arXiv subjects

X. Buffat

Publications and source records attributed to X. Buffat.

14 recordsLinked to original sources

arXiv2024

Interim report for the International Muon Collider Collaboration (IMCC)

The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.

physics.acc-ph↗

arXiv2023

Xsuite: an integrated beam physics simulation framework

Xsuite is a newly developed modular simulation package combining in a single flexible and modern framework the capabilities of different tools developed at CERN in the past decades, notably Sixtrack, Sixtracklib, COMBI and PyHEADTAIL. The suite consists of a set of Python modules (Xobjects, Xpart, Xtrack, Xcoll, Xfields, Xdeps) that can be flexibly combined together and with other accelerator-specific and general-purpose python tools to study complex simulation scenarios. The code allows for symplectic modeling of the particle dynamics, combined with the effect of synchrotron radiation, impedances, feedbacks, space charge, electron cloud, beam-beam, beamstrahlung, and electron lenses. For collimation studies, beam-matter interaction is simulated using the K2 scattering model or interfacing Xsuite with the BDSIM/Geant4 library. Tools are available to compute the accelerator optics functions from the tracking model and to generate particle distributions matched to the optics. Different computing platforms are supported, including conventional CPUs, as well as GPUs from different vendors.

physics.acc-ph↗

arXiv2021

Beam Measurements and Machine Learning at the CERN Large Hadron Collider

This paper presents a review of the recent Machine Learning activities carried out on beam measurements performed at the CERN Large Hadron Collider. This paper has been accepted for publication in IEEE Instrumentation and Measurement Magazine and in the published version no abstract is provided.

physics.acc-ph↗

arXiv2020

Machine learning for beam dynamics studies at the CERN Large Hadron Collider

Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts deployed in this domain by several laboratories worldwide. This is also the case of CERN, where recently focused efforts have been devoted to the application of Machine Learning techniques to beam dynamics studies at the Large Hadron Collider (LHC). This implies a wide spectrum of applications from beam measurements and machine performance optimisation to analysis of numerical data from tracking simulations of non-linear beam dynamics. In this paper, the LHC-related applications that are currently pursued are presented and discussed in detail, paying also attention to future developments.

physics.acc-ph↗

arXiv2020

Imperfections and corrections

The measurement and correction of optics parameters has been a major concern since the advent of strong focusing synchrotron accelerators. A review of typical imperfections in accelerator optics together with measurement and correction algorithms is given with emphasis on numerical implementations. Python examples are shown using existing libraries when possible.

physics.acc-ph↗

arXiv2020

Computing techniques

This lecture aims at providing a user's perspective on the main concepts used nowadays for the implementation of numerical algorithm on common computing architecture. In particular, the concepts and applications of Central Processing Units (CPUs), vectorisation, multithreading, hyperthreading and Graphical Processing Units (GPUs), as well as computer clusters and grid computing will be discussed. Few examples of source codes illustrating the usage of these technologies are provided.

physics.acc-ph↗

arXiv2020

Proof-of-principle direct measurement of Landau damping strength at the Large Hadron Collider with an anti-damper

Landau damping is an essential mechanism for ensuring collective beam stability in particle accelerators. Precise knowledge of how strong Landau damping is, is key to making accurate predictions on beam stability for state-of-the-art high energy colliders. In this paper we demonstrate an experimental procedure that would allow quantifying the strength of Landau damping and the limits of beam stability using an active transverse feedback as a controllable source of beam coupling impedance. In a proof-of-principle test performed at the Large Hadron Collider stability diagrams for a range of Landau Octupole strengths have been measured. In the future, the procedure could become an accurate way of measuring stability diagrams throughout the machine cycle.

physics.acc-ph↗

arXiv2017

Machine Layout and Performance

Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.

physics.acc-ph↗

arXiv2014

Operational considerations on the stability of colliding beams

While well studied in the absence of beam-beam and while colliding head-on, the stability of the LHC beams can be very critical in intermediate steps. During the squeeze, the long-range beam-beam interaction becomes a critical component of the beam's dynamics. Also, while the transverse separation at the interaction points is collapsed, the beam-beam forces change drastically, possibly deteriorating the beam's stability. Finally, during luminosity production, the configuration of the LHC in 2012 included few bunches without head-on collision in any of the interaction points having different stability properties. Stability diagrams are being evaluated numerically in these configurations in an attempt to explain instabilities observed in these phases during the 2012 proton run of the LHC.

physics.acc-ph↗

arXiv2014

Beam-beam and impedance

As two counter-rotating beams interact they can give rise to coherent dipole modes. Under the influence of impedance these coherent beam-beam modes can couple to higher order head-tail modes and lead to strong instabilities. A fully self-consistent approach including beam-beam and impedance was used to characterize this new coupled mode instability and study possible cures such as a transverse damper and high chromaticity.

physics.acc-ph↗

arXiv2014

Coherent beam-beam mode in the LHC

Observations of single bunch beam-beam coherent modes during dedicated experiments in the LHC are presented. Their role in standard operation for physics is discussed and, in particular, candidates of beam-beam coherent mode driven unstable by the machine impedance are presented.

physics.acc-ph↗

arXiv2014

Stability diagram of colliding beams

The effect of the beam-beam interactions on the stability of impedance mode is discussed. The detuning is evaluated by the means of single particle tracking in arbitrarily complex collision configurations, including lattice non-linearities, and used to numerically evaluate the dispersion integral. This approach also allows the effect of non-Gaussian distributions to be considered. Distributions modified by the action of external noise are discussed.

physics.acc-ph↗

arXiv2014

Observations of beam-beam effects at the LHC

This paper introduces a list of observations related to the beam-beam interaction that were collected over the first years of LHC proton physics operation (2010-12). Beam-beam related effects not only have been extensively observed and recorded, but have also shaped the operation of the LHC for high-intensity proton running in a number of ways: the construction of the filling scheme, the choice of luminosity levelling techniques, measures to mitigate instabilities, and the choice of settings for improving performance (e.g. to reduce losses), among others.

physics.acc-ph↗

arXiv2014

Long Range Beam-beam Effects in the LHC

We report on the experience with long-range beam--beam effects in the LHC, in dedicated studies as well as the experience from operation. Where possible, we compare the observations with the expectations.

physics.acc-ph↗