Search arXiv⌕ Search

arXiv subjects

Ying Wang

Publications and source records attributed to Ying Wang.

At least 397 records · Page 22Linked to original sources

Realization of quasicrystalline quadrupole topological insulators in electrical circuits

Quadrupole topological insulators are a new class of topological insulators with quantized quadrupole moments, which support protected gapless corner states. The experimental demonstrations of quadrupole-topological insulators were reported in a series of artificial materials, such as photonic crystals, acoustic crystals, and electrical circuits. In all these cases, the underlying structures have discrete translational symmetry and thus are periodic. Here we experimentally realize two-dimensional aperiodic-quasicrystalline quadrupole-topological insulators by constructing them in electrical circuits, and observe the spectrally and spatially localized corner modes. In measurement, the modes appear as topological boundary resonances in the corner impedance spectra. Additionally, we demonstrate the robustness of corner modes on the circuit. Our circuit design may be extended to study topological phases in higher-dimensional aperiodic structures.

cond-mat.mes-hall↗

InverseForm: A Loss Function for Structured Boundary-Aware Segmentation

We present a novel boundary-aware loss term for semantic segmentation using an inverse-transformation network, which efficiently learns the degree of parametric transformations between estimated and target boundaries. This plug-in loss term complements the cross-entropy loss in capturing boundary transformations and allows consistent and significant performance improvement on segmentation backbone models without increasing their size and computational complexity. We analyze the quantitative and qualitative effects of our loss function on three indoor and outdoor segmentation benchmarks, including Cityscapes, NYU-Depth-v2, and PASCAL, integrating it into the training phase of several backbone networks in both single-task and multi-task settings. Our extensive experiments show that the proposed method consistently outperforms baselines, and even sets the new state-of-the-art on two datasets.

cs.CV↗

Differentiable Joint Pruning and Quantization for Hardware Efficiency

We present a differentiable joint pruning and quantization (DJPQ) scheme. We frame neural network compression as a joint gradient-based optimization problem, trading off between model pruning and quantization automatically for hardware efficiency. DJPQ incorporates variational information bottleneck based structured pruning and mixed-bit precision quantization into a single differentiable loss function. In contrast to previous works which consider pruning and quantization separately, our method enables users to find the optimal trade-off between both in a single training procedure. To utilize the method for more efficient hardware inference, we extend DJPQ to integrate structured pruning with power-of-two bit-restricted quantization. We show that DJPQ significantly reduces the number of Bit-Operations (BOPs) for several networks while maintaining the top-1 accuracy of original floating-point models (e.g., 53x BOPs reduction in ResNet18 on ImageNet, 43x in MobileNetV2). Compared to the conventional two-stage approach, which optimizes pruning and quantization independently, our scheme outperforms in terms of both accuracy and BOPs. Even when considering bit-restricted quantization, DJPQ achieves larger compression ratios and better accuracy than the two-stage approach.

cs.LG↗

Construction of explicit symplectic integrators in general relativity. III. Reissner-Nordstrom-(anti)-de Sitter black holes

We give a possible splitting method to a Hamiltonian for the description of charged particles moving around the Reissner-Nordstrom-(anti)-de Sitter black hole with an external magnetic field. This Hamiltonian can be separated into six analytical solvable pieces, whose solutions are explicit functions of proper time. In this case, second- and fourth-order explicit symplectic integrators are easily available. They exhibit excellent long-term behavior in maintaining the boundness of Hamiltonian errors regardless of ordered or chaotic orbits if appropriate step-sizes are chosen. Under some circumstances, an increase of positive cosmological constant gives rise to strengthening the extent of chaos from the global phase space; namely, chaos of charged particles occurs easily for the accelerated expansion of the universe. However, an increase of the magnitude of negative cosmological constant does not. The different contributions on chaos are because the cosmological constant acts as a repulsive force in the Reissner-Nordstrom-de Sitter black hole, but an attractive force in the Reissner-Nordstrom-anti-de Sitter black hole.

gr-qc↗

An Iterative Heuristic Method to Determine Radial Topology for Distribution System Restoration

Coordinating multiple local power sources can restore critical loads after the major outages caused by extreme events. A radial topology is needed for distribution system restoration, while determining a good topology in real-time for online use is a challenge. In this paper, a graph theory-based heuristic considering power flow state is proposed to fast determine the radial topology. The loops of distribution network are eliminated by iteration. The proposed method is validated by one snapshot and multi-period critical load restoration models on different cases. The case studies indicate that the proposed method can determine radial topology in a few seconds and ensure the restoration capacity.

eess.SY↗

SWA Object Detection

Do you want to improve 1.0 AP for your object detector without any inference cost and any change to your detector? Let us tell you such a recipe. It is surprisingly simple: train your detector for an extra 12 epochs using cyclical learning rates and then average these 12 checkpoints as your final detection model}. This potent recipe is inspired by Stochastic Weights Averaging (SWA), which is proposed in arXiv:1803.05407 for improving generalization in deep neural networks. We found it also very effective in object detection. In this technique report, we systematically investigate the effects of applying SWA to object detection as well as instance segmentation. Through extensive experiments, we discover the aforementioned workable policy of performing SWA in object detection, and we consistently achieve $\sim$1.0 AP improvement over various popular detectors on the challenging COCO benchmark, including Mask RCNN, Faster RCNN, RetinaNet, FCOS, YOLOv3 and VFNet. We hope this work will make more researchers in object detection know this technique and help them train better object detectors. Code is available at: https://github.com/hyz-xmaster/swa_object_detection .

cs.CV↗

Electronic structures and topological phases of magnetic layered materials MnBi2Te4, MnBi2Se4 and MnSb2Te4

First-principles calculations are performed to study the electronic structures and topological phases of magnetic layered materials MnBi2Te4, MnBi2Se4 and MnSb2Te4 under different film thicknesses, strains and spin-orbit coupling (SOC) strengths. All these compounds energetically prefer the antiferromagnetic (AFM) state. MnBi2Te4 and MnSb2Te4 bulks are AFM topological insulators (TIs) in the AFM state, while they become Weyl semimetals in the ferromagnetic (FM) state. MnBi2Se4 is trivially insulating in both the AFM and FM states, but it becomes an AFM TI or a Weyl semimetal with increasing SOC strength or applying compressive strains. Under equilibrium lattice constants, the FM MnBi2Te4 slabs thicker than two septuple layers (SLs), the AFM MnBi2Te4 slabs thicker than three SLs and the FM MnSb2Te4 slabs thicker than five SLs are all Chern insulators. In addition, Chern insulators can also be obtained by compressing the in-plane lattice constants of the FM MnBi2Se4 slabs thicker than four SLs and the FM MnSb2Te4 slabs of three or four SLs, but cannot be obtained using the same method in the AFM slabs of these two materials. In-plane tensile strains about 1% to 2% turn the Chern insulators into trivial insulators.

physics.comp-ph↗

VarifocalNet: An IoU-aware Dense Object Detector

Accurately ranking the vast number of candidate detections is crucial for dense object detectors to achieve high performance. Prior work uses the classification score or a combination of classification and predicted localization scores to rank candidates. However, neither option results in a reliable ranking, thus degrading detection performance. In this paper, we propose to learn an Iou-aware Classification Score (IACS) as a joint representation of object presence confidence and localization accuracy. We show that dense object detectors can achieve a more accurate ranking of candidate detections based on the IACS. We design a new loss function, named Varifocal Loss, to train a dense object detector to predict the IACS, and propose a new star-shaped bounding box feature representation for IACS prediction and bounding box refinement. Combining these two new components and a bounding box refinement branch, we build an IoU-aware dense object detector based on the FCOS+ATSS architecture, that we call VarifocalNet or VFNet for short. Extensive experiments on MS COCO show that our VFNet consistently surpasses the strong baseline by $\sim$2.0 AP with different backbones. Our best model VFNet-X-1200 with Res2Net-101-DCN achieves a single-model single-scale AP of 55.1 on COCO test-dev, which is state-of-the-art among various object detectors.Code is available at https://github.com/hyz-xmaster/VarifocalNet .

cs.CV↗

Construction of explicit symplectic integrators in general relativity. II. Reissner-Nordstrom black holes

In a previous paper, second- and fourth-order explicit symplectic integrators were designed for a Hamiltonian of the Schwarzschild black hole. Following this work, we continue to trace the possibility of the construction of explicit symplectic integrators for a Hamiltonian of charged particles moving around a Reissner-Nordstrom black hole with an external magnetic field. Such explicit symplectic methods are still available when the Hamiltonian is separated into five independently integrable parts with analytical solutions as explicit functions of proper time. Numerical tests show that the proposed algorithms share the desirable properties in their long-term stability, precision and efficiency for appropriate choices of step sizes. For the applicability of one of the new algorithms, the effects of the black hole's charge, the Coulomb part of the electromagnetic potential and the magnetic parameter on the dynamical behavior are surveyed. Under some circumstances, the extent of chaos gets strong with an increase of the magnetic parameter from a global phase-space structure. No the variation of the black hole's charge but the variation of the Coulomb part is considerably sensitive to affect the regular and chaotic dynamics of particles' orbits. A positive Coulomb part is easier to induce chaos than a negative one.

gr-qc↗

Damage accumulation during high temperature fatigue of Ti/SiC$_f$ metal matrix composites under different stress amplitudes

The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $μ$m) under high temperature (350 °C) fatigue cycling have been investigated in situ using synchrotron X-ray computed tomography (CT) and X-ray diffraction (XRD) for high cycle fatigue (HCF) under different stress amplitudes. The three-dimensional morphology of the crack and fibre fractures has been mapped by CT. During stable growth, matrix cracking dominates with the crack deflecting (by 50-100 $μ$m in height) when bypassing bridging fibres. A small number of bridging fibres have fractured close to the matrix crack plane especially under relatively high stress amplitude cycling. Loading to the peak stress led to rapid crack growth accompanied by a burst of fibre fractures. Many of the fibre fractures occurred 50-300 $μ$m from the matrix crack plane during rapid growth, in contrast to that in the stable growth stage, leading to extensive fibre pull-out on the fracture surface. The changes in fibre loading, interfacial stress, and the extent of fibre-matrix debonding in the vicinity of the crack have been mapped for the fatigue cycle and after the rapid growth by high spatial resolution XRD. The fibre/matrix interfacial sliding extends up to 600 $μ$m (in the stable growth zone) or 700 $μ$m (in the rapid growth zone) either side of the crack plane. The direction of interfacial shear stress reverses with the loading cycle, with the maximum frictional sliding stress reaching ~55 MPa in both the stable growth and rapid growth regimes.

cond-mat.mtrl-sci↗

Hero: On the Chaos When PATH Meets Modules

Ever since its first release in 2009, the Go programming language (Golang) has been well received by software communities. A major reason for its success is the powerful support of library-based development, where a Golang project can be conveniently built on top of other projects by referencing them as libraries. As Golang evolves, it recommends the use of a new library-referencing mode to overcome the limitations of the original one. While these two library modes are incompatible, both are supported by the Golang ecosystem. The heterogeneous use of library-referencing modes across Golang projects has caused numerous dependency management (DM) issues, incurring reference inconsistencies and even build failures. Motivated by the problem, we conducted an empirical study to characterize the DM issues, understand their root causes, and examine their fixing solutions. Based on our findings, we developed \textsc{Hero}, an automated technique to detect DM issues and suggest proper fixing solutions. We applied \textsc{Hero} to 19,000 popular Golang projects. The results showed that \textsc{Hero} achieved a high detection rate of 98.5\% on a DM issue benchmark and found 2,422 new DM issues in 2,356 popular Golang projects. We reported 280 issues, among which 181 (64.6\%) issues have been confirmed, and 160 of them (88.4\%) have been fixed or are under fixing. Almost all the fixes have adopted our fixing suggestions.

cs.SE↗

Electroabsorption in gated GaAs nanophotonic waveguides

We report on the analysis of electroabsorption in thin GaAs/Al$_{0.3}$Ga$_{0.7}$As nanophotonic waveguides with an embedded $p$-$i$-$n$ junction. By measuring the transmission through waveguides of different lengths, we derive the propagation loss as a function of electric field, wavelength, and temperature. The results are in good agreement with the Franz-Keldysh model of electroabsorption extending over 200 meV below the GaAs bandgap, i.e. in the 910--970 nm wavelength range. We find a pronounced residual absorption in forward bias, which we attribute to Fermi-level pinning at the waveguide surface, producing over 20 dB/mm loss at room temperature. These results are essential for understanding the origin of loss in nanophotonic devices operating in the emission range of self-assembled InAs semiconductor quantum dots, towards the realization of scalable quantum photonic integrated circuits.

physics.optics↗

Construction of Explicit Symplectic Integrators in General Relativity. I. Schwarzschild Black Holes

Symplectic integrators that preserve the geometric structure of Hamiltonian flows and do not exhibit secular growth in energy errors are suitable for the long-term integration of N-body Hamiltonian systems in the solar system. However, the construction of explicit symplectic integrators is frequently difficult in general relativity because all variables are inseparable. Moreover, even if two analytically integrable splitting parts exist in a relativistic Hamiltonian, all analytical solutions are not explicit functions of proper time. Naturally, implicit symplectic integrators, such as the midpoint rule, are applicable to this case. In general, these integrators are numerically more expensive to solve than same-order explicit symplectic algorithms. To address this issue, we split the Hamiltonian of Schwarzschild spacetime geometry into four integrable parts with analytical solutions as explicit functions of proper time. In this manner, second- and fourth-order explicit symplectic integrators can be easily made available. The new algorithms are also useful for modeling the chaotic motion of charged particles around a black hole with an external magnetic field. They demonstrate excellent long-term performance in maintaining bounded Hamiltonian errors and saving computational cost when appropriate proper time steps are adopted.

gr-qc↗

MPC-CSAS: Multi-Party Computation for Real-time Privacy-preserving Speed Advisory Systems

As a part of Advanced Driver Assistance Systems (ADASs), Consensus-based Speed Advisory Systems (CSAS) have been proposed to recommend a common speed to a group of vehicles for specific application purposes, such as emission control and energy management. With Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) technologies and advanced control theories in place, state-of-the-art CSAS can be designed to get an optimal speed in a privacy-preserving and decentralized manner. However, the current method only works for specific cost functions of vehicles, and its execution usually involves many algorithm iterations leading long convergence time. Therefore, the state-of-the-art design method is not applicable to a CSAS design which requires real-time decision making. In this paper, we address the problem by introducing MPC-CSAS, a Multi-Party Computation (MPC) based design approach for privacy-preserving CSAS. Our proposed method is simple to implement and applicable to all types of cost functions of vehicles. Moreover, our simulation results show that the proposed MPC-CSAS can achieve very promising system performance in just one algorithm iteration without using extra infrastructure for a typical CSAS.

eess.SY↗

Transport in helical Luttinger liquids in the fractional quantum Hall regime

Domain walls in fractional quantum Hall ferromagnets are gapless helical one-dimensional channels formed at the boundaries of topologically distinct quantum Hall (QH) liquids. Naïvely, these helical domain walls (hDWs) constitute two counter-propagating chiral states with opposite spins. Coupled to an s-wave superconductor, helical channels are expected to lead to topological superconductivity with high order non-Abelian excitations. Here we investigate transport properties of hDWs in the $ν=2/3$ fractional QH regime. Experimentally we found that current carried by hDWs is substantially smaller than the prediction of the naïve model. Luttinger liquid theory of the system reveals redistribution of currents between quasiparticle charge, spin and neutral modes, and predicts the reduction of the hDW current. Inclusion of spin-non-conserving tunneling processes reconciles theory with experiment. The theory confirms emergence of spin modes required for the formation of fractional topological superconductivity.

cond-mat.mes-hall↗

An Adaptive Gas Cost Mechanism for Ethereum to Defend Against Under-Priced DoS Attacks

The gas mechanism in Ethereum charges the execution of every operation to ensure that smart contracts running in EVM (Ethereum Virtual Machine) will be eventually terminated. Failing to properly set the gas costs of EVM operations allows attackers to launch DoS attacks on Ethereum. Although Ethereum recently adjusted the gas costs of EVM operations to defend against known DoS attacks, it remains unknown whether the new setting is proper and how to configure it to defend against unknown DoS attacks. In this paper, we make the first step to address this challenging issue by first proposing an emulation-based framework to automatically measure the resource consumptions of EVM operations. The results reveal that Ethereum's new setting is still not proper. Moreover, we obtain an insight that there may always exist exploitable under-priced operations if the cost is fixed. Hence, we propose a novel gas cost mechanism, which dynamically adjusts the costs of EVM operations according to the number of executions, to thwart DoS attacks. This method punishes the operations that are executed much more frequently than before and lead to high gas costs. To make our solution flexible and secure and avoid frequent update of Ethereum client, we design a special smart contract that collaborates with the updated EVM for dynamic parameter adjustment. Experimental results demonstrate that our method can effectively thwart both known and unknown DoS attacks with flexible parameter settings. Moreover, our method only introduces negligible additional gas consumption for benign users.

cs.CR↗

Contribution of Magnetic Reconnection Events to Energy Dissipation in Magnetosheath Turbulence

By analyzing the magnetosheath measurements from MMS, we obtain the statistical results for the contribution of magnetic reconnection (MR) events at electron scales to the energy dissipation of coherent structures. The Partial Variance of Increments (PVI) method is employed to find coherent structures in the magnetic field data. The current sheet structures with reversal of magnetic field components are further selected. We consider the following criteria to identify the MR events, such as current sheet with magnetic field reversal, significant energy dissipation, and evident electron outflow velocity. Statistically, for most MR events, their PVI values are larger than that of other types of coherent structures, and their energy dissipations are also stronger than that of others. However, due to the relatively small proportion of MR events, their contribution to coherent structures' energy dissipation is relatively trivial. If taken into account the dissipation of non-coherent structures, the MR's contribution to energy dissipation would be less. Hence, we suggest that MR events, though have strong dissipation locally, are not the major contributor to the energy dissipation in the magnetosheath. After analyzing the features of non-MR current sheets, we propose that non-MR current sheets are mainly coherent structures inherent to kinetic Alfvén fluctuations.

physics.plasm-ph↗