arXiv subjects

Ying Liu

Publications and source records attributed to Ying Liu.

At least 109 records · Page 6Linked to original sources

arXiv2025

NetMoniAI: An Agentic AI Framework for Network Security & Monitoring

In this paper, we present NetMoniAI, an agentic AI framework for automatic network monitoring and security that integrates decentralized analysis with lightweight centralized coordination. The framework consists of two layers: autonomous micro-agents at each node perform local traffic analysis and anomaly detection. A central controller then aggregates insights across nodes to detect coordinated attacks and maintain system-wide situational awareness. We evaluated NetMoniAI on a local micro-testbed and through NS-3 simulations. Results confirm that the two-tier agentic-AI design scales under resource constraints, reduces redundancy, and improves response time without compromising accuracy. To facilitate broader adoption and reproducibility, the complete framework is available as open source. This enables researchers and practitioners to replicate, validate, and extend it across diverse network environments and threat scenarios. Github link: https://github.com/pzambare3/NetMoniAI

cs.CR↗

arXiv2025

Observation of edge solitons and transitions between them in a trimer circuit lattice

In nonlinear topological systems, edge solitons either originate from linear topological edge modes or emerge as nonlinearity-induced localized states without topological protection. While electric circuits (ECs) provide a platform for realizing various types of topological insulators, observation of edge solitons and transitions between them in EC lattices remains a challenging problem. Here, we realize quench dynamics in nonlinear ECs to experimentally demonstrate both topologically nontrivial and trivial edge solitons in a trimer EC lattice and transitions between them. In the weakly nonlinear regime, we observe two types of topologically nontrivial edge solitons that originate from the corresponding linear topological edge states, characterized by the presence of mutually antisymmetric or symmetric peaks at two edge sites. Under strong nonlinearity, topologically trivial edge solitons with antisymmetric, symmetric, and asymmetric internal structures are discovered. The work suggests possibilities for exploring sophisticated nonlinear states and transitions between them in nonlinear topological systems.

nlin.PS↗

arXiv2025

Seeing Beyond Frames: Zero-Shot Pedestrian Intention Prediction with Raw Temporal Video and Multimodal Cues

Pedestrian intention prediction is essential for autonomous driving in complex urban environments. Conventional approaches depend on supervised learning over frame sequences and require extensive retraining to adapt to new scenarios. Here, we introduce BF-PIP (Beyond Frames Pedestrian Intention Prediction), a zero-shot approach built upon Gemini 2.5 Pro. It infers crossing intentions directly from short, continuous video clips enriched with structured JAAD metadata. In contrast to GPT-4V based methods that operate on discrete frames, BF-PIP processes uninterrupted temporal clips. It also incorporates bounding-box annotations and ego-vehicle speed via specialized multimodal prompts. Without any additional training, BF-PIP achieves 73% prediction accuracy, outperforming a GPT-4V baseline by 18 %. These findings illustrate that combining temporal video inputs with contextual cues enhances spatiotemporal perception and improves intent inference under ambiguous conditions. This approach paves the way for agile, retraining-free perception module in intelligent transportation system.

cs.CV↗

arXiv2025

Predictive Risk Analysis and Safe Trajectory Planning for Intelligent and Connected Vehicles

The safe trajectory planning of intelligent and connected vehicles is a key component in autonomous driving technology. Modeling the environment risk information by field is a promising and effective approach for safe trajectory planning. However, existing risk assessment theories only analyze the risk by current information, ignoring future prediction. This paper proposes a predictive risk analysis and safe trajectory planning framework for intelligent and connected vehicles. This framework first predicts future trajectories of objects by a local risk-aware algorithm, following with a spatiotemporal-discretised predictive risk analysis using the prediction results. Then the safe trajectory is generated based on the predictive risk analysis. Finally, simulation and vehicle experiments confirm the efficacy and real-time practicability of our approach.

cs.RO↗

arXiv2025

Team PA-VCG's Solution for Competition on Understanding Chinese College Entrance Exam Papers in ICDAR'25

This report presents Team PA-VGG's solution for the ICDAR'25 Competition on Understanding Chinese College Entrance Exam Papers. In addition to leveraging high-resolution image processing and a multi-image end-to-end input strategy to address the challenges of dense OCR extraction and complex document layouts in Gaokao papers, our approach introduces domain-specific post-training strategies. Experimental results demonstrate that our post-training approach achieves the most outstanding performance, securing first place with an accuracy rate of 89.6%.

cs.CV↗

arXiv2025

LAVA: Lifetime-Aware VM Allocation with Learned Distributions and Adaptation to Mispredictions

Scheduling virtual machines (VMs) on hosts in cloud data centers dictates efficiency and is an NP-hard problem with incomplete information. Prior work improved VM scheduling with predicted VM lifetimes. Our work further improves lifetime-aware scheduling using repredictions with lifetime distributions versus one-shot prediction. Our approach repredicts and adjusts VM and host lifetimes when incorrect predictions emerge. We also present novel approaches for defragmentation and regular system maintenance, which are essential to our data center reliability and optimizations, and are not explored in prior work. We show repredictions deliver a fundamental advance in effectiveness over one-shot prediction. We call our novel combination of distribution-based lifetime predictions and scheduling algorithms Lifetime Aware VM Allocation (LAVA). LAVA reduces resource stranding and increases the number of empty hosts, which are critical for large VM scheduling, cloud system updates, and reducing dynamic energy consumption. Our approach runs in production within Google's hyperscale cloud data centers, where it improves efficiency by decreasing stranded compute and memory resources by ~3% and ~2% respectively. It increases empty hosts by 2.3-9.2 pp in production, reducing dynamic energy consumption, and increasing availability for large VMs and cloud system updates. We also show a reduction in VM migrations for host defragmentation and maintenance. In addition to our fleet-wide production deployment, we perform simulation studies to characterize the design space and show that our algorithm significantly outperforms the prior state of the art lifetime-based scheduling approach.

cs.DC↗

arXiv2025

Enhancing the sensitivity of quantum optomechanical gyroscope by optical Kerr effect

We propose a theoretical scheme to enhance the sensitivity of a quantum optomechanical gyroscope (QOMG) by optical Kerr effect. We utilize quantum Fisher information (QFI) to evaluate the metrological potential of the QOMG scheme. It is found that the Kerr interaction can significantly enhances the sensitivity of the QOMG. We observe the super-Hesenberg scaling of parameter estimation precision. Furthermore, we also evaluate the performance of QOMG for the quadrature measurement. It is indicated that the sensitivity in the quadrature measurement scheme can saturate the quantum Crmamér-Rao bound. We study the effect of the driving and dissipation of the optical cavity on the QFI, and find that the sensitivity can be manipulated by changing the driving while dissipation decreases the sensitivity. The work shows that the photon nonlinear interaction can improve sensitivity of QOMG, and demonstrates a valuable quantum resource for the QOMG. These results could have a wide-ranging impact on developing high-performance QOMG in the future.

quant-ph↗

arXiv2025

From the New World of Word Embeddings: A Comparative Study of Small-World Lexico-Semantic Networks in LLMs

Lexico-semantic networks represent words as nodes and their semantic relatedness as edges. While such networks are traditionally constructed using embeddings from encoder-based models or static vectors, embeddings from decoder-only large language models (LLMs) remain underexplored. Unlike encoder models, LLMs are trained with a next-token prediction objective, which does not directly encode the meaning of the current token. In this paper, we construct lexico-semantic networks from the input embeddings of LLMs with varying parameter scales and conduct a comparative analysis of their global and local structures. Our results show that these networks exhibit small-world properties, characterized by high clustering and short path lengths. Moreover, larger LLMs yield more intricate networks with less small-world effects and longer paths, reflecting richer semantic structures and relations. We further validate our approach through analyses of common conceptual pairs, structured lexical relations derived from WordNet, and a cross-lingual semantic network for qualitative words.

cs.CL↗

arXiv2025

MROSS: Multi-Round Region-based Optimization for Scene Sketching

Scene sketching is to convert a scene into a simplified, abstract representation that captures the essential elements and composition of the original scene. It requires a semantic understanding of the scene and consideration of different regions within the scene. Since scenes often contain diverse visual information across various regions, such as foreground objects, background elements, and spatial divisions, dealing with these different regions poses unique difficulties. In this paper, we define a sketch as some sets of Bézier curves because of their smooth and versatile characteristics. We optimize different regions of input scene in multiple rounds. In each optimization round, the strokes sampled from the next region can seamlessly be integrated into the sketch generated in the previous optimization round. We propose an additional stroke initialization method to ensure the integrity of the scene and the convergence of optimization. A novel CLIP-based Semantic Loss and a VGG-based Feature Loss are utilized to guide our multi-round optimization. Extensive experimental results on the quality and quantity of the generated sketches confirm the effectiveness of our method.

cs.CV↗

arXiv2025

One-Dimensional Potassium Chains on Silicon Nanoribbons

Silicon nanoribbons (SiNRs), characterized by a pentagonal structure composed of silicon atoms, host one-dimensional (1D) Dirac Fermions and serve as a minimalist atomic template for adsorbing various heteroatoms. Alkali-metal (AM) atoms, such as Na and K, with electronic structures comparable to those of hydrogen are of particular interest for such adsorption studies. However, the adsorption of AM atoms on SiNRs and its tunation on the properties of SiNRs have not yet been fully explored. In this study, we examined the adsorption of K atoms on high-aspect-ratio SiNRs and the resultant electronic properties using a combination of scanning tunneling microscopy (STM) and density functional theory calculations. K atoms prefer to adsorb on double- and multi-stranded SiNRs owing to the low adsorption energies at these sites. Each K atom and its three nearest Si atoms exhibit a triangular morphology resulting from charge transfer between K and Si atoms, as verified by theoretical calculations. As the K coverage of the SiNRs increased, the K atoms organize into 1D zigzag chains on the SiNRs. Moreover, K adsorption on the SiNRs was determined to be reversible. The deposition of K atoms on the SiNRs was achieved using a voltage pulse of the STM tip, without damaging the SiNRs structure. In addition, K adsorption effectively modulates the Dirac cone position of the SiNRs relative to the Fermi level. This study unveils the adsorption mechanism of AM atoms on SiNRs, providing a useful approach for heteroatom adsorption on other nanoribbons.

cond-mat.mes-hall↗

arXiv2025

Realization of a non-Hermitian Haldane model in circuits

The Haldane model is the simplest yet most powerful topological lattice model exhibiting various phases, including the Dirac semimetal phase and the anomalous quantum Hall phase (also known as the Chern insulator). Although considered unlikely to be physically directly realizable in condensed matter systems, it has been experimentally demonstrated in other physical settings such as cold atoms, where Hermiticity is usually preserved. Extending this model to the non-Hermitian regime with energy non-conservation can significantly enrich topological phases that lack Hermitian counterparts; however, such exploration remains experimentally challenging due to the lack of suitable physical platforms. Here, based on electric circuits, we report the experimental realization of a genuine non-Hermitian Haldane model with asymmetric next-nearest-neighbor hopping. We observe two previously uncovered phases: a non-Hermitian Chern insulator and a non-Hermitian semimetal phase, both exhibiting boundary-dependent amplifying or dissipative chiral edge states. Our work paves the way for exploring non-Hermiticity-induced unconventional topological phases in the Haldane model.

physics.optics↗

arXiv2025

A Top-down Graph-based Tool for Modeling Classical Semantic Maps: A Crosslinguistic Case Study of Supplementary Adverbs

Semantic map models (SMMs) construct a network-like conceptual space from cross-linguistic instances or forms, based on the connectivity hypothesis. This approach has been widely used to represent similarity and entailment relationships in cross-linguistic concept comparisons. However, most SMMs are manually built by human experts using bottom-up procedures, which are often labor-intensive and time-consuming. In this paper, we propose a novel graph-based algorithm that automatically generates conceptual spaces and SMMs in a top-down manner. The algorithm begins by creating a dense graph, which is subsequently pruned into maximum spanning trees, selected according to metrics we propose. These evaluation metrics include both intrinsic and extrinsic measures, considering factors such as network structure and the trade-off between precision and coverage. A case study on cross-linguistic supplementary adverbs demonstrates the effectiveness and efficiency of our model compared to human annotations and other automated methods. The tool is available at https://github.com/RyanLiut/SemanticMapModel.

cs.CL↗

arXiv2025

Enhanced gradient recovery-based a posteriori error estimator and adaptive finite element method for elliptic equations

Recovery type a posteriori error estimators are popular, particularly in the engineering community, for their computationally inexpensive, easy to implement, and generally asymptotically exactness. Unlike the residual type error estimators, one can not establish upper and lower a posteriori error bounds for the classical recovery type error estimators without the saturation assumption. In this paper, we first present three examples to show the unsatisfactory performance in the practice of standard residual or recovery-type error estimators, then, an improved gradient recovery-based a posteriori error estimator is constructed. The proposed error estimator contains two parts, one is the difference between the direct and post-processed gradient approximations, and the other is the residual of the recovered gradient. The reliability and efficiency of the enhanced estimator are derived. Based on the improved recovery-based error estimator and the newest-vertex bisection refinement method with a tailored mark strategy, an adaptive finite element algorithm is designed. We then prove the convergence of the adaptive method by establishing the contraction of gradient error plus oscillation. Numerical experiments are provided to illustrate the asymptotic exactness of the new recovery-based a posteriori error estimator and the high efficiency of the corresponding adaptive algorithm.

math.NA↗

arXiv2025

High Accuracy Techniques Based Adaptive Finite Element Methods for Elliptic PDEs

This paper aims to develop an efficient adaptive finite element method for the second-order elliptic problem. Although the theory for adaptive finite element methods based on residual-type a posteriori error estimator and bisection refinement has been well established, in practical computations, the use of non-asymptotic exact of error estimator and the excessive number of adaptive iteration steps often lead to inefficiency of the adaptive algorithm. We propose an efficient adaptive finite element method based on high-accuracy techniques including the superconvergence recovery technique and high-quality mesh optimization. The centroidal Voronoi Delaunay triangulation mesh optimization is embedded in the mesh adaption to provide high-quality mesh, and then assure that the superconvergence property of the recovered gradient and the asymptotical exactness of the error estimator. A tailored adaptive strategy, which could generate high-quality meshes with a target number of vertices, is developed to ensure the adaptive computation process terminated within $7$ steps. The effectiveness and robustness of the adaptive algorithm is numerically demonstrated.

math.NA↗

arXiv2025

An alternative application of GaAs-based light-emitting diodes: X-ray detection and imaging

GaAs-based light-emitting diodes (LEDs) are commonly employed in a variety of applications, including medical imaging, biosensing, optical communications, and night vision. In this paper, we present an alternative application of GaAs-based LED with SI-GaAs substrate for X-ray detection and imaging. The mechanism relies on the semiconductor frequency down-conversion process, where the SI-GaAs substrate acts as a photodetector (PD). Upon X-ray irradiation, the generated photocurrent by the SI-GaAs substrate drives the LED to emit NIR photons which can be detect by a low-cost CCD. We demonstrate direct X-ray detection and present preliminary imaging results, providing another example of the applicability of the PD-LED design for optical frequency conversion. The proposed LED X-ray detector leverages mature materials and fabrication processes. The application of the frequency down-conversion concept makes it possible for pixel-less imaging using a large single imaging unit, eliminating the need for readout circuits. This PD-LED architecture offers an alternative approach to direct X-ray detection and imaging, characterized by higher absorption, improved image resolution, and enhanced material stability.

physics.optics↗

arXiv2025

Ultra-Stable Ferrimagnetic Second-Order Topological Insulator in 2D Metal-Organic Framework

Two-dimensional (2D) magnetic second-order topological insulators (SOTIs) exhibit distinct topological phases characterized by spin-polarized zero-dimensional (0D) corner states, which have garnered significant interest. However, 2D ferrimagnetic (FiM) SOTIs, particularly those that simultaneously exhibit ultra-stable corner states, are still lacking. Here, based on first-principles calculations and theoretical analysis, we reveal such SOTI state in a 2D metal-organic framework (MOF) material, Cr(pyz)2 (pyz = pyrazine). This material exhibits FiM ground state with an easy axis aligned along [001] direction. It hosts a nontrivial real Chern number in the spin-up channel, enabled by PT symmetry, with 0D corner states observable in disk. In contrast, the spin-down channel exhibits a trivial gapped bulk state. Notably, the topological corner states in monolayer Cr(pyz)2 show high robustness, even if the symmetries are broken by introducing defects, the corner states persist. We also considered other external perturbations, including uniaxial/biaxial strain, ligand rotation, and electric fields, the corner states still remain stable. Even more, the energy positions of the corner states are also nearly unchanged. This work is the first to identify ultra-stable FiM SOTI state in the MOF system, and provide an ideal platform for future experimental investigations and applications in spintronic devices.

cond-mat.mtrl-sci↗

arXiv2025

Vortices and antivortices in antiferroelectric PbZrO3

Although ferroelectric materials are characterised by their parallel arrangement of electric dipoles, in the right boundary conditions these dipoles can reorganize themselves into vortices, antivortices and other non-trivial topological structures. By contrast, little is known about how (or whether) antiferroelectrics, which are materials showing an antiparallel arrangement of electric dipoles, can exhibit vortices or antivortices. In this study, using advanced aberration-corrected scanning transmission electron microscopy, we uncover the existence of atomic-scale (anti)vorticity in ferroelastic domain walls of the archetypal antiferroelectric phase of PbZrO3. The finding is supported, and its underlying physics is explained, using both second-principles simulations based on a deep-learning interatomic potential, and continuum field modelling. This discovery expands the field of chiral topologies into antiferroelectrics.

cond-mat.mtrl-sci↗

arXiv2024

JuniperLiu at CoMeDi Shared Task: Models as Annotators in Lexical Semantics Disagreements

We present the results of our system for the CoMeDi Shared Task, which predicts majority votes (Subtask 1) and annotator disagreements (Subtask 2). Our approach combines model ensemble strategies with MLP-based and threshold-based methods trained on pretrained language models. Treating individual models as virtual annotators, we simulate the annotation process by designing aggregation measures that incorporate continuous relatedness scores and discrete classification labels to capture both majority and disagreement. Additionally, we employ anisotropy removal techniques to enhance performance. Experimental results demonstrate the effectiveness of our methods, particularly for Subtask 2. Notably, we find that standard deviation on continuous relatedness scores among different model manipulations correlates with human disagreement annotations compared to metrics on aggregated discrete labels. The code will be published at https://github.com/RyanLiut/CoMeDi_Solution.

cs.CL↗