arXiv subjects

Yuji Zhao

Publications and source records attributed to Yuji Zhao.

15 recordsLinked to original sources

arXiv2026

Thermal Stability and Phase Transformation of Conductive $\alpha$-$(\mathrm{Al}_{x}\mathrm{Ga}_{1-x})_{2}\mathrm{O}_{3}/\mathrm{Ga}_{2}\mathrm{O}_{3}$ Heterostructures on Sapphire Substrates

Thermal stability and phase transformation of conductive $\alpha$-$(\mathrm{Al}_{0.16}\mathrm{Ga}_{0.84})_{2}\mathrm{O}_{3}/\mathrm{Ga}_{2}\mathrm{O}_{3}$ heterostructures on sapphire substrates were investigated using in situ high-temperature X-ray diffraction (HT-XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Conductive $\alpha$-$(\mathrm{Al}_{0.16}\mathrm{Ga}_{0.84})_{2}\mathrm{O}_{3}/\mathrm{Ga}_{2}\mathrm{O}_{3}$ heterostructures with fluorine (F) doping were grown by mist chemical vapor deposition on sapphire substrates, achieving a Hall mobility of $28~\mathrm{cm^{2}\,V^{-1}\,s^{-1}}$ and an electron concentration of $1.4\times10^{20}~\mathrm{cm^{-3}}$. The heterostructures exhibited thermal stability up to approximately $550$--$

cond-mat.mtrl-sci↗

arXiv2025

Conditional Neural ODE for Longitudinal Parkinson's Disease Progression Forecasting

Parkinson's disease (PD) shows heterogeneous, evolving brain-morphometry patterns. Modeling these longitudinal trajectories enables mechanistic insight, treatment development, and individualized 'digital-twin' forecasting. However, existing methods usually adopt recurrent neural networks and transformer architectures, which rely on discrete, regularly sampled data while struggling to handle irregular and sparse magnetic resonance imaging (MRI) in PD cohorts. Moreover, these methods have difficulty capturing individual heterogeneity including variations in disease onset, progression rate, and symptom severity, which is a hallmark of PD. To address these challenges, we propose CNODE (Conditional Neural ODE), a novel framework for continuous, individualized PD progression forecasting. The core of CNODE is to model morphological brain changes as continuous temporal processes using a neural ODE model. In addition, we jointly learn patient-specific initial time and progress speed to align individual trajectories into a shared progression trajectory. We validate CNODE on the Parkinson's Progression Markers Initiative (PPMI) dataset. Experimental results show that our method outperforms state-of-the-art baselines in forecasting longitudinal PD progression.

cs.LG↗

arXiv2023

Temperature Dependent Low-Frequency Noise Characteristics of NiO$_x$/Ga$_2$O$_3$ p-n Heterojunction Diodes

We report on the temperature dependence of the low-frequency electronic noise in NiO$_x$/Ga$_2$O$_3$ p-n heterojunction diodes. The noise spectral density is of the 1/f-type near room temperature but shows signatures of Lorentzian components at elevated temperatures and at higher current levels (f is the frequency). We observed an intriguing non-monotonic dependence of the noise on temperature near T = 380$^\circ$ K. The Raman spectroscopy of the device structure suggests material changes, which results in reduced noise above this temperature. The normalized noise spectral density in such diodes was determined to be on the order of 10$^{-14}$ cm$^2$/Hz (f = 10 Hz) at 0.1 A/cm$^2$ current density. In terms of the noise level, NiO$_x$/Ga$_2$O$_3$ p-n diodes occupy an intermediate position among devices of various designs implemented with different ultra-wide-band-gap (UWBG) semiconductors. The obtained results are important for understanding the electronic properties of the UWBG heterojunctions and contribute to the development of noise spectroscopy as the quality assessment tool for new electronic materials and device technologies.

physics.app-ph↗

arXiv2023

Structural, optical, and thermal properties of BN thin films grown on diamond via pulsed laser deposition

Heterostructures based on ultrawide-bandgap (UWBG) semiconductors (bandgap >4.0 eV), boron nitride (BN) and diamond are important for next-generation high-power electronics. However, in-situ hetero-epitaxy of BN/diamond or vice-versa remains extremely challenging, due to their non-trivial growth kinetics. Here, we have grown BN thin film on (100) single crystal diamond by pulsed laser deposition and investigated its structural and magnetic properties, optical refractive index, and thermal conductivity. Structural characterizations confirm the mixed (stable hexagonal and metastable cubic) phase growth. Film shows diamagnetic behavior at room temperature. It displays anisotropic refractive index within the visible-to-near-infrared wavelength range. The room temperature cross-plane thermal conductivity of BN is ~1.53 W/(mK), and the thermal conductance of the BN/diamond interface is ~20 MW/(m2K). Our findings are useful for various device related applications based on UWBG BN/diamond heterostructures.

physics.app-ph↗

arXiv2023

Non-linear optics at twist interfaces in h-BN/SiC heterostructures

Understanding the emergent electronic structure in twisted atomically thin layers has led to the exciting field of twistronics. However, practical applications of such systems are challenging since the specific angular correlations between the layers must be precisely controlled and the layers have to be single crystalline with uniform atomic ordering. Here, we suggest an alternative, simple and scalable approach where nanocrystalline two-dimensional (2D) film on three-dimensional (3D) substrates yield twisted-interface-dependent properties. Ultrawide-bandgap hexagonal boron nitride (h-BN) thin films are directly grown on high in-plane lattice mismatched wide-bandgap silicon carbide (4H-SiC) substrates to explore the twist-dependent structure-property correlations. Concurrently, nanocrystalline h-BN thin film shows strong non-linear second-harmonic generation and ultra-low cross-plane thermal conductivity at room temperature, which are attributed to the twisted domain edges between van der Waals stacked nanocrystals with random in-plane orientations. First-principles calculations based on time-dependent density functional theory manifest strong even-order optical nonlinearity in twisted h-BN layers. Our work unveils that directly deposited 2D nanocrystalline thin film on 3D substrates could provide easily accessible twist-interfaces, therefore enabling a simple and scalable approach to utilize the 2D-twistronics integrated in 3D material devices for next-generation nanotechnology.

cond-mat.mtrl-sci↗

arXiv2023

Low-Frequency Electronic Noise in the Aluminum Gallium Oxide Schottky Barrier Diodes

We report on the low-frequency electronic noise in (Al$_x$Ga$_{1-x}$)$_2$O$_3$ Schottky barrier diodes. The noise spectral density reveals 1/f dependence, characteristic of the flicker noise, with superimposed Lorentzian bulges at the intermediate current levels (f is the frequency). The normalized noise spectral density in such diodes was determined to be on the order of 10$^{-12}$ cm$^2$/Hz (f=10 Hz) at 1 A/cm$^2$ current density. At the intermediate current regime, we observed the random telegraph signal noise, correlated with the appearance of Lorentzian bulges in the noise spectrum. The random telegraph signal noise was attributed to the defects near the Schottky barrier. The defects can affect the local electric field and the potential barrier, and correspondingly, impact the electric current. The obtained results help to understand noise in Schottky barrier diodes made of ultra-wide-band-gap semiconductors and can be used for the material and device quality assessment.

cond-mat.mtrl-sci↗

arXiv2022

Properties and device performance of BN thin films grown on GaN by pulsed laser deposition

Wide and ultrawide-bandgap semiconductors lie at the heart of next-generation high-power, high-frequency electronics. Here, we report the growth of ultrawide-bandgap boron nitride (BN) thin films on wide-bandgap gallium nitride (GaN) by pulsed laser deposition. Comprehensive spectroscopic (core level and valence band XPS, FTIR, Raman) and microscopic (AFM and STEM) characterizations confirm the growth of BN thin films on GaN. Optically, we observed that BN/GaN heterostructure is second-harmonic generation active. Moreover, we fabricated the BN/GaN heterostructure-based Schottky diode that demonstrates rectifying characteristics, lower turn-on voltage, and an improved breakdown capability (234 V) as compared to GaN (168 V), owing to the higher breakdown electrical field of BN. Our approach is an early step towards bridging the gap between wide and ultrawide-bandgap materials for potential optoelectronics as well as next-generation high-power electronics.

physics.app-ph↗

arXiv2022

Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications

Room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. The low temperature growth supersedes the requirement of elevated growth temperature accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of functional properties and consequent device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process and demonstrated various functionalities for potential applications. Comprehensive chemical, spectroscopic and microscopic characterization confirms the growth of ordered nanosheet-like hexagonal BN. Functionally, nanosheets show hydrophobicity, high lubricity (low coefficient of friction), low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. Our work unveils an important step that brings a plethora of applications potential for room temperature grown h-BN nanosheets as it can be feasible on any given substrate, thus creating a scenario for h-BN on demand at frugal thermal budget.

physics.app-ph↗

arXiv2021

Low-Frequency Noise Characteristics of GaN Vertical PIN Diodes -- Effects of Current and Temperature

We report low-frequency noise characteristics of vertical GaN PIN diodes, focusing on the effects of the diode design, current and temperature. The as-grown and regrown diodes, with and without surface treatment have been studied. The noise in most of the GaN devices had a characteristic 1/f spectrum at high and moderate currents, while some devices revealed generation-recombination bulges at low currents (f is the frequency). The predominant trend of the noise spectral density, S, dependence on the current was S ~ I. All tested GaN PIN diodes had rather low normalized noise spectral densities of 10^-18 cm2/Hz -- 10^-16 cm2/Hz (f=10 Hz) at the current density J=1 A/cm2 at room temperature. The noise temperature dependences at different currents revealed peaks at T=375 K -- 400 K. Temperature, current, and frequency dependences of noise suggest that the noise mechanism is of the recombination origin. We argue that the noise measurements at low currents can be used to efficiently assess the quality of GaN PIN diodes.

cond-mat.mtrl-sci↗

arXiv2020

Nonlinear nanophotonic devices in the Ultraviolet to Visible wavelength range

Although the first lasers invented operated in the visible, the first on-chip devices were optimized for near-infrared (IR) performance driven by demand in telecommunications. However, as the applications of integrated photonics has broadened, the wavelength demand has as well, and we are now returning to the visible (Vis) and pushing into the ultraviolet (UV). This shift has required innovations in device design and in materials as well as leveraging nonlinear behavior to reach these wavelengths. This review discusses the key nonlinear phenomena that can be used as well as presents several emerging material systems and devices that have reached the UV-Vis wavelength range.

physics.optics↗

arXiv2019

Demonstration of beta-Ga2O3 Optical Waveguides and the Analysis of Their Propagation Losses in the UV-Visible Spectra

This paper reports the first demonstration of beta-phase gallium oxide as optical waveguides on sapphire substrates grown by metal-organic chemical vapor deposition (MOCVD). The propagation losses from visible to ultraviolet spectra were comprehensively studied. By optimizing the fabrication processes, minimum propagation loss was identified to be 3.7 dB/cm at the wavelength of 810 nm, which is comparable to other wide bandgap materials within the III-N family (GaN, AlN). To further reveal the underlying loss mechanisms, several physical mechanisms such as two-photon absorption, sidewall scattering, top surface scattering, and bulk scattering were taken into consideration. The results obtained from this work suggest that beta-Ga2O3 is promising for ultraviolet-visible spectrum integrated photonic applications.

physics.optics↗

arXiv2019

On-chip directional octave-spanning supercontinuum generation from high order mode in near ultraviolet to infrared spectrum using AlN waveguides

On-chip ultraviolet to infrared (UV-IR) spectrum frequency metrology is of crucial importance as a characterization tool for fundamental studies on quantum physics, chemistry, and biology. Due to the strong material dispersion, traditional techniques fail to demonstrate the device that can be applied to generate coherent broadband spectrum that covers the full UV-IR wavelengths. In this work, we explore several novel techniques for supercontinuum generation covering near-UV to near-IR spectrum using AlN micro-photonic waveguides, which is essential for frequency metrology applications: First, to create anomalous dispersion, high order mode (TE10) was adopted, together with its carefully designed high efficiency excitation strategies. Second, the spectrum was broadened by soliton fission through third order dispersion and second harmonic generation, by which directional energy transfer from near-IR to near-UV can be obtained. Finally, high quality single crystalline AlN material was used to provide broadband transparency from UV to IR. Under decently low pulse energy of 0.36 nJ, the experimental spectrum from supercontinuum generation covers from 490 nm to over 1100 nm, with a second harmonic generation band covering from 405 nm to 425 nm. This work paves the way towards UV-IR full spectrum on-chip frequency metrology applications.

physics.optics↗

arXiv2018

A Novel PN junction between Mechanically Exfoliated \b{eta}-Ga2O3 and p-GaN

Several pn junctions were constructed from mechanically exfoliated ultrawide bandgap (UWBG) beta-phase gallium oxide (\b{eta}-Ga2O3) and p-type gallium nitride (GaN). The mechanical exfoliation process, which is described in detail, is similar to that of graphene and other 2D materials. Atomic force microscopy (AFM) scans of the exfoliated \b{eta}-Ga2O3 flakes show very smooth surfaces with average roughness of 0.647 nm and transmission electron microscopy (TEM) scans reveal flat, clean interfaces between the \b{eta}-Ga2O3 flakes and p-GaN. The device showed a rectification ratio around 541.3 (V+5/V-5). Diode performance improved over the temperature range of 25{\deg}C and 200{\deg}C, leading to an unintentional donor activation energy of 135 meV. As the thickness of exfoliated \b{eta}-Ga2O3 increases, ideality factors decrease as do the diode turn on voltages, tending toward an ideal threshold voltage of 3.2 V as determined by simulation. This investigation can help increase study of novel devices between mechanically exfoliated \b{eta}-Ga2O3 and other materials.

physics.app-ph↗

arXiv2017

Effect of crystalline anisotropy on vertical (-201) and (010) beta-Ga2O3 Schottky barrier diodes on EFG single-crystal substrates

Vertical (-201) and (010) beta-Ga2O3 Schottky barrier diodes (SBDs) were fabricated on single-crystal substrates grown by edge-defined film-fed growth (EFG) method. High resolution X-ray diffraction (HRXRD) and atomic force microscopy (AFM) confirmed good crystal quality and surface morphology of the substrates. The electrical properties of both devices, including current-voltage (I-V) and capacitance-voltage (C-V) characteristics, were comprehensively measured and compared. The (-201) and (010) SBDs exhibited on-resistances (Ron) of 0.56 and 0.77 m{\Omega}cm2, turn-on voltages (Von) of 1.0 and 1.3 V, Schottky barrier heights (SBH) of 1.05 and 1.20 eV, electron mobilities of 125 and 65 cm2/(Vs), respectively, with a high on-current of ~1.3 kA/cm2 and on/off ratio of ~109. The (010) SBD had a larger Von and SBH than (-201) SBD due to anisotropic surface properties (i.e., surface Fermi level pinning and band bending), as supported by X-ray photoelectron spectroscopy (XPS) measurements. Temperature-dependent I-V also revealed the inhomogeneous nature of the SBH in both devices, where (-201) SBD showed a more uniform SBH distribution. The homogeneous SBH was also extracted: 1.33 eV for (-201) SBD and 1.53 eV for (010) SBD. The reverse leakage current of the devices was well described by the two-step trap-assisted tunneling model and the one-dimensional variable range hopping conduction (1D-VRH) model. The (-201) SBD showed larger leakage current due to its lower SBH and smaller activation energy. These results indicate the crystalline anisotropy of beta-Ga2O3 can affect the electrical properties of vertical SBDs and should be taken into consideration when designing beta-Ga2O3 electronics.

cond-mat.mtrl-sci↗

arXiv2017

Characterizations of the Nonlinear Optical Properties for (010) and (-201) Beta-phase Gallium Oxide

We report, for the first time, the characterizations on optical nonlinearities of beta-phase gallium oxide (\b{eta}-Ga2O3), where both (010) \b{eta}-Ga2O3 and (-201) \b{eta}-Ga2O3 were examined for two-photon absorption (TPA) coefficient, Kerr refractive index, and their polarization dependence. The wavelength dependence of the TPA coefficient and Kerr refractive index was estimated using a widely used analytical model. \b{eta}-Ga2O3 exhibits a TPA coefficient of 1.2 cm/GW for (010) \b{eta}-Ga2O3 and 0.58 cm/GW for (-201) \b{eta}-Ga2O3. The Kerr refractive index is -2.14*10^(15) cm2/W for (010) \b{eta}-Ga2O3 and -2.89*10^(15) cm2/W for (-201) \b{eta}-Ga2O3. In addition, \b{eta}-Ga2O3 shows stronger nonlinear optical anisotropy on the (-201) plane than on the (010) plane, possibly due to highly asymmetric crystal structure. Compared with that of gallium nitride (GaN), the TPA coefficient of \b{eta}-Ga2O3 is 20 times smaller, and the Kerr refractive index of \b{eta}-Ga2O3 is also found to be 4 to 5 times smaller. These results indicate that \b{eta}-Ga2O3 has the potential for use in ultra-low loss waveguides and ultra-stable resonators and integrated photonics, especially in the UV and visible wavelength spectral range.

physics.app-ph↗