of composite pulse sequences, we demonstrate high fidelity single-qubit gates for the hyperfine qubit of a $^{171}\text{Yb}^+$ ion trapped in a microfabricated surface electrode ion trap. Gate error is characterized using a randomized benchmarking protocol, and an average error per randomized Clifford group gate of $3.6(3)\times10^{-4}$ is measured. We also report experimental realization of palindromic pulse sequences that scale efficiently in sequence length.

quant-ph↗

arXiv2015

Estimating the Coherence of Noise

Noise mechanisms in quantum systems can be broadly characterized as either coherent (i.e., unitary) or incoherent. For a given fixed average error rate, coherent noise mechanisms will generally lead to a larger worst-case error than incoherent noise. We show that the coherence of a noise source can be quantified by the unitarity, which we relate to the average change in purity averaged over input pure states. We then show that the unitarity can be efficiently estimated using a protocol based on randomized benchmarking that is efficient and robust to state-preparation and measurement errors. We also show that the unitarity provides a lower bound on the optimal achievable gate infidelity under a given noisy process.

quant-ph↗