arXiv subjects

Wen Chen

Publications and source records attributed to Wen Chen.

At least 145 records · Page 8Linked to original sources

arXiv2025

Joint Optimization for Multi-User Transmissive RIS-MIMO Systems

Transmissive reconfigurable intelligent surfaces (RIS) represent a transformative architecture for future wireless networks, enabling a paradigm shift from traditional costly base stations to low-cost, energy-efficient transmitters. This paper explores a downlink multi-user MIMO system where a transmissive RIS, illuminated by a single feed antenna, forms the core of the transmitter. The joint optimization of the RIS coefficient vector, power allocation, and receive beamforming in such a system is critical for performance but poses significant challenges due to the non-convex objective, coupled variables, and constant modulus constraints. To address these challenges, we propose a novel optimization framework. Our approach involves reformulating the sum-rate maximization problem into a tractable equivalent form and developing an efficient alternating optimization (AO) algorithm. This algorithm decomposes the problem into subproblems for the RIS coefficients, receive beamformers, and power allocation, each solved using advanced techniques including convex approximation and difference-of-convex programming. Simulation results demonstrate that our proposed method converges rapidly and achieves substantial sum-rate gains over conventional schemes, validating the effectiveness of our approach and highlighting the potential of transmissive RIS as a key technology for next-generation wireless systems.

cs.IT↗

arXiv2025

Reconfigurable Airspace: Synergizing Movable Antenna and Intelligent Surface for Low-Altitude ISAC Networks

Low-altitude unmanned aerial vehicle (UAV) networks are integral to future 6G integrated sensing and communication (ISAC) systems. However, their deployment is hindered by challenges stemming from high mobility of UAVs, complex propagation environments, and the inherent trade-offs between coexisting sensing and communication functions. This article proposes a novel framework that leverages movable antennas (MAs) and intelligent reflecting surfaces (IRSs) as dual enablers to overcome these limitations. MAs, through active transceiver reconfiguration, and IRSs, via passive channel reconstruction, can work in synergy to significantly enhance system performance. Our analysis first elaborates on the fundamental gains offered by MAs and IRSs, and provides simulation results that validate the immense potential of the MA-IRS-enabled ISAC architecture. Two core UAV deployment scenarios are then investigated: (i) UAVs as ISAC users, where we focus on achieving high-precision tracking and aerial safety, and (ii) UAVs as aerial network nodes, where we address robust design and complex coupled resource optimization. Finally, key technical challenges and research opportunities are identified and analyzed for each scenario, charting a clear course for the future design of advanced low-altitude ISAC networks.

cs.IT↗

arXiv2025

Phase transitions of eutectic high entropy alloy AlCoCrFeNi2.1 under shock compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM-EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM-EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. We present dynamic compression experiments and molecular dynamics simulations studying the structural evolution of AM-EHEA AlCoCrFeNi2.1 when compressed to pressures up to 400 GPa. Our in-situ X-ray diffraction measurements capture the appearance of fcc and bcc phases at different pressure conditions, with pure- and mixed-phase regions. Understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

cond-mat.mtrl-sci↗

arXiv2025

Joint Space Time Coding on RIS for Simultaneous Direct Modulation and Beamforming

Reconfigurable Intelligent Surface (RIS)-based direct modulation communication systems have garnered significant attention due to their low cost, low power consumption, and baseband-less characteristics. However, these systems face challenges such as the random time-varying coding state of the RIS and the difficulty in implementing beamforming in direct modulation. In this paper, we propose a simple and effective joint space-time coding approach for RIS that enables simultaneous realization of both direct modulation communication and beamforming. By modeling the transmitted signals of the RIS using space-time coding, we show that the time coding determines the direct modulation functionality, while the space coding governs the beamforming. Consequently, we introduce a joint time-space coding technique by performing exclusive-or (XOR) operations on the time and space coding sequences, enabling both functionalities to be achieved concurrently. Numerical simulations demonstrate the effectiveness of the proposed method. Furthermore, we design and fabricate a transmissive 1-bit phase reconfigurable RIS operating in the 3.4~3.79 GHz frequency band for the implementation of a direct modulation communication system. Experimental results reveal that the bit error rate (BER) is significantly reduced when joint space-time coding is used, compared to using time coding alone. Additionally, the root-mean-square error vector magnitude (rmsEVM) of the constellation diagram is reduced by 55%. This technique is promising for applications in the Internet of Things (IoT), contributing to the development of intelligent networks for electronic devices.

cs.IT↗

arXiv2025

Joint Discrete Antenna Positioning and Beamforming Optimization in Movable Antenna Enabled Full-Duplex ISAC Networks

In this paper, we propose a full-duplex integrated sensing and communication (ISAC) system enabled by a movable antenna (MA). By leveraging the characteristic of MA that can increase the spatial diversity gain, the performance of the system can be enhanced. We formulate a problem of minimizing the total transmit power consumption via jointly optimizing the discrete position of MA elements, beamforming vectors, sensing signal covariance matrix and user transmit power. Given the significant coupling of optimization variables, the formulated problem presents a non-convex optimization challenge that poses difficulties for direct resolution. To address this challenging issue, the discrete binary particle swarm optimization (BPSO) algorithm framework is employed to solve the formulated problem. Specifically, the discrete positions of MA elements are first obtained by iteratively solving the fitness function. The difference-of-convex (DC) programming and successive convex approximation (SCA) are used to handle non-convex and rank-1 terms in the fitness function. Once the BPSO iteration is complete, the discrete positions of MA elements can be determined, and we can obtain the solutions for beamforming vectors, sensing signal covariance matrix and user transmit power. Numerical results demonstrate the superiority of the proposed system in reducing the total transmit power consumption compared with fixed antenna arrays.

eess.SP↗

arXiv2025

Movable Antennas Enabled ISAC Systems: Fundamentals, Opportunities, and Future Directions

The movable antenna (MA)-enabled integrated sensing and communication (ISAC) system attracts widespread attention as an innovative framework. The ISAC system integrates sensing and communication functions, achieving resource sharing across various domains, significantly enhancing communication and sensing performance, and promoting the intelligent interconnection of everything. Meanwhile, MA utilizes the spatial variations of wireless channels by dynamically adjusting the positions of MA elements at the transmitter and receiver to improve the channel and further enhance the performance of the ISAC systems. In this paper, we first outline the fundamental principles of MA and introduce the application scenarios of MA-enabled ISAC systems. Then, we summarize the advantages of MA-enabled ISAC systems in enhancing spectral efficiency, achieving flexible and precise beamforming, and making the signal coverage range adjustable. Besides, a specific case is studied to show the performance gains in terms of transmit power that MA brings to ISAC systems. Finally, we discuss the challenges of MA-enabled ISAC and future research directions, aiming to provide insights for future research on MA-enabled ISAC systems.

eess.SP↗

arXiv2025

Analysis and Algorithm for Multi IRS Collaborative Localization via Hybrid Time Angle Estimation

This paper proposes a novel multiple intelligent reflecting surfaces (IRSs) collaborative hybrid localization system, which involves deploying multiple IRSs near the target area and achieving target localization through joint time delay and angle estimation. Specifically, echo signals from all reflective elements are received by each sensor and jointly processed to estimate the time delay and angle parameters. Based on the above model, we derive the Fisher Information Matrix (FIM) for cascaded delay, Angle of Arrival (AOA), and Angle of Departure (AOD) estimation in semi passive passive models, along with the corresponding Cramer Rao Bound (CRB). To achieve precise estimation close to the CRB, we design efficient algorithms for angle and location estimation. For angle estimation, reflective signals are categorized into three cases based on their rank, with different signal preprocessing. By constructing an atomic norm set and minimizing the atomic norm, the joint angle estimation problem is transformed into a convex optimization problem, and low-complexity estimation of multiple AOA and AOD pairs is achieved using the Alternating Direction Method of Multipliers (ADMM). For location estimation, we propose a three-stage localization algorithm that combines weighted least squares, total least squares, and quadratic correction to handle errors in the coefficient matrix and observation vector, thus improving accuracy. Numerical simulations validate the superiority of the proposed system, demonstrating that the system's collaboration, hybrid localization, and distributed deployment provide substantial benefits, as well as the accuracy of the proposed estimation algorithms, particularly in low signal to noise ratio (SNR) condition.

eess.SP↗

arXiv2025

Design and Analysis of Phase Conjugation-Based Self-Alignment Beamforming for RIS-Assisted Terahertz SWIPT

Terahertz (THz) simultaneous wireless information and power transfer (SWIPT) is a promising technology for enabling ultra-high-rate and low-latency communications in massive battery-free Internet of Things (IoT) deployments for 6G networks. However, conventional THz systems rely on narrow directional beams that necessitate precise alignment, typically achieved through high-overhead beam scanning procedures, which fundamentally at odds with the energy constraints of battery-free IoT devices. In this paper, we propose a novel self-alignment architecture for THz SWIPT leveraging a reconfigurable intelligent surface (RIS) to eliminate complex beam scanning. By integrating phase conjugate circuits at both the base station and user equipment, the RIS facilitates a resonance-based bidirectional retro-reflection mechanism, enabling the system to autonomously converge to an aligned state without manual intervention. We develop an analytical channel transfer model and a power cycle model to characterize the resonance-assisted beam alignment process and power transfer efficiency. Simulation results demonstrate that the RIS-enabled system achieves effective spatial power concentration with significant sidelobe suppression, leading to a communication capacity of 127.84 Gbit/s and a received power of 13.62 mW over a 2.2-meter link.

eess.SP↗

arXiv2025

Virtual-Real Collaborated Split Learning via Model Partitioning in IRS-Assisted IoT Networks

This paper investigates a novel computation and communication co-design framework for large-scale split learning in intelligent reflecting surface (IRS)-assisted internet of things (IoT) networks integrated with digital twin (DT) technique. The considered system consists of a multi-antenna access point (AP), multiple heterogeneous user devices (UDs), and an deployed IRS to enhance both uplink and downlink transmission. The training process of a deep neural network is partitioned between devices and the AP, where a DT replica is activated to replace UDs with insufficient local computation capabilities. We formulate a delay-optimal split learning problem, which optimizes five key variables: layer partitioning points, DT assignment decisions, IRS phase shift matrix, AP downlink power allocation, and DT frequency adjustment, aiming to minimize the overall end-to-end delay under communication and computation. The proposed optimization problem is a highly coupled non-convex mixed-integer problem. Therefore, we solve using an alternating optimization approach combining closed-form updates, semidefinite relaxation (SDR), and low-complexity heuristics. Extensive simulations demonstrate that the proposed scheme significantly reduces training delay compared to conventional baselines and achieves up to 35\% delay improvement, especially under high UD density and stringent power constraints.

eess.SP↗

arXiv2025

Efficient Spectral Efficiency Maximization Design for IRS-aided MIMO Systems

Driven by the growing demand for higher spectral efficiency in wireless communications, intelligent reflecting surfaces (IRS) have attracted considerable attention for their ability to dynamically reconfigure the propagation environment. This work addresses the spectral efficiency maximization problem in IRS-assisted multiple-input multiple-output (MIMO) systems, which involves the joint optimization of the transmit precoding matrix and the IRS phase shift configuration. This problem is inherently challenging due to its non-convex nature. To tackle it effectively, we introduce a computationally efficient algorithm, termed ADMM-APG, which integrates the alternating direction method of multipliers (ADMM) with the accelerated projected gradient (APG) method. The proposed framework decomposes the original problem into tractable subproblems, each admitting a closed-form solution while maintaining low computational complexity. Simulation results demonstrate that the ADMM-APG algorithm consistently surpasses existing benchmark methods in terms of spectral efficiency and computational complexity, achieving significant performance gains across a range of system configurations.

cs.IT↗

arXiv2025

Joint Spatial Registration and Resource Allocation for Transmissive RIS Enabled Cooperative ISCC Networks

In this paper, we propose a novel transmissive reconfigurable intelligent surface (TRIS) transceiver-driven cooperative integrated sensing, computing, and communication (ISCC) network to meet the requirement for a diverse network with low energy consumption. The cooperative base stations (BSs) are equipped with TRIS transceivers to accomplish sensing data acquisition, communication offloading, and computation in a time slot. In order to obtain higher cooperation gain, we utilize a signal-level spatial registration algorithm, which is realized by adjusting the beamwidth. Meanwhile, for more efficient offloading of the computational task, multistream communication is considered, and rank-$N$ constraints are introduced, which are handled using an iterative rank minimization (IRM) scheme. We construct an optimization problem with the objective function of minimizing the total energy consumption of the network to jointly optimize the beamforming matrix, time slot allocation, sensing data allocation and sensing beam scheduling variables. Due to the coupling of the variables, the proposed problem is a non-convex optimization problem, which we decouple and solve using a block coordinate descent (BCD) scheme. Finally, numerical simulation results confirm the superiority of the proposed scheme in improving the overall network performance and reducing the total energy consumption of the network.

cs.IT↗

arXiv2025

Joint Beamforming Design and Resource Allocation for IRS-Assisted Full-Duplex Terahertz Systems

Intelligent reflecting surface (IRS)-assisted full-duplex (FD) terahertz (THz) communication systems have emerged as a promising paradigm to satisfy the escalating demand for ultra-high data rates and spectral efficiency in future wireless networks. However, the practical deployment of such systems presents unique technical challenges, stemming from severe propagation loss, frequency-dependent molecular absorption in the THz band, and the presence of strong residual self-interference (SI) inherent to FD communications. To tackle these issues, this paper proposes a joint resource allocation framework that aims to maximize the weighted minimum rate among all users, thereby ensuring fairness in quality of service. Specifically, the proposed design jointly optimizes IRS reflecting phase shifts, uplink/downlink transmit power control, sub-band bandwidth allocation, and sub-band assignment, explicitly capturing the unique propagation characteristics of THz channels and the impact of residual SI. To strike an balance between system performance and computational complexity, two computationally efficient algorithms are developed under distinct spectrum partitioning schemes: one assumes equal sub-band bandwidth allocation to facilliate tractable optimization, while the other introduces adaptive bandwidth allocation to further enhance spectral utilization and system flexibility. Simulation results validate the effectiveness of the proposed designs and demonstrate that the adopted scheme achieves significant spectral efficiency improvements over benchmark schemes.

cs.IT↗

arXiv2025

Learning-Based Blockage-Resilient Beam Training in Near-Field Terahertz Communications

Terahertz (THz) band is considered a promising candidate to meet the high-throughput requirement for future sixth-generation (6G) wireless communications due to its ultrawide bandwidth. However, due to the high penetration loss at high-frequencies, blockage becomes a serious problem in THz communications, especially in near-field indoor communications with numerous obstacles. To address this issue, this paper investigates blockage-resilient near-field beam training based on self-accelerating Airy beam, which can propagate along a curved trajectory to circumvent obstacles. Specifically, we first analyze the trajectory of the Airy beam and the beam pattern at the receiver using a discrete Fourier transform (DFT) codebook in the presence of obstacles. Interestingly, we reveal that the beam pattern not only captures the receiver's location information but also implicitly encodes the spatial relationship between the receiver and obstacle, which facilitates identifying the optimal Airy beam configuration. Based on this insight, we formulate the blockage-resilient beam training task as a multitask learning problem and propose a lightweight attention-based multi-parameter beam training network (AMPBT-Net) to jointly predict the angle, distance, and curvature parameters of the optimal Airy beam based on the beam pattern. Finally, simulation results demonstrate that the Airy beam effectively mitigates blockage effects and the proposed scheme achieves comparable performance to exhaustive beam sweeping while significantly reducing training overhead.

eess.SP↗

arXiv2025

Multifunctional Wideband Digital Metasurface for Secure Electromagnetic Manipulation in S-Band

Digital metasurfaces have attracted significant attention in recent years due to their ability to manipulate electromagnetic (EM) waves for secure sensing and communication. However, most reported metasurfaces operate at relatively high frequencies, primarily due to the constraints imposed by the physical scale of the dielectric substrate, thus limiting their full-wave system applications. In this work, a wideband digital reflective metasurface is presented for capable of dynamically controlling EM waves, with multifunctional applications in the lower-frequency S-band. The metasurface is composed of electronically reconfigurable meta-atoms with wideband characteristics, and designed by using trapezoidal and M-shaped patches connected by a pin diode. Simulation results show that the proposed digital metasurface could achieve wideband 1-bit phase quantization with a stable phase difference within 180 degree +/- 25 degree and small reflection loss below 0.6 dB from 2.72 to 3.25 GHz. To validate the proposed design, a 20x20-unit metasurface array was designed, simulated and fabricated. By dynamically adjusting the coding sequence, the metasurface could enable multi-mode orbital angular momentum (OAM) beam generation, dynamic beam scanning, and precise direction finding. These capabilities support secure sensing and secure communications through high-resolution target detection and anti-jamming beam steering, as well as physical-layer security. The proposed wideband metasurface may serve as an effective candidate for enhancing spectral efficiency and security performance in radar and wireless systems.

eess.SP↗

arXiv2025

Outage-Aware Sum Rate Maximization in Movable Antennas-Enabled Systems

In this paper, we investigate the movable antennas (MAs)-enabled multiple-input-single-output (MISO) systems, where the base station (BS) equipped with multiple MAs serves multiple single-antenna user. The delay-sensitive scenario is considered, where users refrain from periodically sending training signals to the BS for channel estimations to avoid additional latency. As a result, the BS relies solely on the statistical channel state information (CSI) to transmit data with a fixed rate. Under this setup, we aim to maximize the outage-aware sum rate of all users, by jointly optimizing antenna positions and the transmit beamforming at the BS, while satisfying the given target outage probability requirement at each user. The problem is highly non-convex, primarily because the exact cumulative distribution function (CDF) of the received signal-to-interference-plus-noise ratio (SINR) of each user is difficult to derive. To simplify analysis and without comprising performance, we adopt the statistical CSI based zero-forcing beamforming design. We then introduce one important lemma to derive the tight mean and variance of the SINR. Leveraging these results, we further exploit the Laguerre series approximation to successfully derive the closedform and tight CDF of the SINR. Subsequently, the outageaware sum rate expression is presented but still includes complex structure with respect to antenna positions. Facing this challenge, the projected gradient ascent (PGA) method is developed to iteratively update antenna positions until convergence. Numerical results demonstrate the effectiveness of our proposed schemes compared to conventional fixed-position antenna (FPA) and other competitive benchmarks.

cs.IT↗

arXiv2025

Movable Antenna Enhanced Networked Integrated Sensing and Communication System

Integrated sensing and communication (ISAC) is a key technology for future 6G networks. Most existing studies focus on monostatic and/or bistatic setups with limited coverage and capabilities. Networked ISAC systems with distributed base stations (BSs) can overcome these limitations. Moreover, movable antenna (MA) architectures offer improved ISAC performance over fixed-position antennas (FPAs) by enabling adaptable antenna movement. In this paper, we utilize the MA to promote communication capability with guaranteed sensing performance via jointly designing beamforming, power allocation, receiving filters and position configuration of transmit/receive MA towards maximizing the sum rate for both downlink (DL) and uplink (UL) users. The optimization problem is highly difficult due to the unique channel model derived from the position coefficient of the MA. To resolve this challenge, via leveraging the cutting-the-edge majorization-minimization (MM) method, we develop an efficient solution that optimizes all variables via convex optimization techniques. Extensive simulation results verify the effectiveness of our proposed algorithms and demonstrate the substantial performance promotion by deploying the MA framework in the networked ISAC system.

eess.SP↗

arXiv2025

Active IRS Assisted Joint Uplink and Downlink Communications

In this paper, we investigate an intelligent reflecting surface (IRS) aided wireless communication system, where active IRSs (AIRSs) are deployed to assist communication between a base station (BS) and users of both the uplink (UL) and downlink (DL). We aim to maximize the weighted sum rate (WSR) of UL and DL communications through joint optimization of BS, AIRS beamforming, and AIRS element allocation. First, we study three deployment schemes, namely distributed AIRSs, BS-side AIRS, and user-side AIRS. For distributed AIRSs, both optimal and near-optimal solutions are derived in closed form. To draw useful insights, we analytically compare the deployment schemes in terms of the rate performance under the single-user setup. For the multi-user case, we consider two beamforming setups at the distributed AIRSs to balance performance and complexity tradeoffs. Regarding the user-adaptive AIRS beamforming, different AIRS beamforming vectors are adopted for each user; while for the static AIRS beamforming, all users share the same beamforming vectors, with identical phase shifts but different amplitudes for UL and DL. With the user-adaptive AIRS beamforming, we focus on the optimization of element allocation for rate maximization. With static AIRS beamforming, we solve the rate maximization problem by optimizing the BS transmit/receive beamformers, user beamforming, and AIRS beamforming. Despite its non-convexity, we develop an efficient alternating optimization (AO) based algorithm that solves each sub-problem optimally. Numerical results validate the practical advantages of distributed AIRSs compared to passive IRS (PIRS), BS-side AIRS, and user-side AIRS, and highlight the benefits of dynamic IRS beamforming.

eess.SP↗

arXiv2025

Velocity and Density-Aware RRI Analysis and Optimization for AoI Minimization in IoV SPS

Addressing the problem of Age of Information (AoI) deterioration caused by packet collisions and vehicle speed-related channel uncertainties in Semi-Persistent Scheduling (SPS) for the Internet of Vehicles (IoV), this letter proposes an optimization approach based on Large Language Models (LLM) and Deep Deterministic Policy Gradient (DDPG). First, an AoI calculation model influenced by vehicle speed, vehicle density, and Resource Reservation Interval (RRI) is established, followed by the design of a dual-path optimization scheme. The DDPG is guided by the state space and reward function, while the LLM leverages contextual learning to generate optimal parameter configurations. Experimental results demonstrate that LLM can significantly reduce AoI after accumulating a small number of exemplars without requiring model training, whereas the DDPG method achieves more stable performance after training.

cs.LG↗