Search arXiv⌕ Search

arXiv subjects

Shuo Zhang

Publications and source records attributed to Shuo Zhang.

At least 217 records · Page 12Linked to original sources
arXiv2023

Precise determination of $^{210}$Pb $β$ Decay Spectrum at 0 keV and its Implication to Theoretical Calculations

The atomic exchange effect will lead to a significant increase in the probability density of $β$ decays below a few keV. This effect is very important for scientific experiments that performed by low-energy electron spectroscopy measurements. However, the atomic exchange effect involves multi-electron interactions, especially for a system with 82 electrons such as lead. Different parameters will lead to different trends in the energy spectrum predicted by the theory, so it is urgent to carry out experimental measurements to provide parameter limits for the theory. The probability increase brought about by the atomic exchange effect is most obvious near 0keV, and the $β$ energy spectrum is accurately measured near this energy point, so as to provide constraints for the physical model of atomic exchange. However, it is extremely difficult to measure the $β$ energy spectrum at 0keV due to the limitations of electronic noise and internal conversion effects. The excited decay path of $^{210}$Pb was taken as the observation object,by measuring the total energy spectrum of $β$ rays and cascaded gamma rays, the precise measurement of the $β$ energy spectrum near 0keV has been completed. The analysis of the $β$ energy spectrum of $^{210}$Pb gives the following conclusions. The experimental results first verified the theory that the exchange effect causes the probability increase at the low energy end near 0keV. At the same time, the experimental results are higher than the existing predictions of the atomic exchange effect. At least for Pb element, all the electron shells have played a role in improving the probability density of the low end of the $β$ energy spectrum. This discovery will promote the theoretical calculation of the $β$ energy spectrum of $^{214}$Pb, at the same time, it also indicates that the reactor neutrinos have a higher probability density at the omnipotent end.

nucl-ex↗
arXiv2023

Physics-aware Graph Neural Network for Accurate RNA 3D Structure Prediction

Biological functions of RNAs are determined by their three-dimensional (3D) structures. Thus, given the limited number of experimentally determined RNA structures, the prediction of RNA structures will facilitate elucidating RNA functions and RNA-targeted drug discovery, but remains a challenging task. In this work, we propose a Graph Neural Network (GNN)-based scoring function trained only with the atomic types and coordinates on limited solved RNA 3D structures for distinguishing accurate structural models. The proposed Physics-aware Multiplex Graph Neural Network (PaxNet) separately models the local and non-local interactions inspired by molecular mechanics. Furthermore, PaxNet contains an attention-based fusion module that learns the individual contribution of each interaction type for the final prediction. We rigorously evaluate the performance of PaxNet on two benchmarks and compare it with several state-of-the-art baselines. The results show that PaxNet significantly outperforms all the baselines overall, and demonstrate the potential of PaxNet for improving the 3D structure modeling of RNA and other macromolecules. Our code is available at https://github.com/zetayue/Physics-aware-Multiplex-GNN.

cs.LG↗
arXiv2023

Learning Universal and Robust 3D Molecular Representations with Graph Convolutional Networks

To learn accurate representations of molecules, it is essential to consider both chemical and geometric features. To encode geometric information, many descriptors have been proposed in constrained circumstances for specific types of molecules and do not have the properties to be ``robust": 1. Invariant to rotations and translations; 2. Injective when embedding molecular structures. In this work, we propose a universal and robust Directional Node Pair (DNP) descriptor based on the graph representations of 3D molecules. Our DNP descriptor is robust compared to previous ones and can be applied to multiple molecular types. To combine the DNP descriptor and chemical features in molecules, we construct the Robust Molecular Graph Convolutional Network (RoM-GCN) which is capable to take both node and edge features into consideration when generating molecule representations. We evaluate our model on protein and small molecule datasets. Our results validate the superiority of the DNP descriptor in incorporating 3D geometric information of molecules. RoM-GCN outperforms all compared baselines.

cs.LG↗
arXiv2023

InfoSync: Information Synchronization across Multilingual Semi-structured Tables

Information Synchronization of semi-structured data across languages is challenging. For instance, Wikipedia tables in one language should be synchronized across languages. To address this problem, we introduce a new dataset InfoSyncC and a two-step method for tabular synchronization. InfoSync contains 100K entity-centric tables (Wikipedia Infoboxes) across 14 languages, of which a subset (3.5K pairs) are manually annotated. The proposed method includes 1) Information Alignment to map rows and 2) Information Update for updating missing/outdated information for aligned tables across multilingual tables. When evaluated on InfoSync, information alignment achieves an F1 score of 87.91 (en <-> non-en). To evaluate information updation, we perform human-assisted Wikipedia edits on Infoboxes for 603 table pairs. Our approach obtains an acceptance rate of 77.28% on Wikipedia, showing the effectiveness of the proposed method.

cs.CL↗
arXiv2023

Insight-HXMT Measurements of the Diffuse X-ray Background

We present an X-ray spectrum of the diffuse X-ray background (DXRB) between 1.5 and 120 keV, as measured with the Low-Energy Detector (LE) and the High-Energy Detector (HE) aboard the Insight-HXMT satellite, based on 'blank-sky' observations. LE covers a nominal energy range of 1-15 keV and HE 20-250 keV, but calibration issues and data quality narrowed the energy range for this work. The LE background was directly measured with `blind' detector modules, while the HE background was derived from Earth-occultation data. With the LE data alone, the measured DXRB spectrum can be well described by a power law; fitting the LE and HE data jointly, however, a spectral cut-off must be introduced in the model to account for the measurements above 30 keV. Modelling the combined spectrum with a cut-off power law, the best-fit photon index is 1.40, normalisation $9.57$~$\rm ph~cm^{-2}~s^{-1}~keV^{-1}~sr^{-1} $ (at 1 keV), and cut-off energy 55 keV, after correcting for the effects of the Earth albedo and atmospheric emission (which are significant in the HE band). Based on the best-fit cut-off power law, we derived the spectral energy distribution (SED) of the DXRB. The shape of the SED is in general agreement with the published measurements, but the overall normalization is lower by varying amounts, except for the HEAO-1 result, with which our result is in good agreement.

astro-ph.HE↗
arXiv2023

Towards Explainable Conversational Recommender Systems

Explanations in conventional recommender systems have demonstrated benefits in helping the user understand the rationality of the recommendations and improving the system's efficiency, transparency, and trustworthiness. In the conversational environment, multiple contextualized explanations need to be generated, which poses further challenges for explanations. To better measure explainability in conversational recommender systems (CRS), we propose ten evaluation perspectives based on concepts from conventional recommender systems together with the characteristics of CRS. We assess five existing CRS benchmark datasets using these metrics and observe the necessity of improving the explanation quality of CRS. To achieve this, we conduct manual and automatic approaches to extend these dialogues and construct a new CRS dataset, namely Explainable Recommendation Dialogues (E-ReDial). It includes 756 dialogues with over 2,000 high-quality rewritten explanations. We compare two baseline approaches to perform explanation generation based on E-ReDial. Experimental results suggest that models trained on E-ReDial can significantly improve explainability while introducing knowledge into the models can further improve the performance. GPT-3 in the in-context learning setting can generate more realistic and diverse movie descriptions. In contrast, T5 training on E-ReDial can better generate clear reasons for recommendations based on user preferences. E-ReDial is available at https://github.com/Superbooming/E-ReDial.

cs.IR↗
arXiv2023

Healing Unsafe Dialogue Responses with Weak Supervision Signals

Recent years have seen increasing concerns about the unsafe response generation of large-scale dialogue systems, where agents will learn offensive or biased behaviors from the real-world corpus. Some methods are proposed to address the above issue by detecting and replacing unsafe training examples in a pipeline style. Though effective, they suffer from a high annotation cost and adapt poorly to unseen scenarios as well as adversarial attacks. Besides, the neglect of providing safe responses (e.g. simply replacing with templates) will cause the information-missing problem of dialogues. To address these issues, we propose an unsupervised pseudo-label sampling method, TEMP, that can automatically assign potential safe responses. Specifically, our TEMP method groups responses into several clusters and samples multiple labels with an adaptively sharpened sampling strategy, inspired by the observation that unsafe samples in the clusters are usually few and distribute in the tail. Extensive experiments in chitchat and task-oriented dialogues show that our TEMP outperforms state-of-the-art models with weak supervision signals and obtains comparable results under unsupervised learning settings.

cs.CL↗
arXiv2023

STAR-RIS-UAV Aided Coordinated Multipoint Cellular System for Multi-user Networks

Different with conventional reconfigurable intelligent surface (RIS), simultaneous transmitting and reflecting RIS (STAR-RIS) can reflect and transmit the signals to the receiver. In this paper, to serve more ground users and increase the deployment flexibility, we investigate an unmanned aerial vehicle equipped with a STAR-RIS (STAR-RIS-UAV) aided wireless communications for multi-user networks. Energy splitting (ES) and mode switching (MS) protocols are considered to control the reflection and transmission coefficients of STAR-RIS elements. To maximize the sum rate of the STAR-RIS-UAV aided coordinated multipoint cellular system for multi-user networks, the corresponding beamforming vectors as well as transmitted and reflected coefficients matrices are optimized. Specifically, instead of adopting the alternating optimization, we design an iteration method to optimize all variables for both ES and MS protocols at the same time. Simulation results reveal that STAR-RIS-UAV aided wireless communication system has a much higher sum rate than the system with conventional RIS or without RIS. Furthermore, the proposed structure is more flexible than a fixed STAR-RIS and could greatly promote the sum rate.

cs.IT↗
arXiv2023

Stellar Parameters and Chemical Abundances Estimated from LAMOST-II DR8 MRS based on Cycle-StarNet

Deriving stellar atmospheric parameters and chemical abundances from stellar spectra is crucial for understanding the evolution of the Milky Way. By performing a fitting with MARCS model atmospheric theoretical synthetic spectra combined with a domain-adaptation method, we estimate the fundamental stellar parameters (Teff, log g, [Fe/H], vmic, and vmac) and 11 chemical abundances for 1.38 million FGKM-type stars of the Medium-Resolution Spectroscopic Survey (MRS) from LAMOST-II DR8. The domain-adaptation method, Cycle-StarNet, is employed to reduce the gap between observed and synthetic spectra, and the L-BFGS algorithm is used to search for the best-fit synthetic spectra. By combining the 2MASS photometric survey data, Gaia EDR3 parallax, and MIST isochrones, the surface gravities of the stars are constrained after estimating their bolometric luminosities. The accuracy of Teff, log g, and [Fe/H] can reach 150 K, 0.11 dex, and 0.15 dex, evaluated by the PASTEL catalog, asteroseismic samples, and other spectroscopic surveys. The precision of these parameters and elemental abundances ([C/Fe], [Na/Fe], [Mg/Fe], [Si/Fe], [Ca/Fe], [Ti/Fe], [Cr/Fe], [Mn/Fe], [Co/Fe], [Ni/Fe], and [Cu/Fe]) is assessed by repeated observations and validated by cluster members. For spectra with signal-to-noise (S/N) ratios greater than 10, the precision of the three stellar parameters and elemental abundances can achieve 76 K, 0.014 dex, 0.096 dex, and 0.04-0.15 dex. For spectra with S/N ratios higher than 100, the precision stabilizes at 22 K, 0.006 dex, 0.043 dex, and 0.01-0.06 dex. The full LAMOST MRS stellar properties catalog is available online.

astro-ph.SR↗
arXiv2023

Improved Deterministic Algorithms for Non-monotone Submodular Maximization

Submodular maximization is one of the central topics in combinatorial optimization. It has found numerous applications in the real world. In the past decades, a series of algorithms have been proposed for this problem. However, most of the state-of-the-art algorithms are randomized. There remain non-negligible gaps with respect to approximation ratios between deterministic and randomized algorithms in submodular maximization. In this paper, we propose deterministic algorithms with improved approximation ratios for non-monotone submodular maximization. Specifically, for the matroid constraint, we provide a deterministic $0.283-o(1)$ approximation algorithm, while the previous best deterministic algorithm only achieves a $1/4$ approximation ratio. For the knapsack constraint, we provide a deterministic $1/4$ approximation algorithm, while the previous best deterministic algorithm only achieves a $1/6$ approximation ratio. For the linear packing constraints with large widths, we provide a deterministic $1/6-ε$ approximation algorithm. To the best of our knowledge, there is currently no deterministic approximation algorithm for the constraints.

cs.DS↗
arXiv2023

V2V4Real: A Real-world Large-scale Dataset for Vehicle-to-Vehicle Cooperative Perception

Modern perception systems of autonomous vehicles are known to be sensitive to occlusions and lack the capability of long perceiving range. It has been one of the key bottlenecks that prevents Level 5 autonomy. Recent research has demonstrated that the Vehicle-to-Vehicle (V2V) cooperative perception system has great potential to revolutionize the autonomous driving industry. However, the lack of a real-world dataset hinders the progress of this field. To facilitate the development of cooperative perception, we present V2V4Real, the first large-scale real-world multi-modal dataset for V2V perception. The data is collected by two vehicles equipped with multi-modal sensors driving together through diverse scenarios. Our V2V4Real dataset covers a driving area of 410 km, comprising 20K LiDAR frames, 40K RGB frames, 240K annotated 3D bounding boxes for 5 classes, and HDMaps that cover all the driving routes. V2V4Real introduces three perception tasks, including cooperative 3D object detection, cooperative 3D object tracking, and Sim2Real domain adaptation for cooperative perception. We provide comprehensive benchmarks of recent cooperative perception algorithms on three tasks. The V2V4Real dataset can be found at https://research.seas.ucla.edu/mobility-lab/v2v4real/.

cs.CV↗
arXiv2023

View Adaptive Light Field Deblurring Networks with Depth Perception

The Light Field (LF) deblurring task is a challenging problem as the blur images are caused by different reasons like the camera shake and the object motion. The single image deblurring method is a possible way to solve this problem. However, since it deals with each view independently and cannot effectively utilize and maintain the LF structure, the restoration effect is usually not ideal. Besides, the LF blur is more complex because the degree is affected by the views and depth. Therefore, we carefully designed a novel LF deblurring network based on the LF blur characteristics. On one hand, since the blur degree varies a lot in different views, we design a novel view adaptive spatial convolution to deblur blurred LFs, which calculates the exclusive convolution kernel for each view. On the other hand, because the blur degree also varies with the depth of the object, a depth perception view attention is designed to deblur different depth areas by selectively integrating information from different views. Besides, we introduce an angular position embedding to maintain the LF structure better, which ensures the model correctly restores the view information. Quantitative and qualitative experimental results on synthetic and real images show that the deblurring effect of our method is better than other state-of-the-art methods.

cs.CV↗
arXiv2023

HiSSNet: Sound Event Detection and Speaker Identification via Hierarchical Prototypical Networks for Low-Resource Headphones

Modern noise-cancelling headphones have significantly improved users' auditory experiences by removing unwanted background noise, but they can also block out sounds that matter to users. Machine learning (ML) models for sound event detection (SED) and speaker identification (SID) can enable headphones to selectively pass through important sounds; however, implementing these models for a user-centric experience presents several unique challenges. First, most people spend limited time customizing their headphones, so the sound detection should work reasonably well out of the box. Second, the models should be able to learn over time the specific sounds that are important to users based on their implicit and explicit interactions. Finally, such models should have a small memory footprint to run on low-power headphones with limited on-chip memory. In this paper, we propose addressing these challenges using HiSSNet (Hierarchical SED and SID Network). HiSSNet is an SEID (SED and SID) model that uses a hierarchical prototypical network to detect both general and specific sounds of interest and characterize both alarm-like and speech sounds. We show that HiSSNet outperforms an SEID model trained using non-hierarchical prototypical networks by 6.9 - 8.6 percent. When compared to state-of-the-art (SOTA) models trained specifically for SED or SID alone, HiSSNet achieves similar or better performance while reducing the memory footprint required to support multiple capabilities on-device.

cs.LG↗
arXiv2023

Multi-Action Dialog Policy Learning from Logged User Feedback

Multi-action dialog policy, which generates multiple atomic dialog actions per turn, has been widely applied in task-oriented dialog systems to provide expressive and efficient system responses. Existing policy models usually imitate action combinations from the labeled multi-action dialog examples. Due to data limitations, they generalize poorly toward unseen dialog flows. While reinforcement learning-based methods are proposed to incorporate the service ratings from real users and user simulators as external supervision signals, they suffer from sparse and less credible dialog-level rewards. To cope with this problem, we explore to improve multi-action dialog policy learning with explicit and implicit turn-level user feedback received for historical predictions (i.e., logged user feedback) that are cost-efficient to collect and faithful to real-world scenarios. The task is challenging since the logged user feedback provides only partial label feedback limited to the particular historical dialog actions predicted by the agent. To fully exploit such feedback information, we propose BanditMatch, which addresses the task from a feedback-enhanced semi-supervised learning perspective with a hybrid objective of semi-supervised learning and bandit learning. BanditMatch integrates pseudo-labeling methods to better explore the action space through constructing full label feedback. Extensive experiments show that our BanditMatch outperforms the state-of-the-art methods by generating more concise and informative responses. The source code and the appendix of this paper can be obtained from https://github.com/ShuoZhangXJTU/BanditMatch.

cs.CL↗
arXiv2023

MPS-AMS: Masked Patches Selection and Adaptive Masking Strategy Based Self-Supervised Medical Image Segmentation

Existing self-supervised learning methods based on contrastive learning and masked image modeling have demonstrated impressive performances. However, current masked image modeling methods are mainly utilized in natural images, and their applications in medical images are relatively lacking. Besides, their fixed high masking strategy limits the upper bound of conditional mutual information, and the gradient noise is considerable, making less the learned representation information. Motivated by these limitations, in this paper, we propose masked patches selection and adaptive masking strategy based self-supervised medical image segmentation method, named MPS-AMS. We leverage the masked patches selection strategy to choose masked patches with lesions to obtain more lesion representation information, and the adaptive masking strategy is utilized to help learn more mutual information and improve performance further. Extensive experiments on three public medical image segmentation datasets (BUSI, Hecktor, and Brats2018) show that our proposed method greatly outperforms the state-of-the-art self-supervised baselines.

cs.CV↗
arXiv2023

Multi-Head Feature Pyramid Networks for Breast Mass Detection

Analysis of X-ray images is one of the main tools to diagnose breast cancer. The ability to quickly and accurately detect the location of masses from the huge amount of image data is the key to reducing the morbidity and mortality of breast cancer. Currently, the main factor limiting the accuracy of breast mass detection is the unequal focus on the mass boxes, leading the network to focus too much on larger masses at the expense of smaller ones. In the paper, we propose the multi-head feature pyramid module (MHFPN) to solve the problem of unbalanced focus of target boxes during feature map fusion and design a multi-head breast mass detection network (MBMDnet). Experimental studies show that, comparing to the SOTA detection baselines, our method improves by 6.58% (in AP@50) and 5.4% (in TPR@50) on the commonly used INbreast dataset, while about 6-8% improvements (in AP@20) are also observed on the public MIAS and BCS-DBT datasets.

cs.CV↗
arXiv2023

Semantic Segmentation Enhanced Transformer Model for Human Attention Prediction

Saliency Prediction aims to predict the attention distribution of human eyes given an RGB image. Most of the recent state-of-the-art methods are based on deep image feature representations from traditional CNNs. However, the traditional convolution could not capture the global features of the image well due to its small kernel size. Besides, the high-level factors which closely correlate to human visual perception, e.g., objects, color, light, etc., are not considered. Inspired by these, we propose a Transformer-based method with semantic segmentation as another learning objective. More global cues of the image could be captured by Transformer. In addition, simultaneously learning the object segmentation simulates the human visual perception, which we would verify in our investigation of human gaze control in cognitive science. We build an extra decoder for the subtask and the multiple tasks share the same Transformer encoder, forcing it to learn from multiple feature spaces. We find in practice simply adding the subtask might confuse the main task learning, hence Multi-task Attention Module is proposed to deal with the feature interaction between the multiple learning targets. Our method achieves competitive performance compared to other state-of-the-art methods.

cs.CV↗
arXiv2023

UserSimCRS: A User Simulation Toolkit for Evaluating Conversational Recommender Systems

We present an extensible user simulation toolkit to facilitate automatic evaluation of conversational recommender systems. It builds on an established agenda-based approach and extends it with several novel elements, including user satisfaction prediction, persona and context modeling, and conditional natural language generation. We showcase the toolkit with a pre-existing movie recommender system and demonstrate its ability to simulate dialogues that mimic real conversations, while requiring only a handful of manually annotated dialogues as training data.

cs.IR↗