arXiv subjects

Rodolfo Feick

Publications and source records attributed to Rodolfo Feick.

9 recordsLinked to original sources

arXiv2026

Statistical Model of Time-varying Backscatter Power of Monostatic RF Sensing Channels in Urban Canyons

We present a measurement-based statistical model for the backscatter power ratio of monostatic RF sensing in urban canyons with moving clutter, suitable for large-scale system level performance evaluation of RF sensing in 6G networks. A narrowband (CW) 140 GHz sounder used a monostatic radar arrangement with an omnidirectional transmit antenna illuminating streets and a spinning horn 2o receive antenna offset vertically (less than 1 m away) collecting backscattered power as a function of azimuth and time below building height in Manhattan and Valparaiso, Chile. A concise outdoor deterministic model of average backscattered power dependent on distance to nearest building-wall reproduces observations with 3.3 dB RMS error or better. Distribution of power variation in azimuth around this average is reproduced within 0.5 dB by a random azimuth spectrum with a lognormal distribution. Temporal fluctuations for various antenna aims and locations were found to be well modeled by a Rician distribution, with lognormally distributed K-factor, with 0.47-0.73 correlation coefficient to backscatter power deviation from mean. The statistical model does not require a detailed environmental description, aiming to reproduce backscatter clutter statistics (as opposed to a deterministic response) faithfully and efficiently, essential for large-scale system-level performance evaluation.

eess.SP↗

arXiv2025

Channel and Spectrum Consumption Models for Urban Outdoor-to-Outdoor 28 GHz Wireless

Millimeter-wave (mmWave) communication has been widely accepted as an enabler of 6G and other next-generation wireless networks, though high path loss strains link budgets, and difficult channel conditions have limited the deployment of mmWave within the 5G NR radio access network (RAN) primarily to dense urban environments. In this paper, we seek to demystify aspects of RAN planning and design for these environments by providing a set of empirical models of the mmWave channel at 28 GHz, alongside a methodology to develop spectrum consumption models (SCMs), which illustrate constraints on spectrum allocation by the RAN. We report on an extensive 28 GHz measurement campaign within the PAWR COSMOS testbed in New York City. This campaign resulted in over 46 million power measurements, collected from over 3,000 links across 24 street sidewalks at four different sites. Using these measurements, we study the effects of the setup and environments, such as TX height and seasonal effects. We then derive a series of channel models for path loss and the azimuth beamforming gain loss, and use them to derive distributions of the link SNR values achievable by UEs on the measured sidewalks. We show, among other results, that 100% of UEs on a given city block can achieve 10 dB SNR at locations with a strong street canyon effect. Finally, we develop a process to generate SCMs based on the IEEE 1900.5.2 standard using the empirical channel models. The generated SCMs facilitate the evaluation of spectrum sharing and interference management scenarios since they capture all directional propagation effects reflected in the measurements and provide a way to easily share the main propagation characterization results derived from the measurements. We believe that the models, methods, and results in this paper will help inform the future of mmWave wireless network deployments within dense urban areas.

eess.SP↗

arXiv2024

Backscatter Measurements and Models for RF Sensing Applications in Cluttered Environments

A statistical backscatter channel model for indoor clutter is developed for indoor RF sensing applications based on measurements. A narrowband 28 GHz sounder used a quazi-monostatic radar arrangement with an omnidirectional transmit antenna illuminating an indoor scene and a spinning horn receive antenna less than 1 m away collecting backscattered power as a function of azimuth. Median average backscatter power was found to vary over a 12 dB range, with average power generally decreasing with increasing room size. A deterministic model of average backscattered power dependent on distance to nearest wall and wall reflection coefficient reproduces observations with 4.0 dB RMS error. Distribution of power variation in azimuth around this average is reproduced within 1 dB by a random azimuth spectrum with a lognormal amplitude distribution and uniformly random phase. The model is extended to provide power distribution over both azimuth and delay (conveying range to scatterer) by combining azimuthal distribution with published results on power delay profiles in reverberant environments. The statistical model does not require a detailed room layout description, aiming to reproduce backscatter clutter statistics, as opposed to a deterministic response.

eess.SY↗

arXiv2023

Measured and Modeled Outdoor Indoor Coverage at 28 GHz into High Thermal Efficiency Buildings

28 GHz outdoor-indoor coverage into modern office buildings with high thermal efficiency windows is found to be severely limited due to 46 dB median penetration loss at normal incidence and additional 15 dB median oblique incidence loss. The study is based on measurements of path gain over 280 outdoor-indoor links, at ranges up to 100 m. A simple theoretical path gain model is extended to include building penetration through multiple sides of the building as well as a reflection from another building. The theoretical model accounts for the building orientation relative to the source, resulting in 4.9 dB RMSE relative to data, as compared to 5.7 dB RMSE from a linear fit and 14.7 dB RMSE for the 3GPP recommended model. Only coarse description of the buildings is required: building orientation and exterior wall composition, without any interior details. Coverage range for SNR>-8 dB from an outdoor base to a terminal just inside a high-efficiency building is under 35 m

cs.NI↗

arXiv2022

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

eess.SP↗

arXiv2019

Directional Measurements in Urban Street Canyons from Macro Rooftop Sites at 28 GHz for 90% Outdoor Coverage

Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying over 30 dB at similar distances. Coverage in the street directly illuminated by a roof edge antenna is found to suffer an average excess loss of 11 dB relative to free space at 200 m, with empirical slope-intercept fit model representing the data with 7.1 dB standard deviation. Offsetting the base antenna 5 m away from roof edge, as is common in macro cellular deployments, introduces an additional average loss of 15 dB at 100 m, but this additional loss reduces with distance. Around the corner loss is well modeled by a diffraction formula with an empirically obtained diffraction coefficient. Effective azimuthal gain degradation due to scatter is limited to 2 dB for 90% of data, supporting effective use of high gain antennas in urban street canyons.

eess.SP↗

arXiv2018

Suburban Fixed Wireless Access Channel Measurements and Models at 28 GHz for 90% Outdoor Coverage

Achieving adequate coverage with high gain antennas is key to realizing the full promise of the wide bandwidth available at cm/mm bands. We report extensive outdoor measurements at 28 GHz in suburban residential areas in New Jersey and Chile, with over 2000 links measured for same-street link types (vegetation blocked LOS) from 13 streets and other-street link types (true NLOS) from 7 streets, using a specialized narrowband channel sounder at ranges reaching 200 m. The measurements, applicable to fixed wireless access, involved a 55$^\circ$ transmit antenna placed on the exterior of a street-facing window and a 10$^\circ$ receive horn antenna spinning on top of a van mast at 3 m height, emulating a lamppost-mounted base station. Measured path gain-distance dependence is well represented by power-law models, and azimuth gains at the base are degraded through scattering by more than 4.3 dB for 10% of links. It was found that, with 51 dBm EIRP at the base station and 11 dBi antenna at an outdoor mounted terminal, 1 Gbps downlink rate can be delivered up to 100 m from a base station deployed in the same street with 90% coverage guarantee.

cs.IT↗

arXiv2018

Suburban Residential Building Penetration Loss at 28 GHz for Fixed Wireless Access

Fixed wireless access at mm/cm bands has been proposed for high-speed broadband access to suburban residential customers and building penetration loss is a key parameter. We report a measurement campaign at 28 GHz in a New Jersey suburban residential neighborhood for three representative single-family homes. A base antenna is mounted at 3-meter height, emulating a base station on a lamppost, moves down the street up to 200 meters. A customer premises equipment (CPE) device, acting as relay to provide indoor coverage throughout the desired area, is mounted either on the exterior of a street-facing window or 1.5 meters behind the window. The median indoor-outdoor path gain difference, corresponding to the extra loss by moving the window-mounted CPE indoor, is found to be 9 dB for the house with low-loss materials and plain-glass windows, and 17 dB for the house with low-emissivity windows and foil-backed insulation. These losses are in addition to other losses (e.g., vegetation blockage) in comparison to free space propagation.

cs.IT↗

arXiv2017

Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors

Adequate coverage with high gain antennas is key to realizing the full promise of the bandwidth available at mm/cm wave bands. We report extensive indoor measurements at 28 GHz (1000 links, 9.9 million individual power measurements, 10 offices, 2 buildings), with/without line-of-sight (LOS) using a continuous wave channel sounder, with a 10o spinning horn, capable of capturing a full azimuth scan every 200 ms, in up to 171 dB path loss to characterize coverage with 90% confidence level. The environment had prominent corridors and rooms, as opposed to open/mixed offices in latest 3GPP standards. Guiding in corridors leads to much lower RMS azimuth spread (7 degree median in corridor non-LOS vs. 42 degree in 3GPP) and higher penetration loss into rooms and around corners (30-32 dB, some 12 dB more loss than 3GPP at 20 m non-LOS). Measured path gain in non-LOS is predicted by a mode-diffusion model with 3.9 dB RMS error. Scattering degraded azimuth gain by up to 4 dB in the corridor and 7 dB in rooms with 90% probability. Link simulations in a canonical building indicate every corridor needs an access point to provide 1 Gbps rate to adjoining rooms within 50 m using 400 MHz of bandwidth.

cs.IT↗