Search arXiv⌕ Search

arXiv subjects

Yan Grasselli

Publications and source records attributed to Yan Grasselli.

7 recordsLinked to original sources

Viscoelastic behavior at high volume fraction of magnetorheological suspensions in the presence of discontinuous shear thickening

This paper presents a study of the viscoelastic behavior of suspensions of carbonyl iron particles coated with a superplastifier molecule and dispersed in ethylene glycol. The experiments were done in plate-plate configuration with the rheometer MCR502 of Anton Paar. The discontinuous shear thickening (DST) transition manifests by a large jump of the storage and loss modulus. For low magnetic fields ( H <___50___kA/m) the increase of moduli is at least of two orders of magnitude compared to the one induced by the magnetic field in the absence of DST. The behavior of the critical strain and the critical stress where the transition happens are presented for different frequencies and fields and a qualitative interpretation of the observed behavior is presented.

physics.flu-dyn↗

Enhancement of the magnetorheological effect using discontinuous shear thickening with a mixture of magnetic and non magnetic particles

The phenomenon of discontinuous shear thickening (DST) is observed in suspensions of solid particles with a very high-volume fraction. Using a suspension of magnetic particles at high-volume fraction we have, for the first time, demonstrated experimentally the presence of a frictional network of particles by a simultaneous measurement of the electrical resistance of the suspension and of the rheological curve. An obstacle for the applications of MRS remains the sedimentation and aggregation linked to the high density of the iron microparticles. We have recently found that a small fraction of ferromagnetic particles within a concentrated suspension of calcium carbonate particles is not only sufficient to trigger the transition by application of a magnetic field but also optimum for the amplitude of the jump in viscosity observed in DST. We shall explain this result from stress transmission between the magnetic particles and nonmagnetic ones, both inserted in the percolated network of particles. We will also highlight the role of the polyelectrolyte adsorbed on the surface of the particles in the DST transition through the balance between the repulsive entropic force between two layers of polymer adsorbed on different particles and the magnetic attraction force.

cond-mat.soft↗

Discontinuous Shear Thickening (DST) transition with spherical iron particles coated by adsorbed brush polymer

In this work we explore the rheology of very concentrated (0.55<$Φ$<0.67) suspensions of carbonyl iron (CI) particles coated by a small polymer. A strong DST is observed in a large range of volume fraction presenting some specificities relatively to other systems. In particular, in a given range of volume fraction, the DST transition appears suddenly without being preceded by shear thickening. The presence of a frictional network of particles is confirmed by a simultaneous measurement of the electric resistance of the suspension and of the rheological curve. Using the Wyart-Cates model we show that, increasing the volume fraction, the fraction of frictional contacts grows more and more quickly with the stress that disagrees with the prediction of computer simulations. The same kind of behavior is observed in the presence of a magnetic field with, in addition, a very strong increase of the viscosity with the magnetic field before the transition. We interpret this behavior by the interpenetration of the polymer layer under the effect of the shear stress-and of the magnetic stress-followed by the expulsion of the polymer out of the surfaces. Besides we point that, above the DST transition, we do not observe a jamming in the range of volume fraction whereas it is predicted by the W-C model. Based on the fact that in the absence of shear flow, the polymer should come back to the surface and destroy the frictional contacts we can predict an asymptotic non-zero shear rate and reproduce the experimental behavior.

cond-mat.mtrl-sci↗

Capillary flow of a suspension in the presence of discontinuous shear thickening

The rheology of suspensions showing discontinuous shear thickening (DST) is well documented in conventional rheometer with rotating tools, but their study in capillary flow is still lacking. We present results obtained in a homemade capillary rheometer working in an imposed pressure regime. We show that the shape of the experimental curve giving the volume flow rate versus the wall stress in a capillary can be qualitatively reproduced from the curve obtained in rotational geometry at imposed stress but instead of a sharp decrease of the volume flow rate observed at a critical stress, this transposition predicts a progressive decrease in flow rate. The Wyart-Cates theory is used to reproduce the stress-shear rate curve obtained in rotational geometry and then applied to predict the volume flow rate at imposed pressure. The theoretical curve predicts a total stop of the flow at high stress, whereas experimentally it remains constant. We propose a modification of the theory which, by taking into account the relaxation of the frictional contacts in the absence of shear rate, well predicts the high stress behavior. We also hypothesized that the DST transition propagates immediately inside the capillary, once the wall shear stress has reached its critical value: $τ_R=τ_c$, even if the internal shear stress $τ(r<R)$ is below the critical one. In this way the whole experimental curve can be well reproduced by the modified W-C model.

cond-mat.mtrl-sci↗

Tunable discontinuous shear thickening in capillary flow of MR suspensions

Very concentrated suspensions of iron particles in water or ethylene glycol can be obtained thanks to the use of superplasticizer molecules used in cement industry. At high volume fractions, these suspensions show a discontinuous shear thickening which was thoroughly characterized in rotational geometries. We will show that the jamming transition is also present in a capillary flow, and that it manifests through the formation of a non-consolidated porous medium at the constriction between the barrel and the capillary. In suspension of iron particles, the dynamics of formation of this porous medium, and so the pressure, can be controlled by a low magnetic field and is reversible for a constant volume flow rate, opening potential new applications in the domain of dampers and force control devices.

cond-mat.mtrl-sci↗

Translational and rotational temperatures of a 2D vibrated granular gas in microgravity

We present an experimental study performed on a vibrated granular gas enclosed into a 2D rectangular cell. Experiments are realized in microgravity. High speed video recording and optical tracking allow to obtain the full kinematics (translation and rotation) of the particles. The inelastic parameters are retrieved from the experimental trajectories as well as the translational and rotational velocity distributions. We report that the experimental ratio of translational versus rotational temperature decreases to the density of the medium but increases with the driving velocity of the cell. These experimental results are compared with existing theories and we point out the differences observed. We also present a model which fairly predicts the equilibrium experimental temperatures along the direction of vibration.

cond-mat.soft↗

Effect of impact energy on the shape of granular heaps

We study experimentally the shape of a granular heap formed pouring a granular material into a vertical Hele-Shaw cell and analyze the effect of the grain impact energy. We propose a continuous model for the steady profile of the heap that explicitly considers energy dissipation of flowing grains through inelastic collisions. We solve the model analytically and analyze the resulting height profile as a function of several parameters, such as the restitution coefficient of the grains and their impact energies. We find good agreement between theory and experiments.

cond-mat.soft↗