arXiv subjects

Suvrath Mahadevan

Publications and source records attributed to Suvrath Mahadevan.

At least 145 records · Page 8Linked to original sources

arXiv2020

Frequency stability of the mode spectrum of broad bandwidth Fabry-Perot interferometers

When illuminated by a white light source, the discrete resonances of a Fabry-Perot interferometer (FP) provide a broad bandwidth, comb-like spectrum useful for frequency calibration. We report on the design, construction and laboratory characterization of two planar, passively stabilized, low finesse (~40) FPs spanning 380 nm to 930 nm and 780 nm to 1300 nm, with nominal free spectral ranges of 20 GHz and 30 GHz respectively. These instruments are intended to calibrate astronomical spectrographs in radial velocity searches for extrasolar planets. By tracking the frequency drift of three widely-separated resonances in each FP we measure fractional frequency drift rates as low as 1 x 10^(-10) / day. However we find that the fractional drift rate varies across the three sample wavelengths, such that the drift of two given resonance modes disagrees with the ratio of their mode numbers. We explore possible causes of this behavior, as well as quantify the temperature and optical power sensitivity of the FPs. Our results demonstrate the advancement of Fabry-Perot interferometers as robust and frequency-stable calibrators for astronomical and other broad bandwidth spectroscopy applications, but also highlight the need for chromatic characterization of these systems.

astro-ph.IM↗

arXiv2020

The SDSS-HET Survey of Kepler Eclipsing Binaries. Description of the Survey and First Results

The Kepler mission has provided a treasure trove of eclipsing binaries (EBs), observed at extremely high photometric precision, nearly continuously for several years. We are carrying out a survey of ~100 of these EBs to derive dynamical masses and radii with precisions of 3% or better. We use multiplexed near-infrared H band spectroscopy from the SDSS-III and -IV APOGEE instrument and optical spectroscopy from the HET High-Resolution Spectrograph to derive double-lined spectroscopic orbits and dynamical mass-ratios for the EB sample. This information is combined with Kepler photometry to derive orbital inclination, dynamical masses of the components, radii and temperatures. These measurements are directly applicable for benchmarking stellar models that are integrating the next generation of improvements, such as the magnetic suppression of convection efficiency, updated opacity tables, and fine-tuned equations of state. We selected our EB sample to include systems with low-mass ($M \lt 0.8 \; M_{\odot}$) primary or secondary components, many expected to populate the relatively sparse parameter space below $0.5 \; M_{\odot}$. In this paper, we describe our EB sample and the analysis techniques we are utilizing, and present masses and radii for two systems that inhabit particularly underpopulated regions of mass-radius-period space: KIC 2445134 and KIC 3003991. Our analysis of KIC 2445134 ($q=0.411 \pm 0.001$) yields masses and radii of $M_A = 1.29 \pm 0.03 \; M_{\odot}$, $M_B = 0.53 \pm 0.01 \; M_{\odot}$, $R_A = 1.42 \pm 0.01 \; R_{\odot}$, $R_B = 0.510 \pm 0.004 \; R_{\odot}$, and a temperature ratio of $T_B/T_A = 0.635 \pm 0.001$; our analysis of KIC 3003991 ($q=0.298 \pm 0.006$) yields $M_A = 0.74 \pm \; 0.04 M_{\odot}$, $M_B = 0.222 \pm \; 0.007 M_{\odot}$, $R_A = 0.84 \pm 0.01 \; R_{\odot}$, $R_B = 0.250 \pm 0.004 \; R_{\odot}$, and a temperature ratio of $T_B/T_A= 0.662 \pm 0.001$.

astro-ph.SR↗

arXiv2020

Evidence for He I 10830 Å~ absorption during the transit of a warm Neptune around the M-dwarf GJ 3470 with the Habitable-zone Planet Finder

Understanding the dynamics and kinematics of out-flowing atmospheres of hot and warm exoplanets is crucial to understanding the origins and evolutionary history of the exoplanets near the evaporation desert. Recently, ground based measurements of the meta-stable Helium atom's resonant absorption at 10830 Å~has become a powerful probe of the base environment which is driving the outflow of exoplanet atmospheres. We report evidence for the He I 10830 Å~in absorption (equivalent width $\sim$ $0.012 \pm 0.002$ Å) in the exosphere of a warm Neptune orbiting the M-dwarf GJ 3470, during three transits using the Habitable Zone Planet Finder (HPF) near infrared spectrograph. This marks the first reported evidence for He I 10830 Å\, atmospheric absorption for a planet orbiting an M-dwarf. Our detected absorption is broad and its blueshifted wing extends to -36 km/sec, the largest reported in the literature to date. We modelled the state of Helium atoms in the exosphere of GJ3470b based on assumptions on the UV and X-ray flux of GJ 3470, and found our measurement of flux-weighted column density of meta-stable state Helium $(N_{He^2_3S} = 2.4 \times 10^{10} \mathrm{cm^{-2}})$, derived from our transit observations, to be consistent with model, within its uncertainties. The methodology developed here will be useful to study and constrain the atmospheric outflow models of other exoplanets like GJ 3470b which are near the edge of the evaporation desert.

astro-ph.EP↗

arXiv2020

Solar Contamination in Extreme Precision Radial Velocity Measurements: Deleterious Effects and Prospects for Mitigation

Solar contamination, due to moonlight and atmospheric scattering of sunlight, can cause systematic errors in stellar radial velocity (RV) measurements that significantly detract from the ~10cm/s sensitivity required for the detection and characterization of terrestrial exoplanets in or near Habitable Zones of Sun-like stars. The addition of low-level spectral contamination at variable effective velocity offsets introduces systematic noise when measuring velocities using classical mask-based or template-based cross-correlation techniques. Here we present simulations estimating the range of RV measurement error induced by uncorrected scattered sunlight contamination. We explore potential correction techniques, using both simultaneous spectrometer sky fibers and broadband imaging via coherent fiber imaging bundles, that could reliably reduce this source of error to below the photon-noise limit of typical stellar observations. We discuss the limitations of these simulations, the underlying assumptions, and mitigation mechanisms. We also present and discuss the components designed and built into the NEID precision RV instrument for the WIYN 3.5m telescope, to serve as an ongoing resource for the community to explore and evaluate correction techniques. We emphasize that while "bright time" has been traditionally adequate for RV science, the goal of 10cm/s precision on the most interesting exoplanetary systems may necessitate access to darker skies for these next-generation instruments.

astro-ph.IM↗

arXiv2020

Stellar Characterization of M-dwarfs from the APOGEE Survey: A Calibrator Sample for the M-dwarf Metallicities

We present spectroscopic determinations of the effective temperatures, surface gravities and metallicities for 21 M-dwarfs observed at high-resolution (R $\sim$ 22,500) in the \textit{H}-band as part of the SDSS-IV APOGEE survey. The atmospheric parameters and metallicities are derived from spectral syntheses with 1-D LTE plane parallel MARCS models and the APOGEE atomic/molecular line list, together with up-to-date H$_{2}$O and FeH molecular line lists. Our sample range in $T_{\rm eff}$ from $\sim$ 3200 to 3800K, where eleven stars are in binary systems with a warmer (FGK) primary, while the other 10 M-dwarfs have interferometric radii in the literature. We define an $M_{K_{S}}$--Radius calibration based on our M-dwarf radii derived from the detailed analysis of APOGEE spectra and Gaia DR2 distances, as well as a mass-radius relation using the spectroscopically-derived surface gravities. A comparison of the derived radii with interferometric values from the literature finds that the spectroscopic radii are slightly offset towards smaller values, with $Δ$ = -0.01 $\pm$ 0.02 $R{\star}$/$R_{\odot}$. In addition, the derived M-dwarf masses based upon the radii and surface gravities tend to be slightly smaller (by $\sim$5-10\%) than masses derived for M-dwarf members of eclipsing binary systems for a given stellar radius. The metallicities derived for the 11 M-dwarfs in binary systems, compared to metallicities obtained for their hotter FGK main-sequence primary stars from the literature, shows excellent agreement, with a mean difference of [Fe/H](M-dwarf - FGK primary) = +0.04 $\pm$ 0.18 dex, confirming the APOGEE metallicity scale derived here for M-dwarfs.

astro-ph.SR↗

arXiv2019

A sub-Neptune sized planet transiting the M2.5-dwarf G 9-40: Validation with the Habitable-zone Planet Finder

We validate the discovery of a 2 Earth radii sub-Neptune-size planet around the nearby high proper motion M2.5-dwarf G 9-40 (EPIC 212048748), using high-precision near-infrared (NIR) radial velocity (RV) observations with the Habitable-zone Planet Finder (HPF), precision diffuser-assisted ground-based photometry with a custom narrow-band photometric filter, and adaptive optics imaging. At a distance of $d=27.9\mathrm{pc}$, G 9-40b is the second closest transiting planet discovered by K2 to date. The planet's large transit depth ($\sim$3500ppm), combined with the proximity and brightness of the host star at NIR wavelengths (J=10, K=9.2) makes G 9-40b one of the most favorable sub-Neptune-sized planet orbiting an M-dwarf for transmission spectroscopy with JWST, ARIEL, and the upcoming Extremely Large Telescopes. The star is relatively inactive with a rotation period of $\sim$29 days determined from the K2 photometry. To estimate spectroscopic stellar parameters, we describe our implementation of an empirical spectral matching algorithm using the high-resolution NIR HPF spectra. Using this algorithm, we obtain an effective temperature of $T_{\mathrm{eff}}=3404\pm73$K, and metallicity of $\mathrm{[Fe/H]}=-0.08\pm0.13$. Our RVs, when coupled with the orbital parameters derived from the transit photometry, exclude planet masses above $11.7 M_\oplus$ with 99.7% confidence assuming a circular orbit. From its radius, we predict a mass of $M=5.0^{+3.8}_{-1.9} M_\oplus$ and an RV semi-amplitude of $K=4.1^{+3.1}_{-1.6}\mathrm{m\:s^{-1}}$, making its mass measurable with current RV facilities. We urge further RV follow-up observations to precisely measure its mass, to enable precise transmission spectroscopic measurements in the future.

astro-ph.EP↗

arXiv2019

Improving the Thermal Stability of a CCD Through Clocking

Modern precise radial velocity spectrometers are designed to infer the existence of planets orbiting other stars by measuring few-nm shifts in the positions of stellar spectral lines recorded at high spectral resolution on a large-area digital detector. While the spectrometer may be highly stabilized in terms of temperature, the detector itself may undergo changes in temperature during readout that are an order of magnitude or more larger than the other opto-mechanical components within the instrument. These variations in detector temperature can translate directly into systematic measurement errors. We explore a technique for reducing the amplitude of CCD temperature variations by shuffling charge within a pixel in the parallel direction during integration. We find that this "dither clocking" mode greatly reduces temperature variations in the CCDs being tested for the NEID spectrometer. We investigate several potential negative effects this clocking scheme could have on the underlying spectral data.

astro-ph.IM↗

arXiv2019

Mass-Radius relationship for M dwarf exoplanets: Comparing nonparametric and parametric methods

M dwarfs, though the most abundant star in the galaxy, form only a small subset of stellar hosts with exoplanets with measured radii and masses. In this paper we analyze the Mass-Radius (M-R) relationship of planets around M dwarfs using M-R measurements for 24 exoplanets. In particular, we apply both parametric and nonparametric models and compare the two different fitting methods. We also use these methods to compare the results of the M dwarf M-R relationship with that from the Kepler sample. Using the nonparametric method, we find that the predicted masses for the smallest and largest planets around M dwarfs are smaller than that given by the relation fit to the Kepler data, but that the distribution of masses for 3 Earth Radii planets does not substantially differ between the two datasets. With future additions to the M dwarf M-R relation from TESS and instruments like the Habitable Zone Planet Finder, we will be able to characterize these differences in more detail, which will help illuminate the process of planetary formation and evolution around these stars. We release a publicly available Python code called MRExo which uses the nonparametric algorithm introduced by Ning et al. (2018) to fit the M-R relationship. Such a nonparametric fit does not assume an underlying power law fit to the measurements and hence can be used on samples spanning large mass and radii ranges. Therefore by not assuming a functional form, the fit is less biased. MRExo also offers a tool to predict mass from radius posteriors, and vice versa. This functionality can help inform observational strategies for radial velocity campaigns, such as TESS follow-up studies, as well as predict radii with microlensing planet masses.

astro-ph.EP↗

arXiv2019

It takes two planets in resonance to tango around K2-146

K2-146 is a cool, 0.358 M_sun dwarf that was found to host a mini-Neptune with a 2.67-days period. The planet exhibited strong transit timing variations (TTVs) of greater than 30 minutes, indicative of the presence of a further object in the system. Here we report the discovery of the previously undetected outer planet, K2-146 c, in the system using additional photometric data. K2-146 c was found to have a grazing transit geometry and a 3.97-day period. The outer planet was only significantly detected in the latter K2 campaigns presumably because of precession of its orbital plane. The TTVs of K2-146 b and c were measured using observations spanning a baseline of almost 1200 days. We found strong anti-correlation in the TTVs, suggesting the two planets are gravitationally interacting. Our TTV and transit model analyses revealed that K2-146 b has a radius of 2.25 $\pm$ 0.10 \R_earth and a mass of 5.6 $\pm$ 0.7 M_earth, whereas K2-146 c has a radius of $2.59_{-0.39}^{+1.81}$ R_earth and a mass of 7.1 $\pm$ 0.9 M_earth. The inner and outer planets likely have moderate eccentricities of $e = 0.14 \pm 0.07$ and $0.16 \pm 0.07$, respectively. Long-term numerical integrations of the two-planet orbital solution show that it can be dynamically stable for at least 2 Myr. The evaluation of the resonance angles of the planet pair indicates that K2-146 b and c are likely trapped in a 3:2 mean motion resonance. The orbital architecture of the system points to a possible convergent migration origin.

astro-ph.EP↗

arXiv2019

Constraining Exoplanet Metallicities and Aerosols with ARIEL: An Independent Study by the Contribution to ARIEL Spectroscopy of Exoplanets (CASE) Team

Launching in 2028, ESA's Atmospheric Remote-sensing Exoplanet Large-survey (ARIEL) survey of $\sim$1000 transiting exoplanets will build on the legacies of Kepler and TESS and complement JWST by placing its high precision exoplanet observations into a large, statistically-significant planetary population context. With continuous 0.5--7.8~$μ$m coverage from both FGS (0.50--0.55, 0.8--1.0, and 1.0--1.2~$μ$m photometry; 1.25--1.95~$μ$m spectroscopy) and AIRS (1.95--7.80~$μ$m spectroscopy), ARIEL will determine atmospheric compositions and probe planetary formation histories during its 3.5-year mission. NASA's proposed Contribution to ARIEL Spectroscopy of Exoplanets (CASE) would be a subsystem of ARIEL's FGS instrument consisting of two visible-to-infrared detectors, associated readout electronics, and thermal control hardware. FGS, to be built by the Polish Academy of Sciences' Space Research Centre, will provide both fine guiding and visible to near-infrared photometry and spectroscopy, providing powerful diagnostics of atmospheric aerosol contribution and planetary albedo, which play a crucial role in establishing planetary energy balance. The CASE team presents here an independent study of the capabilities of ARIEL to measure exoplanetary metallicities, which probe the conditions of planet formation, and FGS to measure scattering spectral slopes, which indicate if an exoplanet has atmospheric aerosols (clouds and hazes), and geometric albedos, which help establish planetary climate. Our design reference mission simulations show that ARIEL could measure the mass-metallicity relationship of its 1000-planet single-visit sample to $>7.5σ$ and that FGS could distinguish between clear, cloudy, and hazy skies and constrain an exoplanet's atmospheric aerosol composition to $>5σ$ for hundreds of targets, providing statistically-transformative science for exoplanet atmospheres.

astro-ph.EP↗

arXiv2019

TOI-150: A transiting hot Jupiter in the TESS southern CVZ

We report the detection of a hot Jupiter ($M_{p}=1.75_{-0.17}^{+0.14}\ M_{J}$, $R_{p}=1.38\pm0.04\ R_{J}$) orbiting a middle-aged star ($\log g=4.152^{+0.030}_{-0.043}$) in the Transiting Exoplanet Survey Satellite (TESS) southern continuous viewing zone ($β=-79.59^{\circ}$). We confirm the planetary nature of the candidate TOI-150.01 using radial velocity observations from the APOGEE-2 South spectrograph and the Carnegie Planet Finder Spectrograph, ground-based photometric observations from the robotic Three-hundred MilliMeter Telescope at Las Campanas Observatory, and Gaia distance estimates. Large-scale spectroscopic surveys, such as APOGEE/APOGEE-2, now have sufficient radial velocity precision to directly confirm the signature of giant exoplanets, making such data sets valuable tools in the TESS era. Continual monitoring of TOI-150 by TESS can reveal additional planets and subsequent observations can provide insights into planetary system architectures involving a hot Jupiter around a star about halfway through its main-sequence life.

astro-ph.EP↗

arXiv2019

Impact of crosshatch patterns in H2RGs on high precision radial velocity measurements: Exploration of measurement and mitigation paths with HPF

Teledyne's H2RG detector images suffer from cross-hatch like patterns which arises from sub-pixel quantum efficiency (QE) variation. In this paper we present our measurements of this sub-pixel QE variation in the Habitable-Zone Planet Finder's H2RG detector. We present a simple model to estimate the impact of sub-pixel QE variations on the radial velocity, and how a first order correction can be implemented to correct for the artifact in the spectrum. We also present how the HPF's future upgraded laser frequency comb will enable us to implement this correction.

astro-ph.IM↗

arXiv2019

Ultra-Stable Environment Control for the NEID Spectrometer: Design and Performance Demonstration

Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEID's optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.

astro-ph.IM↗

arXiv2019

Stellar Spectroscopy in the Near-infrared with a Laser Frequency Comb

The discovery and characterization of exoplanets around nearby stars is driven by profound scientific questions about the uniqueness of Earth and our Solar System, and the conditions under which life could exist elsewhere in our Galaxy. Doppler spectroscopy, or the radial velocity (RV) technique, has been used extensively to identify hundreds of exoplanets, but with notable challenges in detecting terrestrial mass planets orbiting within habitable zones. We describe infrared RV spectroscopy at the 10 m Hobby-Eberly telescope that leverages a 30 GHz electro-optic laser frequency comb with nanophotonic supercontinuum to calibrate the Habitable Zone Planet Finder spectrograph. Demonstrated instrument precision <10 cm/s and stellar RVs approaching 1 m/s open the path to discovery and confirmation of habitable zone planets around M-dwarfs, the most ubiquitous type of stars in our Galaxy.

astro-ph.EP↗

arXiv2019

Kepler-730: A hot Jupiter system with a close-in, transiting, Earth-sized planet

Kepler-730 is a planetary system hosting a statistically validated hot Jupiter in a 6.49-day orbit and an additional transiting candidate in a 2.85-day orbit. We use spectroscopic radial velocities from the APOGEE-2N instrument, Robo-AO contrast curves, and Gaia distance estimates to statistically validate the planetary nature of the additional Earth-sized candidate. We perform astrophysical false positive probability calculations for the candidate using the available Kepler data and bolster the statistical validation by using radial velocity data to exclude a family of possible binary star solutions. Using a radius estimate for the primary star derived from stellar models, we compute radii of $1.100^{+0.047}_{-0.050}\ R_{Jup}$ and $0.140\pm0.012\ R_{Jup}$ ($1.57\pm0.13\ R_{\oplus}$) for Kepler-730b and Kepler-730c, respectively. Kepler-730 is only the second compact system hosting a hot Jupiter with an inner, transiting planet.

astro-ph.EP↗

arXiv2018

Measuring the Recoverability of Close Binaries in Gaia DR2 with the Robo-AO Kepler Survey

We use the Robo-AO survey of Kepler planetary candidate host stars, the largest adaptive optics survey yet performed, to measure the recovery rate of close stellar binaries in Gaia DR2. We find that Gaia recovers binaries down to 1" at magnitude contrasts as large as 6; closer systems are not resolved, regardless of secondary brightness. Gaia DR2 binary detection does not have a strong dependence on the orientation of the stellar pairs. We find 177 nearby stars to Kepler planetary candidate host stars in Gaia DR2 that were not detected in the Robo-AO survey, almost all of which are faint (G>20); the remainder were largely targets observed by Robo-AO in poor conditions. If the primary star is the host, the impact on the radii estimates of planet candidates in these systems is likely minimal; many of these faint stars, however, could be faint eclipsing binaries that are the source of a false positive planetary transit signal. With Robo-AO and Gaia combined, we find that 18.7% of Kepler planet candidate hosts have nearby stars within 4". We also find 36 nearby stars in Gaia DR2 around 35 planetary candidate host stars detected with K2. The nearby star fraction rate for K2 planetary candidates is significantly lower than that for the primary Kepler mission. The binary recovery rate of Gaia will improve initial radius estimates of future TESS planet candidates significantly, however ground-based high-resolution follow-up observations are still needed for precise characterization and confirmation. The sensitivity of Gaia to closely separated binaries is expected to improve in later data releases.

astro-ph.EP↗

arXiv2018

Extreme precision photometry from the ground with beam-shaping diffusers for K2, TESS and beyond

The Transiting Exoplanet Survey Satellite (TESS, launched early 2018) is expected to find a multitude of new transiting planet candidates around the nearest and brightest stars. Timely high-precision follow-up observations from the ground are essential in confirming and further characterizing the planet candidates that TESS will find. However, achieving extreme photometric precisions from the ground is challenging, as ground-based telescopes are subject to numerous deleterious atmospheric effects. Beam-shaping diffusers are emerging as a low-cost technology to achieve hitherto unachievable differential photometric precisions from the ground. These diffusers mold the focal plane image of a star into a broad and stable top-hat shape, minimizing photometric errors due to non-uniform pixel response, atmospheric seeing effects, imperfect guiding, and telescope-induced variable aberrations seen in defocusing. In this paper, we expand on our previous work (Stefansson et al. 2017; Stefansson et al. 2018 [submitted]), providing a further detailed discussion of key guidelines when sizing a diffuser for use on a telescope. Furthermore, we present our open source Python package iDiffuse which can calculate the expected PSF size of a diffuser in a telescope system, along with its expected on-sky diffuser-assisted photometric precision for a host star of a given magnitude. We use iDiffuse to show that most ($\sim$80\%) of the planet hosts that TESS will find will be scintillation limited in transit observations from the ground. Although iDiffuse has primarily been developed to plan challenging transit observations using the diffuser on the ARCTIC imager on the ARC 3.5m Telescope at Apache Point observatory, iDiffuse is modular and can be easily extended to calculate the expected diffuser-assisted photometric precisions on other telescopes.

astro-ph.IM↗

arXiv2018

Overview of the spectrometer optical fiber feed for the Habitable-zone Planet Finder

The Habitable-zone Planet Finder (HPF) is a highly stabilized fiber fed precision radial velocity (RV) spectrograph working in the Near Infrared (NIR): 810 - 1280 nm . In this paper we present an overview of the preparation of the optical fibers for HPF. The entire fiber train from the telescope focus down to the cryostat is detailed. We also discuss the fiber polishing, splicing and its integration into the instrument using a fused silica puck. HPF was designed to be able to operate in two modes, High Resolution (HR- the only mode mode currently commissioned) and High Efficiency (HE). We discuss these fiber heads and the procedure we adopted to attach the slit on to the HR fibers.

astro-ph.IM↗