arXiv subjects

Samuel Gyger

Publications and source records attributed to Samuel Gyger.

At least 19 recordsLinked to original sources

arXiv2026

A two-dimensional piezo-optomechanical transducer

Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.

quant-ph↗

arXiv2026

Zero-phonon line emission of single photon emitters in helium-ion treated MoS$_2$

We explore the zero-phonon line of single photon emitters in helium-ion treated monolayer MoS$_2$, which are currently understood in terms of single sulfur-site vacancies. By comparing the linewidths of the zero-phonon line as extracted directly from optical spectra with values inferred from the first-order autocorrelation function of the photoluminescence, we quantify bounds of the homogeneous broadening and of phonon-assisted contributions. The results are discussed in terms of both the independent boson model and ab-initio results as computed from GW and Bethe-Salpeter equation approximations.

cond-mat.mes-hall↗

arXiv2025

Robotic chip-scale nanofabrication for superior consistency

Unlike the rigid, high-volume automation found in industry, academic research requires process flexibility that has historically relied on variable manual operations. This hinders the fabrication of advanced, complex devices. We propose to address this gap by automating these low-volume, high-stakes tasks using a robotic arm to improve process control and consistency. As a proof of concept, we deploy this system for the resist development of Josephson junction devices. A statistical comparison of the process repeatability shows the robotic process achieves a resistance spread across chips close to 2%, a significant improvement over the ~7% spread observed from human operators, validating robotics as a solution to eliminate operator-dependent variability and a path towards industrial-level consistency in a research setting.

physics.app-ph↗

arXiv2025

Entanglement-verified time distribution in a metropolitan network

The precise synchronization of distant clocks is a fundamental requirement for a wide range of applications. Here, we experimentally demonstrate a novel approach of quantum clock synchronization utilizing entangled and correlated photon pairs generated by a quantum dot at telecom wavelength. By distributing these entangled photons through a metropolitan fiber network in the Stockholm area and measuring the remote correlations, we achieve a synchronization accuracy of tens of picoseconds by leveraging the tight time correlation between the entangled photons. We show that our synchronization scheme is secure against spoofing attacks by performing a remote quantum state tomography to verify the origin of the entangled photons. We measured a distributed maximum entanglement fidelity of $0.817 \pm 0.040$ to the $|\Phi^+\rangle$ Bell state and a concurrence of $0.660 \pm 0.086$. These results highlight the potential of quantum dot-generated entangled pairs as a shared resource for secure time synchronization and quantum key distribution in real-world quantum networks.

quant-ph↗

arXiv2024

Single-photon detectors on arbitrary photonic substrates

Detecting non-classical light is a central requirement for photonics-based quantum technologies. Unrivaled high efficiencies and low dark counts have positioned superconducting nanowire single photon detectors (SNSPDs) as the leading detector technology for fiber and integrated photonic applications. However, a central challenge lies in their integration within photonic integrated circuits regardless of material platform or surface topography. Here, we introduce a method based on transfer printing that overcomes these constraints and allows for the integration of SNSPDs onto arbitrary photonic substrates. We prove this by integrating SNSPDs and showing through-waveguide single-photon detection in commercially manufactured silicon and lithium niobate on insulator integrated photonic circuits. Our method eliminates bottlenecks to the integration of high-quality single-photon detectors, turning them into a versatile and accessible building block for scalable quantum information processing.

quant-ph↗

arXiv2024

A two-dimensional optomechanical crystal for quantum transduction

Integrated optomechanical systems are one of the leading platforms for manipulating, sensing, and distributing quantum information. The temperature increase due to residual optical absorption sets the ultimate limit on performance for these applications. In this work, we demonstrate a two-dimensional optomechanical crystal geometry, named \textbf{b-dagger}, that alleviates this problem through increased thermal anchoring to the surrounding material. Our mechanical mode operates at 7.4 GHz, well within the operation range of standard cryogenic microwave hardware and piezoelectric transducers. The enhanced thermalization combined with the large optomechanical coupling rates, $g_0/2\pi \approx 880~\mathrm{kHz}$, and high optical quality factors, $Q_\text{opt} = 2.4 \times 10^5$, enables the ground-state cooling of the acoustic mode to phononic occupancies as low as $n_\text{m} = 0.35$ from an initial temperature of 3 kelvin, as well as entering the optomechanical strong-coupling regime. Finally, we perform pulsed sideband asymmetry of our devices at a temperature below 10 millikelvin and demonstrate ground-state operation ($n_\text{m} < 0.45$) for repetition rates as high as 3 MHz. Our results extend the boundaries of optomechanical system capabilities and establish a robust foundation for the next generation of microwave-to-optical transducers with entanglement rates overcoming the decoherence rates of state-of-the-art superconducting qubits.

quant-ph↗

arXiv2023

Single-Mode Squeezed Light Generation and Tomography with an Integrated Optical Parametric Oscillator

Quantum optical technologies promise advances in sensing, computing, and communication. A key resource is squeezed light, where quantum noise is redistributed between optical quadratures. We introduce a monolithic, chip-scale platform that exploits the $\chi^{(2)}$ nonlinearity of a thin-film lithium niobate (TFLN) resonator device to efficiently generate squeezed states of light. Our system integrates all essential components -- except for the laser and two detectors -- on a single chip with an area of one square centimeter, significantly reducing the size, operational complexity, and power consumption associated with conventional setups. Our work addresses challenges that have limited previous integrated nonlinear photonic implementations that rely on either $\chi^{(3)}$ nonlinear resonators or on integrated waveguide $\chi^{(2)}$ parametric amplifiers. Using the balanced homodyne measurement subsystem that we implemented on the same chip, we measure a squeezing of 0.55 dB and an anti-squeezing of 1.55 dB. We use 20 mW of input power to generate the parametric oscillator pump field by employing second harmonic generation on the same chip. Our work represents a substantial step toward compact and efficient quantum optical systems posed to leverage the rapid advances in integrated nonlinear and quantum photonics.

quant-ph↗

arXiv2023

Cavity-enhanced single artificial atoms in silicon

Artificial atoms in solids are leading candidates for quantum networks, scalable quantum computing, and sensing, as they combine long-lived spins with mobile and robust photonic qubits. The central requirements for the spin-photon interface at the heart of these systems are long spin coherence times and efficient spin-photon coupling at telecommunication wavelengths. Artificial atoms in silicon have a unique potential to combine the long coherence times of spins in silicon with telecommunication wavelength photons in the world's most advanced microelectronics and photonics platform. However, a current bottleneck is the naturally weak emission rate of artificial atoms. An open challenge is to enhance this interaction via coupling to an optical cavity. Here, we demonstrate cavity-enhanced single artificial atoms at telecommunication wavelengths in silicon. We optimize photonic crystal cavities via inverse design and show controllable cavity-coupling of single G-centers in the telecommunications O-band. Our results illustrate the potential to achieve a deterministic spin-photon interface in silicon at telecommunication wavelengths, paving the way for scalable quantum information processing.

quant-ph↗

arXiv2022

2022 Roadmap for Materials for Quantum Technologies

Quantum technologies are poised to move the foundational principles of quantum physics to the forefront of applications. This roadmap identifies some of the key challenges and provides insights on materials innovations underlying a range of exciting quantum technology frontiers. Over the past decades, hardware platforms enabling different quantum technologies have reached varying levels of maturity. This has allowed for first proof-of-principle demonstrations of quantum supremacy, for example quantum computers surpassing their classical counterparts, quantum communication with reliable security guaranteed by laws of quantum mechanics, and quantum sensors uniting the advantages of high sensitivity, high spatial resolution, and small footprints. In all cases, however, advancing these technologies to the next level of applications in relevant environments requires further development and innovations in the underlying materials. From a wealth of hardware platforms, we select representative and promising material systems in currently investigated quantum technologies. These include both the inherent quantum bit systems as well as materials playing supportive or enabling roles, and cover trapped ions, neutral atom arrays, rare earth ion systems, donors in silicon, color centers and defects in wide-band gap materials, two-dimensional materials and superconducting materials for single-photon detectors. Advancing these materials frontiers will require innovations from a diverse community of scientific expertise, and hence this roadmap will be of interest to a broad spectrum of disciplines.

quant-ph↗

arXiv2021

Current crowding in nanoscale superconductors within the Ginzburg-Landau model

The current density in a superconductor with turnarounds or constrictions is non-uniform due to a geometrical current crowding effect. This effect reduces the critical current in the superconducting structure compared to a straight segment and is of importance when designing superconducting devices. We investigate the current crowding effect in numerical simulations within the generalized time-dependent Ginzburg-Landau (GTDGL) model. The results are validated experimentally by measuring the magnetic field dependence of the critical current in superconducting nanowire structures, similar to those employed in single-photon detector devices. Comparing the results with London theory, we conclude that the reduction in critical current is significantly smaller in the GTDGL model. This difference is attributed to the current redistribution effect, which reduces the current density in weak points of the superconductor and counteracts the current crowding effect. We numerically investigate the effect of fill factor on the critical current in a meander and conclude that the reduction of critical current is low enough to justify fill factors higher than $33\,\%$ for applications where detection efficiency is critical. Finally, we propose a novel meander design which can combine high fill factor and low current crowding.

cond-mat.supr-con↗

arXiv2021

Efficient and Versatile Toolbox for Analysis of Time-Tagged Measurements

Acquisition and analysis of time-tagged events is a ubiquitous tool in scientific and industrial applications. With increasing time resolution, number of input channels, and acquired events, the amount of data can be overwhelming for standard processing techniques. We developed the Extensible Time-tag Analyzer (ETA), a powerful and versatile, yet easy to use software to efficiently analyze and display time-tagged data. Our tool allows for flexible extraction of correlation from time-tagged data beyond start-stop measurements that were traditionally used. A combination of state diagrams and simple code snippets allows for analysis of arbitrary complexity while keeping computational efficiency high.

physics.ins-det↗

arXiv2021

Giant Rydberg excitons in Cu$_{2}$O probed by photoluminescence excitation spectroscopy

Rydberg excitons are, with their ultrastrong mutual interactions, giant optical nonlinearities, and very high sensitivity to external fields, promising for applications in quantum sensing and nonlinear optics at the single-photon level. To design quantum applications it is necessary to know how Rydberg excitons and other excited states relax to lower-lying exciton states. Here, we present photoluminescence excitation spectroscopy as a method to probe transition probabilities from various excitonic states in cuprous oxide, and we show giant Rydberg excitons at $T=38$ mK with principal quantum numbers up to $n=30$, corresponding to a calculated diameter of 3 $\mu$m.

cond-mat.mes-hall↗

arXiv2020

Fractal superconducting nanowires detect infrared single photons with 84% system detection efficiency, 1.02 polarization sensitivity, and 20.8 ps timing resolution

The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental for photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84$\pm$3$\%$ SDE, 1.02$^{+0.06}_{-0.02}$ polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1-W closed-cycle Gifford-McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution

quant-ph↗

arXiv2020

Temporal array with superconducting nanowire single-photon detectors for photon-number-resolution

We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time-bins, and the time-bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between $10^{-3}$ to $10^{2}$. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is $49\,\%$. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.

quant-ph↗

arXiv2020

Reconfigurable quantum photonics with on-chip detectors

Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits, allow feedback and adaptive control, crucial for deterministic quantum teleportation, training of neural networks, and stabilization of complex circuits. However, the heat generated by thermally reconfigurable photonics is incompatible with heat-sensitive superconducting single-photon detectors, and thus their on-chip co-integration remains elusive. Here we show low-power microelectromechanical reconfiguration of integrated photonic circuits interfaced with superconducting single-photon detectors on the same chip. We demonstrate three key functionalities for photonic quantum technologies: 28 dB high-extinction routing of classical and quantum light, 90 dB high-dynamic range single-photon detection, and stabilization of optical excitation over 12 dB power variation. Our platform enables heat-load free reconfigurable linear optics and adaptive control, critical for quantum state preparation and quantum logic in large-scale quantum photonics applications.

physics.app-ph↗

arXiv2020

Scalable single-photon sources in atomically thin MoS2

Real-world quantum applications, eg. on-chip quantum networks and quantum cryptography, necessitate large scale integrated single-photon sources with nanoscale footprint for modern information technology. While on-demand and high fidelity implantation of atomic scale single-photon sources in conventional 3D materials suffer from uncertainties due to the crystals dimensionality, layered 2D materials can host point-like centers with inherent confinement to a sub-nm plane. However, previous attempts to truly deterministically control spatial position and spectral homogeneity while maintaining the 2D character have not been realized. Here, we demonstrate the on-demand creation and precise positioning of single-photon sources in atomically thin MoS2 with very narrow ensemble broadening and near-unity fabrication yield. Focused ion beam irradiation creates 100s to 1000s of mono-typical atomistic defects with anti-bunched emission lines with sub-10 nm lateral and 0.7 nm axial positioning accuracy. Our results firmly establish 2D materials as a scalable platform for single-photon emitters with unprecedented control of position as well as photophysical properties owing to the all-interfacial nature.

cond-mat.mes-hall↗

arXiv2020

Resonance fluorescence from waveguide-coupled strain-localized two-dimensional quantum emitters

Efficient on-chip integration of single-photon emitters imposes a major bottleneck for applications of photonic integrated circuits in quantum technologies. Resonantly excited solid-state emitters are emerging as near-optimal quantum light sources, if not for the lack of scalability of current devices. Current integration approaches rely on cost-inefficient individual emitter placement in photonic integrated circuits, rendering applications impossible. A promising scalable platform is based on two-dimensional (2D) semiconductors. However, resonant excitation and single-photon emission of waveguide-coupled 2D emitters have proven to be elusive. Here, we show a scalable approach using a silicon nitride photonic waveguide to simultaneously strain-localize single-photon emitters from a tungsten diselenide (WSe2) monolayer and to couple them into a waveguide mode. We demonstrate the guiding of single photons in the photonic circuit by measuring second-order autocorrelation of g$^{(2)}(0)=0.150\pm0.093$ and perform on-chip resonant excitation yielding a g$^{(2)}(0)=0.377\pm0.081$. Our results are an important step to enable coherent control of quantum states and multiplexing of high-quality single photons in a scalable photonic quantum circuit.

physics.app-ph↗

arXiv2019

On-demand generation of entangled photon pairs in the telecom C-band for fiber-based quantum networks

On-demand sources of entangled photons for the transmission of quantum information in the telecom C-band are required to realize fiber-based quantum networks. So far, non-deterministic sources of quantum states of light were used for long distance entanglement distribution in this lowest loss wavelength range. However, they are fundamentally limited in either efficiency or security due to their Poissonian emission statistics. Here, we show on-demand generation of entangled photon pairs in the telecom C-band by an InAs/GaAs semiconductor quantum dot. Using a robust phonon-assisted excitation scheme we measure a concurrence of $91.4\,\%$ and a fidelity of $95.2\,\%$ to $\Phi^+$. On-demand generation of polarization entangled photons will enable secure quantum communication in fiber-based networks. Furthermore, applying this excitation scheme to several remote quantum dots tuned into resonance will enable first on-demand entanglement distribution over large distances for scalable real-life quantum applications.

cond-mat.mes-hall↗