arXiv subjects

Wen Chen

Publications and source records attributed to Wen Chen.

At least 433 records · Page 24Linked to original sources

arXiv2020

Compute-and-Forward Network Coding Design over Multi-Source Multi-Relay Channels

Network coding is a new and promising paradigm for modern communication networks by allowing intermediate nodes to mix messages received from multiple sources. Compute-and-forward strategy is one category of network coding in which a relay will decode and forward a linear combination of source messages according to the observed channel coefficients, based on the algebraic structure of lattice codes. The destination will recover all transmitted messages if enough linear equations are received. In this work, we design in a system level, the compute-and-forward network coding coefficients by Fincke-Pohst based candidate set searching algorithm and network coding system matrix constructing algorithm, such that by those proposed algorithms, the transmission rate of the multi-source multi-relay system is maximized. Numerical results demonstrate the effectiveness of our proposed algorithms.

eess.SP↗

arXiv2020

Position Based Compressed Channel Estimation and Pilot Design for High Mobility OFDM Systems

With the development of high speed trains (HST) in many countries, providing broadband wireless services in HSTs is becoming crucial. Orthogonal frequency-division multiplexing (OFDM) has been widely adopted for broadband wireless communications due to its high spectral efficiency. However, OFDM is sensitive to the time selectivity caused by high-mobility channels, which costs large spectrum or time resources to obtain the accurate channel state information (CSI). Therefore, the channel estimation in high-mobility OFDM systems has been a long-standing challenge. In this paper, we first propose a new position-based high-mobility channel model,in which the HST's position information and Doppler shift are utilized to determine the positions of the dominant channel coefficients. %In this way, we can reduce the estimation complexity and to design the transmitted pilot.Then, we propose a joint pilot placement and pilot symbol design algorithm for compressed channel estimation. It aims to reduce the coherence between the pilot signal and the proposed channel model, and hence can improve the channel estimation accuracy. Simulation results demonstrate that the proposed method achieves better performances than existing channel estimation methods over high-mobility channels. Furthermore, we give an example of the designed pilot codebook to show the practical applicability of the proposed scheme.

eess.SP↗

arXiv2020

Position-Based Interference Elimination for High Mobility OFDM Channel Estimation in Multi-cell Systems

Orthogonal frequency-division multiplexing (OFD-M) and multi-cell architecture are widely adopted in current high speed train (HST) systems for providing high data rate wireless communications. In this paper, a typical multi-antenna OFDM HST communication system with multi-cell architecture is considered, where the inter-carrier interference (ICI) caused by high mobility and multi-cell interference (MCI) are both taken into consideration. By exploiting the train position information, a new position-based interference elimination method is proposed to eliminate both the MCI and ICI for a general basis expansion model (BEM). We show that the MCI and ICI can be completely eliminated by the proposed method to get the ICI-free pilots at each receive antenna. In addition, for the considered multi-cell HST system, we develop a low-complexity compressed channel estimation method and consider the optimal pilot pattern design. Both the proposed interference elimination method and the optimal pilot pattern are robust to the train speed and position,as well as the multi-cell multi-antenna system. Simulation results demonstrate the benefits and robustness of the proposed method in the multi-cell HST system.

eess.SP↗

arXiv2020

Optimal Binary/Quaternary Adaptive Signature Design for Code-Division Multiplexing

We consider signature waveform design for synchronous code division multiplexing in the presence of interference and wireless multipath fading channels. The adaptive real/complex signature that maximizes the signal-to-interference-plus-noise ratio (SINR) at the output of the maximum-SINR filter is the minimum-eigenvalue eigenvector of the disturbance autocovariance matrix. In digital communication systems, the signature alphabet is finite and digital signature optimization is NP-hard. In this paper, first we convert the maximum-SINR objective of adaptive binary signature design into an equivalent minimization problem. Then we present an adaptive binary signature design algorithm based on modified Fincke-Pohst (FP) method that achieves the optimal exhaustive search performance with low complexity. In addition, with the derivation of quaternary-binary equivalence, we extend and propose the optimal adaptive signature design algorithm for quaternary alphabet. Numerical results demonstrate the optimality and complexity reduction of our proposed algorithms.

eess.SP↗

arXiv2020

Integer-Forcing Linear Receiver Design with Slowest Descent Method

Compute-and-forward (CPF) strategy is one category of network coding in which a relay will compute and forward a linear combination of source messages according to the observed channel coefficients, based on the algebraic structure of lattice codes. Recently, based on the idea of CPF, integer forcing (IF) linear receiver architecture for MIMO system has been proposed to recover different integer combinations of lattice codewords for further original message detection. In this paper, we consider the problem of IF linear receiver design with respect to the channel conditions. Instead of exhaustive search, we present practical and efficient suboptimal algorithms to design the IF coefficient matrix with full rank such that the total achievable rate is maximized, based on the slowest descent method. Numerical results demonstrate the effectiveness of our proposed algorithms.

eess.SP↗

arXiv2020

Optimal Upward Scaling of Minimum-TSC Binary Signature Sets

We consider upward scaling an overloaded min-TSC binary signature set and propose an optimal solution based on improved sphere decoding algorithm. Instead of previous suboptimal approach, we are guaranteed to find the optimal maximum-likelihood (ML) searching result with low complexity.

eess.SP↗

arXiv2020

Joint Optimization of User Association, Subchannel Allocation, and Power Allocation in Multi-cell Multi-association OFDMA Heterogeneous Networks

Heterogeneous network is a novel network architecture proposed in Long-Term-Evolution~(LTE), which highly increases the capacity and coverage compared with the conventional networks. However, in order to provide the best services, appropriate resource management must be applied. In this paper, we consider the joint optimization problem of user association, subchannel allocation, and power allocation for downlink transmission in Multi-cell Multi-association Orthogonal Frequency Division Multiple Access (OFDMA) heterogeneous networks. To solve the optimization problem, we first divide it into two subproblems: 1) user association and subchannel allocation for fixed power allocation; 2) power allocation for fixed user association and subchannel allocation. Subsequently, we obtain a locally optimal solution for the joint optimization problem by solving these two subproblems alternately. For the first subproblem, we derive the globally optimal solution based on graph theory. For the second subproblem, we obtain a Karush-Kuhn-Tucker (KKT) optimal solution by a low complexity algorithm based on the difference of two convex functions approximation (DCA) method. In addition, the multi-antenna receiver case and the proportional fairness case are also discussed. Simulation results demonstrate that the proposed algorithms can significantly enhance the overall network throughput.

eess.SP↗

arXiv2020

Energy-Efficient Buffer-Aided Relaying Systems with Opportunistic Spectrum Access

In this paper, an energy-efficient cross-layer design framework is proposed for cooperative relaying networks, which takes into account the influence of spectrum utilization probability. Specifically, random arrival traffic is considered and an adaptive modulation and coding (AMC) scheme is adopted in the cooperative transmission system to improve the system performance. The average packet dropping rate of the relay-buffer is studied at first. With the packet dropping rate and stationary distribution of the system state, the closed-form expression of the delay is derived. Then the energy efficiency for relay-assisted transmission is investigated, which takes into account the queueing process of the relay and the source. In this context, an energy efficiency optimization problem is formulated to determine the optimum strategy of power and time allocation for the relay-assisted cooperative system. Finally, the energy efficient switching strategy between the relay assisted transmission and the direct transmission is obtained, where packet transmissions have different delay requirements. In addition, energy efficient transmission policy with AMC is obtained. Numerical results demonstrate the effectiveness of the proposed design improving the energy efficiency.

eess.SP↗

arXiv2020

Towrad 5G Air Interface Technology: Sparse Code Muliple Access

The fifth generation wireless networks focus on the design of low latency, high data rate, high reliability, and massive connectivity communications. Non-orthogonal multiple access (NOMA) is an essential enabling technology to accommodate the wide range of communication requirements. By coordinating the massive devices within the same resource block on power domain, frequency domain or code domain, NOMA is superior to conventional orthogonal multiple access in terms of the network connectivity, the throughputs of system and etc. Sparse code multiple access (SCMA) is a kind of multi-carrier code domain NOMA and has been studied extensively. The challenges for designing a high quality SCMA system is to seek the feasible encoding and decoding schemes to meet the desired requirements. In this article, we present some recent progresses towards the design of multi-dimensional codebooks, the practical low complexity decoder, as well as the Grant-Free multiple access for SCMA system. In particular, we show how the SCMA codebooks construction are motived by the combined design of multi-dimensional constellation and factor graphs. In addition, various low complexity SCMA decoders are also reviewed with a special focus on sphere decoding. Moreover, based on the framework of belief propagation, the SCMA Grant-Free transmission is introduced and the problem of collision resolution is also discussed.

eess.SP↗

arXiv2020

Low Complexity Iterative Receiver Design for Sparse Code Multiple Access

Sparse code multiple access (SCMA) is one of the most promising methods among all the non-orthogonal multiple access techniques in the future 5G communication. Compared with some other non-orthogonal multiple access techniques such as low density signature (LDS), SCMA can achieve better performance due to the shaping gain of the SCMA codewords. However, despite of the sparsity of the codewords, the decoding complexity of the current message passing algorithm (MPA) utilized by SCMA is still prohibitively high. In this paper, by exploring the lattice structure of SCMA codewords, we propose a low complexity decoding algorithm based on list sphere decoding (LSD). The LSD avoids the exhaustive search for all possible hypotheses and only considers signal within a hypersphere. As LSD can be viewed a depth-first tree search algorithm, we further propose several methods to prune the redundancy visited nodes in order to reduce the size of the search tree. Simulation results show that the proposed algorithm can reduce the decoding complexity substantially while the performance loss compared with the existing algorithm is negligible.

eess.SP↗

arXiv2020

Reduction of Feynman Integrals in the Parametric Representation

In this paper, the reduction of Feynman integrals in the parametric representation is considered. This method proves to be more efficient than the integration-by-part (IBP) method in the momentum space. Tensor integrals can directly be parametrized without performing tensor reductions. The integrands of parametric integrals are functions of Lorentz scalars, instead of four momenta. The complexity of a calculation is determined by the number of propagators that are present rather than the number of all the linearly independent propagators. Furthermore, the symmetries of Feynman integrals under permutations of indices are transparent in the parametric representation. Since all the indices of the propagators are nonnegative, an algorithm to solve those identities can easily be developed, which can be used for automatic calculations.

hep-ph↗

arXiv2020

Relativistic corrections to exclusive $χ_{cJ} + γ$ production from $e^+ e^-$ annihilation

We calculate in the non-relativistic QCD (NRQCD) factorization framework all leading relativistic corrections to the exclusive production of $χ_{cJ}+γ$ in $e^+ e^-$ annihilation. In particular, we compute for the first time contributions induced by octet operators with a chromoelectric field. The matching coefficients multiplying production long distance matrix elements (LDMEs) are determined through perturbative matching between QCD and NRQCD at the amplitude level. Technical challenges encountered in the non-relativistic expansion of the QCD amplitudes are discussed in detail. The main source of uncertainty comes from the not so well known LDMEs. Accounting for it, we provide the following estimates for the production cross sections at $\sqrt{s} = 10.6\textrm{ GeV}$: $σ(e^+ e^- \to χ_{ c0} + γ) = (1.3 \pm 0.4) \textrm{ fb}$, $σ(e^+ e^- \to χ_{ c1} + γ) = (15.4 \pm 6.7) \textrm{ fb}$, and $σ(e^+ e^- \to χ_{ c2} + γ) = (4.7 \pm 2.6) \textrm{ fb}$.

hep-ph↗

arXiv2019

Automatic Layout Generation with Applications in Machine Learning Engine Evaluation

Machine learning-based lithography hotspot detection has been deeply studied recently, from varies feature extraction techniques to efficient learning models. It has been observed that such machine learning-based frameworks are providing satisfactory metal layer hotspot prediction results on known public metal layer benchmarks. In this work, we seek to evaluate how these machine learning-based hotspot detectors generalize to complicated patterns. We first introduce a automatic layout generation tool that can synthesize varies layout patterns given a set of design rules. The tool currently supports both metal layer and via layer generation. As a case study, we conduct hotspot detection on the generated via layer layouts with representative machine learning-based hotspot detectors, which shows that continuous study on model robustness and generality is necessary to prototype and integrate the learning engines in DFM flows. The source code of the layout generation tool will be available at https://github. com/phdyang007/layout-generation.

cs.LG↗

arXiv2019

Modelling and Dynamic Tracking Control of Industrial Vehicles with Tractor-trailer Structure

Existing works on control of tractor-trailers systems only consider the kinematics model without taking dynamics into account. Also, most of them treat the issue as a pure control theory problem whose solutions are difficult to implement. This paper presents a trajectory tracking control approach for a full-scale industrial tractor-trailers vehicle composed of a car-like tractor and arbitrary number of passive full trailers. To deal with dynamic effects of trailing units, a force sensor is innovatively installed at the connection between the tractor and the first trailer to measure the forces acting on the tractor. The tractor's dynamic model that explicitly accounts for the measured forces is derived. A tracking controller that compensates the pulling/pushing forces in real time and simultaneously drives the system onto desired trajectories is proposed. The propulsion map between throttle opening and the propulsion force is proposed to be modeled with a fifth-order polynomial. The parameters are estimated by fitting experimental data, in order to provide accurate driving force. Stability of the control algorithm is rigorously proved by Lyapunov methods. Experiments of full-size vehicles are conducted to validate the performance of the control approach.

eess.SY↗

arXiv2019

On the Fundamental Limits of MIMO Massive Access Communication

The multiple access channel (MAC) with many-user is a general model for massive machine type communications. In this paradigm, the number of users may be comparable or even larger than the coding blocklength $n$. In contrast, classical MAC often assumes fixed and small number of the users. In this paper, we consider the massive access channel with multiple antennas system, where the base station (BS) with multiple receiving antennas serves the users in a single cell. The magnitude of users is assumed to grow unbounded with $n$. We investigate the achievable region of MIMO massive access channel, where among the total users, an unknown subset referred to active users may transmit data periodically. The asymptotic active user identification cost is also quantified. With the theoretical analysis, it was shown that given finite number of the receiving antennas, the individual rate for each user can be formulated as the sum rate multiplied by some specific factors, which correspond to the allocation of sum capacity. The successive decoding does not apply due to the interferences from growing unbounded users. Theoretical analysis shows that successive decoding works only when the number of receiving antennas goes to infinity with the increasing codelength.

cs.IT↗

arXiv2019

Observations of radio sources near the Sun

Geodetic Very Long Baseline Interferometry (VLBI) data are capable of measuring the light deflection caused by the gravitational field of the Sun and large planets with high accuracy. The parameter $γ$ of the parametrized Post-Newtonian (PPN) formalism estimated using observations of reference radio sources near the Sun should be equal to unity in the general relativity. We have run several VLBI experiments tracking reference radio sources from 1 to 3 degrees from the Sun. The best formal accuracy of the parameter $γ$ achieved in the single-session mode is less than 0.01 percent, or better than the formal accuracy obtained with a global solution included all available observations at arbitrary elongation from the Sun. We are planning more experiments starting from 2020 using better observing conditions near the minimum of the Solar activity cycle.

astro-ph.IM↗

arXiv2019

A new data fitting method for stretched Gaussian noise: stretched least square method

Stretched Gaussian distribution is the fundamental solution of the Hausdorff derivative diffusion equation and its corresponding stretched Gaussian noise is a widely encountered non-Gaussian noise in science and engineering. The least square method is a standard regression approach to fit Gaussian noisy data, but has distinct limits for non-Gaussian noise. Based on the Hausdorff calculus, this study develops a stretched least square method to fit stretched Gaussian noise by using the Hausdorff fractal distance as the horizontal coordinate. To better compare with the least square method, different high levels of stretched Gaussian noise are added to real values. Numerical experiments show the stretched least square method is more accurate specific in fitting stretched Gaussian noise than the least square method.

math.NA↗

arXiv2019

POG: Personalized Outfit Generation for Fashion Recommendation at Alibaba iFashion

Increasing demand for fashion recommendation raises a lot of challenges for online shopping platforms and fashion communities. In particular, there exist two requirements for fashion outfit recommendation: the Compatibility of the generated fashion outfits, and the Personalization in the recommendation process. In this paper, we demonstrate these two requirements can be satisfied via building a bridge between outfit generation and recommendation. Through large data analysis, we observe that people have similar tastes in individual items and outfits. Therefore, we propose a Personalized Outfit Generation (POG) model, which connects user preferences regarding individual items and outfits with Transformer architecture. Extensive offline and online experiments provide strong quantitative evidence that our method outperforms alternative methods regarding both compatibility and personalization metrics. Furthermore, we deploy POG on a platform named Dida in Alibaba to generate personalized outfits for the users of the online application iFashion. This work represents a first step towards an industrial-scale fashion outfit generation and recommendation solution, which goes beyond generating outfits based on explicit queries, or merely recommending from existing outfit pools. As part of this work, we release a large-scale dataset consisting of 1.01 million outfits with rich context information, and 0.28 billion user click actions from 3.57 million users. To the best of our knowledge, this dataset is the largest, publicly available, fashion related dataset, and the first to provide user behaviors relating to both outfits and fashion items.

cs.IR↗