Search arXiv⌕ Search

arXiv subjects

Teng Zhang

Publications and source records attributed to Teng Zhang.

At least 163 records · Page 9Linked to original sources

Exploring Adversarial Examples for Efficient Active Learning in Machine Learning Classifiers

Machine learning researchers have long noticed the phenomenon that the model training process will be more effective and efficient when the training samples are densely sampled around the underlying decision boundary. While this observation has already been widely applied in a range of machine learning security techniques, it lacks theoretical analyses of the correctness of the observation. To address this challenge, we first add particular perturbation to original training examples using adversarial attack methods so that the generated examples could lie approximately on the decision boundary of the ML classifiers. We then investigate the connections between active learning and these particular training examples. Through analyzing various representative classifiers such as k-NN classifiers, kernel methods as well as deep neural networks, we establish a theoretical foundation for the observation. As a result, our theoretical proofs provide support to more efficient active learning methods with the help of adversarial examples, contrary to previous works where adversarial examples are often used as destructive solutions. Experimental results show that the established theoretical foundation will guide better active learning strategies based on adversarial examples.

cs.LG↗

Enhancing high frequency sensitivity of gravitational wave detectors with sloshing-Sagnac interferometer

Sensitivity of gravitational-wave detectors is limited in the high-frequency band by quantum shot noise and eventually limited by the optical loss in signal recycling cavity. This limit is the main obstacle on the way to detect gravitational waves from the binary neutron star mergers in the current and the future generation detectors, as it does not depend on either the arm length, or the injected squeezing level. In this paper, we come up with the sloshing Sagnac interferometer topology, which can be obtained from the Michelson interferometer by optically connecting the end mirrors into an additional optical cavity. This transforms the interferometer into a triply-coupled cavity system capable of beating the loss-induced high-frequency limit of the signal-recycled Michelson interferometer. With advanced LIGO+ comparable parameters, a sloshing-Sagnac scheme can achieve 7 times better sensitivity at 2.5\,kHz or 4 times better signal to noise ratio for a typical waveform of binary neutron post merge. Being an evolution of Michelson interferometer, the sloshing-Sagnac interferometer can possibly be used as a topology for the future generation detectors and upgrade of current detectors.

gr-qc↗

FaceCook: Face Generation Based on Linear Scaling Factors

With the excellent disentanglement properties of state-of-the-art generative models, image editing has been the dominant approach to control the attributes of synthesised face images. However, these edited results often suffer from artifacts or incorrect feature rendering, especially when there is a large discrepancy between the image to be edited and the desired feature set. Therefore, we propose a new approach to mapping the latent vectors of the generative model to the scaling factors through solving a set of multivariate linear equations. The coefficients of the equations are the eigenvectors of the weight parameters of the pre-trained model, which form the basis of a hyper coordinate system. The qualitative and quantitative results both show that the proposed method outperforms the baseline in terms of image diversity. In addition, the method is much more time-efficient because you can obtain synthesised images with desirable features directly from the latent vectors, rather than the former process of editing randomly generated images requiring many processing steps.

cs.CV↗

Ultrawide Frequency Tuning of Atomic Layer van der Waals Heterostructure Electromechanical Resonators

We report on the experimental demonstration of atomically thin molybdenum disulfide (MoS2)-graphene van der Waals (vdW) heterostructure nanoelectromechanical resonators with ultrawide frequency tuning. With direct electrostatic gate tuning, these vdW resonators exhibit exceptional tunability, in general, Δf/f0 >200%, for continuously tuning the same device and the same mode (e.g., from ~23 to ~107MHz), up to Δf/f0 = 370%, the largest fractional tuning range in such resonators to date. This remarkable electromechanical resonance tuning is investigated by two different analytical models and finite element simulations. Further, we carefully perform clear control experiments and simulations to elucidate the difference in frequency tuning between heterostructure and single-material resonators. At a given initial strain level, the tuning range depends on the two-dimensional (2D) Young's moduli of the constitutive crystals; devices built on materials with lower 2D moduli show wider tuning ranges. This study exemplifies that vdW heterostructure resonators can retain unconventionally broad, continuous tuning, which is promising for voltage-controlled, tunable nanosystems.

cond-mat.mes-hall↗

Experimental evidence of chiral symmetry breaking in Kekulé-ordered graphene

The low-energy excitations of graphene are relativistic massless Dirac fermions with opposite chiralities at valleys K and K'. Breaking the chiral symmetry could lead to gap opening in analogy to dynamical mass generation in particle physics. Here we report direct experimental evidences of chiral symmetry breaking (CSB) from both microscopic and spectroscopic measurements in a Li-intercalated graphene. The CSB is evidenced by gap opening at the Dirac point, Kekulé-O type modulation, and chirality mixing near the gap edge. Our work opens up opportunities for investigating CSB related physics in a Kekulé-ordered graphene.

cond-mat.mes-hall↗

A two-carrier scheme: evading the 3dB quantum penalty of heterodyne readout in gravitational-wave detectors

Precision measurements using traditional heterodyne readout suffer a 3dB quantum noise penalty compared with homodyne readout. The extra noise is caused by the quantum fluctuations in the image vacuum. We propose a two-carrier gravitational-wave detector design that evades the 3dB quantum penalty of heterodyne readout. We further propose a new way of realising frequency-dependent squeezing utilising two-mode squeezing in our scheme. It naturally achieves more precise audio frequency signal measurements with radio frequency squeezing. In addition, the detector is compatible with other quantum nondemolition techniques.

gr-qc↗

Robust subspace recovery by Tyler's M-estimator

This paper considers the problem of robust subspace recovery: given a set of $N$ points in $\mathbb{R}^D$, if many lie in a $d$-dimensional subspace, then can we recover the underlying subspace? We show that Tyler's M-estimator can be used to recover the underlying subspace, if the percentage of the inliers is larger than $d/D$ and the data points lie in general position. Empirically, Tyler's M-estimator compares favorably with other convex subspace recovery algorithms in both simulations and experiments on real data sets.

stat.ML↗

Direct identification of Mott Hubbard band pattern beyond charge density wave superlattice in monolayer 1T-NbSe2

Understanding Mott insulators and charge density waves (CDW) is critical for both fundamental physics and future device applications. However, the relationship between these two phenomena remains unclear, particularly in systems close to two-dimensional (2D) limit. In this study, we utilize scanning tunneling microscopy/spectroscopy to investigate monolayer 1T-NbSe2 to elucidate the energy of the Mott upper Hubbard band (UHB), and reveal that the spin-polarized UHB is spatially distributed away from the dz2 orbital at the center of the CDW unit. Moreover, the UHB shows a root3 x root3 R30° periodicity in addition to the typically observed CDW pattern. Furthermore, a pattern similar to the CDW order is visible deep in the Mott gap, exhibiting CDW without contribution of the Mott Hubbard band. Based on these findings in monolayer 1T-NbSe2, we provide novel insights into the relation between the correlated and collective electronic structures in monolayer 2D systems.

cond-mat.str-el↗

Understanding and controlling hexagonal patterns of wrinkles in neo-Hookean elastic bilayer structures

A controlled surface wrinkling pattern has been widely used in diverse applications, such as stretchable electronics, smart windows, and haptics. Here, we focus on hexagonal wrinkling patterns because of their great potentials in realizing anisotropic and tunable friction and serving as a dynamical template for making non-flat thin films through self-assembling processes. We employ large-scale finite element simulations of a bilayer neo-Hookean solid (e.g., a film bonded on a substrate) to explore mechanical principles that govern the formation of hexagonal wrinkling patterns and strategies for making nearly perfect hexagonal patterns. In our model, the wrinkling instabilities are driven by the confined film expansion. Our results indicate robust hexagonal patterns exist at a relatively small modulus mismatch (on the order of 10) between the film and substrate. Besides, the film expansion should not exceed the onset of wrinkling value too much to avoid post-buckling patterns. By harnessing the imperfection insensitivity of one-dimension sinusoidal wrinkles, we apply a sequential loading to the bilayer structure to produce the nearly perfect hexagonal patterns. Lastly, we discuss the connection between the simple bilayer model and the gradient structures commonly existed in experiments.

cond-mat.soft↗

A Broadband Signal Recycling Scheme for Approaching the Quantum Limit from Optical Losses

Quantum noise limits the sensitivity of laser interferometric gravitational-wave detectors. Given the state-of-the-art optics, the optical losses define the lower bound of the best possible quantum-limited detector sensitivity. In this work, we come up with a broadband signal recycling scheme which gives potential solution to approaching this lower bound by converting the signal recycling cavity to be a broadband signal amplifier using an active optomechanical filter. We will show the difference and advantage of such a scheme compared with the previous white light cavity scheme using the optomechanical filter in [Phys.Rev.Lett.115.211104 (2015)]. The drawback is that the new scheme is more susceptible to the thermal noise of the mechanical oscillator.

gr-qc↗

The Development and Deployment of a Model for Hospital-level COVID-19 Associated Patient Demand Intervals from Consistent Estimators (DICE)

Hospitals commonly project demand for their services by combining their historical share of regional demand with forecasts of total regional demand. Hospital-specific forecasts of demand that provide prediction intervals, rather than point estimates, may facilitate better managerial decisions, especially when demand overage and underage are associated with high, asymmetric costs. Regional forecasts of patient demand are commonly available as a Poisson random variable, e.g., for the number of people requiring hospitalization due to an epidemic such as COVID-19. However, even in this common setting, no probabilistic, consistent, computationally tractable forecast is available for the fraction of patients in a region that a particular institution should expect. We introduce such a forecast, DICE (Demand Intervals from Consistent Estimators). We describe its development and deployment at an academic medical center in California during the `second wave' of COVID-19 in the Unite States. We show that DICE is consistent under mild assumptions and suitable for use with perfect, biased, unbiased regional forecasts. We evaluate its performance on empirical data from a large academic medical center as well as on synthetic data.

stat.AP↗

Towards observing the neutron star collapse with gravitational wave detectors

Gravitational waves from binary neutron star inspirals have been detected along with the electromagnetic transients coming from the aftermath of the merger in GW170817. However, much is still unknown about the post-merger dynamics that connects these two sets of observables. This includes if, and when, the post-merger remnant star collapses to a black hole, and what are the necessary conditions to power a short gamma-ray burst, and other observed electromagnetic counterparts. Observing the collapse of the post-merger neutron star would shed led on these questions, constraining models for the short gamma-ray burst engine and the hot neutron star equation of state. In this work, we explore the scope of using gravitational wave detectors to measure the timing of the collapse either indirectly, by establishing the shut-off of the post-merger gravitational emission, or---more challengingly---directly, by detecting the collapse signal. For the indirect approach, we consider a kilohertz high-frequency detector design that utilises a previously studied coupled arm cavity and signal recycling cavity resonance. This design would give a signal-to-noise ratio of 0.5\,-\,8.6 (depending on the variation of waveform parameters) for a collapse gravitational wave signal occurring at 10\,ms post-merger of a binary at 50\,Mpc and with total mass $2.7 M_\odot$. For the direct approach, we propose a narrow-band detector design, utilising the sensitivity around the frequency of the arm cavity free spectral range. The proposed detector achieves a signal-to-noise ratio of 0.3\,-\,1.9, independent of the collapse time. This detector is limited by both the fundamental classical and quantum noise with the arm cavity power chosen as 10\,MW.

gr-qc↗

Feasibility study of beam-expanding telescopes in the interferometer arms for the Einstein Telescope

The optical design of the Einstein Telescope (ET) is based on a dual-recycled Michelson interferometer with Fabry-Perot cavities in the arms. ET will be constructed in a new infrastructure, allowing us to consider different technical implementations beyond the constraints of the current facilities. In this paper we investigate the feasibility of using beam-expander telescopes in the interferometer arms. We provide an example implementation that matches the optical layout as presented in the ET design update 2020. We further show that the beam-expander telescopes can be tuned to compensate for mode mismatches between the arm cavities and the rest of the interferometer.

astro-ph.IM↗

Phase retrieval of complex-valued objects via a randomized Kaczmarz method

This paper investigates the convergence of the randomized Kaczmarz algorithm for the problem of phase retrieval of complex-valued objects. While this algorithm has been studied for the real-valued case}, its generalization to the complex-valued case is nontrivial and has been left as a conjecture. This paper establishes the connection between the convergence of the algorithm and the convexity of an objective function. Based on the connection, it demonstrates that when the sensing vectors are sampled uniformly from a unit sphere and the number of sensing vectors $m$ satisfies $m>O(n\log n)$ as $n, m\rightarrow\infty$, then this algorithm with a good initialization achieves linear convergence to the solution with high probability.

cs.IT↗

Extremely High Thermal Conductivity of Aligned Polyacetylene Predicted using First-Principles-Informed United-Atom Force Field

Molecular simulations of polymer rely on accurate force fields to describe the inter-atomic interactions. In this work, we use first-principles density functional theory (DFT) calculations to parameterize a united-atom force field for polyacetylene (PA), a conjugated polymer potentially of high thermal conductivity. Different electron correlation functionals in DFT have been tested. Bonding interactions for the alternating single and double bonds in the conjugated polymer backbone are explicitly described and Class II anharmonic functions are separately parameterized. Bond angle and dihedral interactions are also anharmonic and parameterized against DFT energy surfaces. The established force field is then used in molecular dynamics (MD) simulations to calculate the thermal conductivity of single PA chains and PA crystals with different simulation domain lengths. It is found that the thermal conductivity values of both PA single chains and crystals are very high and are length-dependent. At 790 nm, their respective thermal conductivity values are ~480 Wm-1K-1 and ~320 Wm-1K-1, which are comparatively higher than those of polyethylene (PE), the most thermally conductive polymer fiber measured up-to-date.

cond-mat.mtrl-sci↗

Faces à la Carte: Text-to-Face Generation via Attribute Disentanglement

Text-to-Face (TTF) synthesis is a challenging task with great potential for diverse computer vision applications. Compared to Text-to-Image (TTI) synthesis tasks, the textual description of faces can be much more complicated and detailed due to the variety of facial attributes and the parsing of high dimensional abstract natural language. In this paper, we propose a Text-to-Face model that not only produces images in high resolution (1024x1024) with text-to-image consistency, but also outputs multiple diverse faces to cover a wide range of unspecified facial features in a natural way. By fine-tuning the multi-label classifier and image encoder, our model obtains the vectors and image embeddings which are used to transform the input noise vector sampled from the normal distribution. Afterwards, the transformed noise vector is fed into a pre-trained high-resolution image generator to produce a set of faces with the desired facial attributes. We refer to our model as TTF-HD. Experimental results show that TTF-HD generates high-quality faces with state-of-the-art performance.

cs.CV↗

Applications of BERT Based Sequence Tagging Models on Chinese Medical Text Attributes Extraction

We convert the Chinese medical text attributes extraction task into a sequence tagging or machine reading comprehension task. Based on BERT pre-trained models, we have not only tried the widely used LSTM-CRF sequence tagging model, but also other sequence models, such as CNN, UCNN, WaveNet, SelfAttention, etc, which reaches similar performance as LSTM+CRF. This sheds a light on the traditional sequence tagging models. Since the aspect of emphasis for different sequence tagging models varies substantially, ensembling these models adds diversity to the final system. By doing so, our system achieves good performance on the task of Chinese medical text attributes extraction (subtask 2 of CCKS 2019 task 1).

cs.CL↗

Review: Progress on 2D topological insulators and potential ap-plications in electronic devices

Two-dimensional topological insulators (2DTI) have attracted increasing attention during the past few years. New 2DTI with increasing larger spin-orbit coupling (SOC) gaps have been predicted by theoretical calculations and some of them have been synthesized experimentally. In this review, the 2DTI, ranging from single element graphene-like materials to bi-elemental TMDs and to multi-elemental materials, with different thicknesses, structures and phases, have been summarized and discussed. The topological properties (especially the quantum spin Hall effect and Dirac fermion feature) and potential applications have been summarized. This review also points out the challenge and opportuni-ties for future 2DTI study, especially on the device applications based on the topological properties.

cond-mat.mes-hall↗