arXiv subjects

Zhicheng Zhang

Publications and source records attributed to Zhicheng Zhang.

115 records · Page 7Linked to original sources

arXiv2020

CT Super Resolution via Zero Shot Learning

Computed Tomography (CT) is an advanced imaging technology used in many important applications. Here we present a deep-learning (DL) based CT super-resolution (SR) method that can reconstruct low-resolution (LR) sinograms into high resolution (HR) CT images. The method synergistically combines a SR model in sinogram domain, a deblur model in image domain, and the iterative framework into a CT SR algorithm super resolution and deblur based iterative reconstruction (SADIR). We incorporated the CT domain knowledge into the SADIR and unrolled it into a DL network (SADIR Net). The SADIR Net is a zero shot learning (ZSL) network, which can be trained and tested with a single sinogram in the test time. The SADIR was evaluated via SR CT imaging of a Catphan700 physical phantom and a biological ham, and its performance was compared to the other state of the art (SotA) DL-based methods. The results show that the zero-shot SADIR-Net can indeed provide a performance comparable to the other SotA methods for CT SR reconstruction, especially in situations where training data is limited. The SADIR method can find use in improving CT resolution beyond hardware limits or lowering requirement on CT hardware.

eess.IV↗

arXiv2020

Noise2Context: Context-assisted Learning 3D Thin-layer Low Dose CT Without Clean Data

Computed tomography (CT) has played a vital role in medical diagnosis, assessment, and therapy planning, etc. In clinical practice, concerns about the increase of X-ray radiation exposure attract more and more attention. To lower the X-ray radiation, low-dose CT is often used in certain scenarios, while it will induce the degradation of CT image quality. In this paper, we proposed a training method that trained denoising neural networks without any paired clean data. we trained the denoising neural network to map one noise LDCT image to its two adjacent LDCT images in a singe 3D thin-layer low-dose CT scanning, simultaneously In other words, with some latent assumptions, we proposed an unsupervised loss function with the integration of the similarity between adjacent CT slices in 3D thin-layer lowdose CT to train the denoising neural network in an unsupervised manner. For 3D thin-slice CT scanning, the proposed virtual supervised loss function was equivalent to a supervised loss function with paired noisy and clean samples when the noise in the different slices from a single scan was uncorrelated and zero-mean. Further experiments on Mayo LDCT dataset and a realistic pig head were carried out and demonstrated superior performance over existing unsupervised methods.

eess.IV↗

arXiv2020

Selective transverse mode emission from all polarization-maintaining fiber lasers

We demonstrated an all polarization-maintaining fiber (PMF) laser which could offer selective transverse mode emission. Offset and cross splicing between PMF sections was used to generate higher order mode and to yield a birefringence induced mode filter. Polarization rotation technique (PRT) was used to select the output beam profile. Both linear cavity and ring cavity were explored. Experimentally, 360° rotating LP11 mode and OAM vortex beam with plus and minus 1 topological charges have been realized from an all PMF linear cavity laser and a ring cavity laser respectively.

physics.optics↗

arXiv2020

Deep Sinogram Completion with Image Prior for Metal Artifact Reduction in CT Images

Computed tomography (CT) has been widely used for medical diagnosis, assessment, and therapy planning and guidance. In reality, CT images may be affected adversely in the presence of metallic objects, which could lead to severe metal artifacts and influence clinical diagnosis or dose calculation in radiation therapy. In this paper, we propose a generalizable framework for metal artifact reduction (MAR) by simultaneously leveraging the advantages of image domain and sinogram domain-based MAR techniques. We formulate our framework as a sinogram completion problem and train a neural network (SinoNet) to restore the metal-affected projections. To improve the continuity of the completed projections at the boundary of metal trace and thus alleviate new artifacts in the reconstructed CT images, we train another neural network (PriorNet) to generate a good prior image to guide sinogram learning, and further design a novel residual sinogram learning strategy to effectively utilize the prior image information for better sinogram completion. The two networks are jointly trained in an end-to-end fashion with a differentiable forward projection (FP) operation so that the prior image generation and deep sinogram completion procedures can benefit from each other. Finally, the artifact-reduced CT images are reconstructed using the filtered backward projection (FBP) from the completed sinogram. Extensive experiments on simulated and real artifacts data demonstrate that our method produces superior artifact-reduced results while preserving the anatomical structures and outperforms other MAR methods.

eess.IV↗

arXiv2020

The Bulk-boundary Correspondence in Non-Hermitian Hopf-link Exceptional Line Semimetals

We consider a 3-dimensional (3D) non-Hermitian exceptional line semimetal model and take open boundary conditions in x, y, and z directions separately. In each case, we calculate the parameter regions where the bulk-boundary correspondence is broken. The breakdown of the bulk-boundary correspondence is manifested by the deviation from unit circles of generalized Brillouin zones (GBZ) and the discrepancy between spectra calculated with open boundary conditions (OBC) and periodic boundary conditions (PBC). The consistency between OBC and PBC spectra can be recovered if the PBC spectra are calculated with GBZs. We use both unit-circle Brillouin zones (BZ) and GBZs to plot the topological phase diagrams. The systematic analysis of the differences between the two phase diagrams suggests that it is necessary to use GBZ to characterize the bulk-boundary correspondence of non-Hermitian models.

cond-mat.mes-hall↗

arXiv2020

A Matlab Toolbox for Feature Importance Ranking

More attention is being paid for feature importance ranking (FIR), in particular when thousands of features can be extracted for intelligent diagnosis and personalized medicine. A large number of FIR approaches have been proposed, while few are integrated for comparison and real-life applications. In this study, a matlab toolbox is presented and a total of 30 algorithms are collected. Moreover, the toolbox is evaluated on a database of 163 ultrasound images. To each breast mass lesion, 15 features are extracted. To figure out the optimal subset of features for classification, all combinations of features are tested and linear support vector machine is used for the malignancy prediction of lesions annotated in ultrasound images. At last, the effectiveness of FIR is analyzed according to performance comparison. The toolbox is online (https://github.com/NicoYuCN/matFIR). In our future work, more FIR methods, feature selection methods and machine learning classifiers will be integrated.

cs.CV↗

arXiv2019

An improved physics model for multi-material identification in photon counting CT

Photon-counting computed tomography (PCCT) with energy discrimination capabilities hold great potentials to improve the limitations of the conventional CT, including better signal-to-noise ratio (SNR), improved contrast-to-noise ratio (CNR), lower radiation dose, and most importantly, simultaneous multiple material identification. One potential way of material identification is via calculation of effective atomic number and effective electron density from PCCT image data. However, the current methods for calculating effective atomic number and effective electron density from PCCT image data are mostly based on semi-empirical models and accordingly are not sufficiently accurate. Here, we present a physics-based model to calculate the effective atomic number and effective electron density of various matters, including single element substances, molecular compounds, and multi-material mixtures as well. The model was validated over several materials under various combinations of energy bins. A PCCT system was simulated to generate the PCCT image data, and the proposed model was applied to the PCCT image data. Our model yielded a relative standard deviations for effective atomic numbers and effective electron densities at less than 1%. Our results further showed that five different materials can be simultaneously identified and well separated in a effective atomic number - effective electron density map. The model could serve as a basis for simultaneous material identification from PCCT.

physics.med-ph↗