arXiv subjects

Simone Milani

Publications and source records attributed to Simone Milani.

At least 19 recordsLinked to original sources

arXiv2026

Code Division Modulation Layers Against Forgetting and Inference in Continual Gait Identification

Continual learning (CL) has been recently employed in biometric identification systems thanks to its ability to integrate new knowledge within a pre-trained model and to the possibility of reducing the computational cost of training. Unfortunately, such approaches pose new challenges both in terms of final accuracy and privacy guarantees since a progressive fine-tuning of the model on small subsets expose them to catastrophic forgetting and successful inference attacks. This paper evaluates the efficiency of code division modulation layers (CDML) on a gait identification system which has been trained following a continual learning policy. The proposed approach preserves accuracy on all the tasks while mitigating membership inference attacks at the same time. Moreover, the impact of retransmission is minimized since replaying data is not necessary.

cs.MM↗

arXiv2026

Traceback Translators Against Forgetting in Continual Fake Speech Detection

Fake speech detectors are increasingly challenged by the development of new and more accurate generative models. To cope with this problem, continual learning techniques are nowadays widely considered feasible strategies for updating models to new datasets, but they also lead to decreased performance on previously seen samples (catastrophic forgetting). In this work, we propose a forgetting-resilient solution based on the adoption of domain translators within a frozen detector, which remaps the new feature spaces into the original ones by means of a traceback translator network. Experimental results show that this strategy enables the achievement of high detection rates with respect to traditional retraining, while minimizing the computational effort and preserving the detection accuracy on previous data.

cs.CV↗

arXiv2026

Explainable-by-Design Audio Deepfake Detection via Wiener-Hopf Linear Prediction

The rapid advancement of synthetic speech generation methods has made audio deepfake detection a critical challenge in multimedia forensics. While recent approaches achieve high detection accuracy, they typically rely on black-box architectures that offer limited interpretability and high computational complexity. In this paper, we propose an explainable-by-design audio deepfake detection framework based on Wiener-Hopf linear prediction, processed by a lightweight 2D Convolutional Neural Network (CNN). This design enables a direct and transparent connection between classification outcomes and the acoustic properties of the signal. Experimental results on benchmark datasets demonstrate competitive detection performance while maintaining significantly lower computational complexity compared to state-of-the-art solutions. The interpretability analysis using Grad-CAM reveals that the classifier focuses on low-order predictor coefficients and on silence and transitional regions, suggesting that the Wiener-Hopf predictor captures reverberation characteristics and subtle statistical inconsistencies in synthetic speech. Finally, robustness experiments show that fine-tuning effectively recovers detection performance under common post-processing degradations, including additive noise, MP3 compression, and telephone filtering.

cs.SD↗

arXiv2026

Split&Splat: Zero-Shot Panoptic Segmentation via Explicit Instance Modeling and 3D Gaussian Splatting

3D Gaussian Splatting (GS) enables fast and high-quality scene reconstruction, but it lacks an object-consistent and semantically aware structure. We propose Split&Splat, a framework for panoptic scene reconstruction using 3DGS. Our approach explicitly models object instances. It first propagates instance masks across views using depth, thus producing view-consistent 2D masks. Each object is then reconstructed independently and merged back into the scene while refining its boundaries. Finally, instance-level semantic descriptors are embedded in the reconstructed objects, supporting various applications, including panoptic segmentation, object retrieval, and 3D editing. Unlike existing methods, Split&Splat tackles the problem by first segmenting the scene and then reconstructing each object individually. This design naturally supports downstream tasks and allows Split&Splat to achieve state-of-the-art performance on the ScanNetv2 segmentation benchmark.

cs.GR↗

arXiv2025

MOCHA: Multi-modal Objects-aware Cross-arcHitecture Alignment

Personalized object detection aims to adapt a general-purpose detector to recognize user-specific instances from only a few examples. Lightweight models often struggle in this setting due to their weak semantic priors, while large vision-language models (VLMs) offer strong object-level understanding but are too computationally demanding for real-time or on-device applications. We introduce MOCHA (Multi-modal Objects-aware Cross-arcHitecture Alignment), a distillation framework that transfers multimodal region-level knowledge from a frozen VLM teacher into a lightweight vision-only detector. MOCHA extracts fused visual and textual teacher's embeddings and uses them to guide student training through a dual-objective loss that enforces accurate local alignment and global relational consistency across regions. This process enables efficient transfer of semantics without the need for teacher modifications or textual input at inference. MOCHA consistently outperforms prior baselines across four personalized detection benchmarks under strict few-shot regimes, yielding a +10.1 average improvement, with minimal inference cost.

cs.CV↗

arXiv2025

TeLL Me what you cant see

During criminal investigations, images of persons of interest directly influence the success of identification procedures. However, law enforcement agencies often face challenges related to the scarcity of high-quality images or their obsolescence, which can affect the accuracy and success of people searching processes. This paper introduces a novel forensic mugshot augmentation framework aimed at addressing these limitations. Our approach enhances the identification probability of individuals by generating additional, high-quality images through customizable data augmentation techniques, while maintaining the biometric integrity and consistency of the original data. Several experimental results show that our method significantly improves identification accuracy and robustness across various forensic scenarios, demonstrating its effectiveness as a trustworthy tool law enforcement applications. Index Terms: Digital Forensics, Person re-identification, Feature extraction, Data augmentation, Visual-Language models.

cs.CV↗

arXiv2025

SAGE: Semantic-Driven Adaptive Gaussian Splatting in Extended Reality

3D Gaussian Splatting (3DGS) has significantly improved the efficiency and realism of three-dimensional scene visualization in several applications, ranging from robotics to eXtended Reality (XR). This work presents SAGE (Semantic-Driven Adaptive Gaussian Splatting in Extended Reality), a novel framework designed to enhance the user experience by dynamically adapting the Level of Detail (LOD) of different 3DGS objects identified via a semantic segmentation. Experimental results demonstrate how SAGE effectively reduces memory and computational overhead while keeping a desired target visual quality, thus providing a powerful optimization for interactive XR applications.

cs.GR↗

arXiv2025

Point Cloud Geometry Scalable Coding Using a Resolution and Quality-conditioned Latents Probability Estimator

In the current age, users consume multimedia content in very heterogeneous scenarios in terms of network, hardware, and display capabilities. A naive solution to this problem is to encode multiple independent streams, each covering a different possible requirement for the clients, with an obvious negative impact in both storage and computational requirements. These drawbacks can be avoided by using codecs that enable scalability, i.e., the ability to generate a progressive bitstream, containing a base layer followed by multiple enhancement layers, that allow decoding the same bitstream serving multiple reconstructions and visualization specifications. While scalable coding is a well-known and addressed feature in conventional image and video codecs, this paper focuses on a new and very different problem, notably the development of scalable coding solutions for deep learning-based Point Cloud (PC) coding. The peculiarities of this 3D representation make it hard to implement flexible solutions that do not compromise the other functionalities of the codec. This paper proposes a joint quality and resolution scalability scheme, named Scalable Resolution and Quality Hyperprior (SRQH), that, contrary to previous solutions, can model the relationship between latents obtained with models trained for different RD tradeoffs and/or at different resolutions. Experimental results obtained by integrating SRQH in the emerging JPEG Pleno learning-based PC coding standard show that SRQH allows decoding the PC at different qualities and resolutions with a single bitstream while incurring only in a limited RD penalty and increment in complexity w.r.t. non-scalable JPEG PCC that would require one bitstream per coding configuration.

cs.CV↗

arXiv2024

Effectiveness of learning-based image codecs on fingerprint storage

The success of learning-based coding techniques and the development of learning-based image coding standards, such as JPEG-AI, point towards the adoption of such solutions in different fields, including the storage of biometric data, like fingerprints. However, the peculiar nature of learning-based compression artifacts poses several issues concerning their impact and effectiveness on extracting biometric features and landmarks, e.g., minutiae. This problem is utterly stressed by the fact that most models are trained on natural color images, whose characteristics are very different from usual biometric images, e.g, fingerprint or iris pictures. As a matter of fact, these issues are deemed to be accurately questioned and investigated, being such analysis still largely unexplored. This study represents the first investigation about the adaptability of learning-based image codecs in the storage of fingerprint images by measuring its impact on the extraction and characterization of minutiae. Experimental results show that at a fixed rate point, learned solutions considerably outperform previous fingerprint coding standards, like JPEG2000, both in terms of distortion and minutiae preservation. Indeed, experimental results prove that the peculiarities of learned compression artifacts do not prevent automatic fingerprint identification (since minutiae types and locations are not significantly altered), nor do compromise image quality for human visual inspection (as they gain in terms of BD rate and PSNR of 47.8% and +3.97dB respectively).

eess.IV↗

arXiv2024

Enhanced Model Robustness to Input Corruptions by Per-corruption Adaptation of Normalization Statistics

Developing a reliable vision system is a fundamental challenge for robotic technologies (e.g., indoor service robots and outdoor autonomous robots) which can ensure reliable navigation even in challenging environments such as adverse weather conditions (e.g., fog, rain), poor lighting conditions (e.g., over/under exposure), or sensor degradation (e.g., blurring, noise), and can guarantee high performance in safety-critical functions. Current solutions proposed to improve model robustness usually rely on generic data augmentation techniques or employ costly test-time adaptation methods. In addition, most approaches focus on addressing a single vision task (typically, image recognition) utilising synthetic data. In this paper, we introduce Per-corruption Adaptation of Normalization statistics (PAN) to enhance the model robustness of vision systems. Our approach entails three key components: (i) a corruption type identification module, (ii) dynamic adjustment of normalization layer statistics based on identified corruption type, and (iii) real-time update of these statistics according to input data. PAN can integrate seamlessly with any convolutional model for enhanced accuracy in several robot vision tasks. In our experiments, PAN obtains robust performance improvement on challenging real-world corrupted image datasets (e.g., OpenLoris, ExDark, ACDC), where most of the current solutions tend to fail. Moreover, PAN outperforms the baseline models by 20-30% on synthetic benchmarks in object recognition tasks.

cs.CV↗

arXiv2024

Fingerprint Membership and Identity Inference Against Generative Adversarial Networks

Generative models are gaining significant attention as potential catalysts for a novel industrial revolution. Since automated sample generation can be useful to solve privacy and data scarcity issues that usually affect learned biometric models, such technologies became widely spread in this field. In this paper, we assess the vulnerabilities of generative machine learning models concerning identity protection by designing and testing an identity inference attack on fingerprint datasets created by means of a generative adversarial network. Experimental results show that the proposed solution proves to be effective under different configurations and easily extendable to other biometric measurements.

cs.CV↗

arXiv2024

Point Cloud Geometry Scalable Coding with a Quality-Conditioned Latents Probability Estimator

The widespread usage of point clouds (PC) for immersive visual applications has resulted in the use of very heterogeneous receiving conditions and devices, notably in terms of network, hardware, and display capabilities. In this scenario, quality scalability, i.e., the ability to reconstruct a signal at different qualities by progressively decoding a single bitstream, is a major requirement that has yet to be conveniently addressed, notably in most learning-based PC coding solutions. This paper proposes a quality scalability scheme, named Scalable Quality Hyperprior (SQH), adaptable to learning-based static point cloud geometry codecs, which uses a Quality-conditioned Latents Probability Estimator (QuLPE) to decode a high-quality version of a PC learning-based representation, based on an available lower quality base layer. SQH is integrated in the future JPEG PC coding standard, allowing to create a layered bitstream that can be used to progressively decode the PC geometry with increasing quality and fidelity. Experimental results show that SQH offers the quality scalability feature with very limited or no compression performance penalty at all when compared with the corresponding non-scalable solution, thus preserving the significant compression gains over other state-of-the-art PC codecs.

cs.LG↗

arXiv2024

Enhancing the Rate-Distortion-Perception Flexibility of Learned Image Codecs with Conditional Diffusion Decoders

Learned image compression codecs have recently achieved impressive compression performances surpassing the most efficient image coding architectures. However, most approaches are trained to minimize rate and distortion which often leads to unsatisfactory visual results at low bitrates since perceptual metrics are not taken into account. In this paper, we show that conditional diffusion models can lead to promising results in the generative compression task when used as a decoder, and that, given a compressed representation, they allow creating new tradeoff points between distortion and perception at the decoder side based on the sampling method.

cs.CV↗

arXiv2023

Continual Road-Scene Semantic Segmentation via Feature-Aligned Symmetric Multi-Modal Network

State-of-the-art multimodal semantic segmentation strategies combining LiDAR and color data are usually designed on top of asymmetric information-sharing schemes and assume that both modalities are always available. This strong assumption may not hold in real-world scenarios, where sensors are prone to failure or can face adverse conditions that make the acquired information unreliable. This problem is exacerbated when continual learning scenarios are considered since they have stringent data reliability constraints. In this work, we re-frame the task of multimodal semantic segmentation by enforcing a tightly coupled feature representation and a symmetric information-sharing scheme, which allows our approach to work even when one of the input modalities is missing. We also introduce an ad-hoc class-incremental continual learning scheme, proving our approach's effectiveness and reliability even in safety-critical settings, such as autonomous driving. We evaluate our approach on the SemanticKITTI dataset, achieving impressive performances.

cs.CV↗

arXiv2023

All-for-One and One-For-All: Deep learning-based feature fusion for Synthetic Speech Detection

Recent advances in deep learning and computer vision have made the synthesis and counterfeiting of multimedia content more accessible than ever, leading to possible threats and dangers from malicious users. In the audio field, we are witnessing the growth of speech deepfake generation techniques, which solicit the development of synthetic speech detection algorithms to counter possible mischievous uses such as frauds or identity thefts. In this paper, we consider three different feature sets proposed in the literature for the synthetic speech detection task and present a model that fuses them, achieving overall better performances with respect to the state-of-the-art solutions. The system was tested on different scenarios and datasets to prove its robustness to anti-forensic attacks and its generalization capabilities.

cs.SD↗

arXiv2023

Continual Learning for LiDAR Semantic Segmentation: Class-Incremental and Coarse-to-Fine strategies on Sparse Data

During the last few years, continual learning (CL) strategies for image classification and segmentation have been widely investigated designing innovative solutions to tackle catastrophic forgetting, like knowledge distillation and self-inpainting. However, the application of continual learning paradigms to point clouds is still unexplored and investigation is required, especially using architectures that capture the sparsity and uneven distribution of LiDAR data. The current paper analyzes the problem of class incremental learning applied to point cloud semantic segmentation, comparing approaches and state-of-the-art architectures. To the best of our knowledge, this is the first example of class-incremental continual learning for LiDAR point cloud semantic segmentation. Different CL strategies were adapted to LiDAR point clouds and tested, tackling both classic fine-tuning scenarios and the Coarse-to-Fine learning paradigm. The framework has been evaluated through two different architectures on SemanticKITTI, obtaining results in line with state-of-the-art CL strategies and standard offline learning.

cs.CV↗

arXiv2023

Learning from Mistakes: Self-Regularizing Hierarchical Representations in Point Cloud Semantic Segmentation

Recent advances in autonomous robotic technologies have highlighted the growing need for precise environmental analysis. LiDAR semantic segmentation has gained attention to accomplish fine-grained scene understanding by acting directly on raw content provided by sensors. Recent solutions showed how different learning techniques can be used to improve the performance of the model, without any architectural or dataset change. Following this trend, we present a coarse-to-fine setup that LEArns from classification mistaKes (LEAK) derived from a standard model. First, classes are clustered into macro groups according to mutual prediction errors; then, the learning process is regularized by: (1) aligning class-conditional prototypical feature representation for both fine and coarse classes, (2) weighting instances with a per-class fairness index. Our LEAK approach is very general and can be seamlessly applied on top of any segmentation architecture; indeed, experimental results showed that it enables state-of-the-art performances on different architectures, datasets and tasks, while ensuring more balanced class-wise results and faster convergence.

cs.CV↗

arXiv2022

The Sound of Silence: Efficiency of First Digit Features in Synthetic Audio Detection

The recent integration of generative neural strategies and audio processing techniques have fostered the widespread of synthetic speech synthesis or transformation algorithms. This capability proves to be harmful in many legal and informative processes (news, biometric authentication, audio evidence in courts, etc.). Thus, the development of efficient detection algorithms is both crucial and challenging due to the heterogeneity of forgery techniques. This work investigates the discriminative role of silenced parts in synthetic speech detection and shows how first digit statistics extracted from MFCC coefficients can efficiently enable a robust detection. The proposed procedure is computationally-lightweight and effective on many different algorithms since it does not rely on large neural detection architecture and obtains an accuracy above 90\% in most of the classes of the ASVSpoof dataset.

cs.SD↗