Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 0806.4193

Spin polarized transport driven by square voltage pulses in a quantum dot system

F. M. Souza·J. A. Gomez
View original source ↗Read source document ↗Export metadata ↓

Abstract

We calculate current, spin current and tunnel magnetoresistance (TMR) for a quantum dot coupled to ferromagnetic leads in the presence of a square wave of bias voltage. Our results are obtained via time-dependent nonequilibrium Green function. Both parallel and antiparallel lead magnetization alignments are considered. The main findings include a wave of spin accumulation and spin current that can change sign as the time evolves, spikes in the TMR signal and a TMR sign change due to an ultrafast switch from forward to reverse current in the emitter lead.

Explore related subjects

cond-mat.mes-hall

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F. M. Souza, J. A. Gomez. 2008-06-25. Spin polarized transport driven by square voltage pulses in a quantum dot system. https://doi.org/10.1002/pssb.200844312

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Effect of Buried-Interface Preparation for Nb Superconducting Resonators on InP

Substrate surface preparation is a key step in the fabrication of electronic devices. In III--V semiconductor platforms, e.g. used in HEMTs and lasers, removal of the native substrate oxide is extremely important, where improper removal will negatively affect end-of-line device performance. However, the impact of substrate preparation in hybrid superconductor--semiconductor (S--Sm) systems relevant to quantum information applications remains poorly understood. This study compares three surface preparations for the deposition of sputtered Nb films on InP: (i) no intentional oxide removal (control), (ii) \textit{in-situ} $\mathrm{Ar}^{+}$ milling, and (iii) S-passivation. \textit{In-situ} $\mathrm{Ar}^{+}$ milling reduces the O concentration at the metal--substrate (MS) interface, but also roughens the InP surface, increasing the effective thickness of the Nb--InP interface and promoting O incorporation through extended defects in the Nb film. S-passivation suppresses interfacial O more effectively while preserving a sharper and smoother buried interface. It also yields Nb films with higher superconducting transition temperatures and less structural damage than the $\mathrm{Ar}^{+}$-milled samples. Despite these materials improvements, the microwave response is comparable across the three preparations. At single photon powers, the highest internal quality factors, $Q_i$, are approximately $1.30\times10^{5}$ ($130\mathrm{k}$) for the control resonators, $9.7\times10^{4}$ ($97\mathrm{k}$) for the S-passivated resonators, and $8.4\times10^{4}$ ($84\mathrm{k}$) for the $\mathrm{Ar}^{+}$-milled resonators. These results suggest that the present devices are not primarily limited by dielectric loss at the buried Nb--InP interface.

cond-mat.mes-hall↗
arXiv2026

Heating of black-Si by microwaves at 2.45 GHz: effect of nano-needle orientation

Silicon, which is highly reflective and has negligible absorption at the microwave 2.45 GHz range, can be heated when it is turned into black-Si with a surface texture of nano-needles made by SF6/O2 plasma etching. Microwave heating of flat Si and of black-Si with vertical and with tilted (oriented) nano-needles was compared under identical conditions in a cylindrical TM010 resonator. Samples were placed horizontally on a 150-micrometer-thick cover glass, which standardized their height and position inside the cavity and allowed a common calibration of the radiation thermometer against a K-type thermocouple. Under a stepwise protocol of only 2-3-4 W of microwave power (60 s per step), black-Si with vertical needles reached ~ 260 C, systematically exceeding flat Si (~ 190 C), while black-Si with oriented needles showed a delayed but abrupt onset of heating at 3 W. In situ monitoring of the cavity resonance revealed a 2-3 MHz downshift of the resonance frequency f for all samples, with the drift consistently appearing once the sample temperature exceeded ~ 120 - 150 C, consistent with thermally activated carrier generation in Si. At a given temperature, each sample loads the cavity at a different f and quality factor Q, indicating an orientation-dependent effective permittivity of the nano-needle array, in line with the strong form birefringence of tilted black-Si. Application potential and challenges in the quantitative temperature and permittivity determination are discussed.

cond-mat.mes-hall↗
arXiv2026

Converting $PT$-Symmetric Topological Classes by Floquet Engineering

Going beyond the conventional classification rule of Altland-Zirnbauer symmetry classes, $PT$ symmetric topological phases are classified by $(PT)^2=1$ or $-1$. The interconversion between the two $PT$-symmetric topological classes is generally difficult due to the constraint of $(PT)^2$. Here, we propose a scheme to control and interconvert the $PT$-symmetric topological classes by Floquet engineering. We find that it is the breakdown of the $\mathbb{Z}_2$ gauge, induced by the $π$ phase difference between different hopping rates, by the periodic driving that leads to such an interconversion. Relaxing the system from the constraint of $(PT)^2$, rich exotic topological phases, e.g., the coexisting $PT$-symmetric first-order real Chern insulator and second-order topological insulators not only in different quasienergy gaps, but also in one single gap, are generated. In contrast to conventional Floquet topological phases, our result provides a way to realize exotic topological phases without changing symmetries. It enriches the family of topological phases and gives an insightful guidance for the development of multifunctional quantum devices.

cond-mat.mes-hall↗