High-energy ball milling and synthesi temperature study to improve superconducting properties of MgB2 ex-situ tapes and wires

Gennaro Romano; Maurizio Vignolo; Valeria Braccini; Cristina Bernini; Andrea Malagoli; Matteo Tropeano; Carlo Fanciulli; Marina Putti; Carlo Ferdeghini

doi:10.1109/tasc.2009.2019133

arXiv · 0810.2438

High-energy ball milling and synthesi temperature study to improve superconducting properties of MgB2 ex-situ tapes and wires

Gennaro Romano·Maurizio Vignolo·Valeria Braccini·Cristina Bernini·Andrea Malagoli·Matteo Tropeano·Carlo Fanciulli·Marina Putti·Carlo Ferdeghini

View original source ↗Read source document ↗Export metadata ↓

Abstract

MgB2 monofilamentary nickel-sheated tapes and wires were fabricated by means of the ex-situ powder-in-tube method using either high-energy ball milled and low temperature synthesized powders. All sample were sintered at 920 C in Ar flow. The milling time and the revolution speed were tuned in order to maximize the critical current density in field (Jc): the maximum Jc value of 6 x 10e4 A/cm2 at 5 K and 4 T was obtained corresponding to the tape prepared with powders milled for 144h at 180rpm. Vorious synthesis temperature were also investigated (730-900 C) finding a best Jc value for the wire prepared with powders synthesized at 745 C. We speculate that this optimal temperature is due to the fluidifying effect of unreacted magnesium content before the sintering process which could better connect the grains.

Explore related subjects

cond-mat.supr-con cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Gennaro Romano, Maurizio Vignolo, Valeria Braccini, Cristina Bernini, Andrea Malagoli, Matteo Tropeano, Carlo Fanciulli, Marina Putti, Carlo Ferdeghini. 2008-10-14. High-energy ball milling and synthesi temperature study to improve superconducting properties of MgB2 ex-situ tapes and wires. https://doi.org/10.1109/tasc.2009.2019133

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Out-of-equilibrium relaxation dynamics of the superconducting order parameter in CsV$_3$Sb$_5$

The application of a time-varying strain field drives a superconducting order parameter out of equilibrium. How the order parameter relaxes back to equilibrium depends both on the structure of the superconducting gap and on the nature of quasiparticle scattering. We report the discovery of an ultrasonic attenuation peak inside the superconducting state of the kagome superconductor CsV$_3$Sb$_5$. This peak is the natural consequence of the order parameter relaxation time matching the ultrasonic drive frequency near $T_{\rm c}$. From the measured frequency dependence of the peak, we extract a microscopic scattering time of $\tau_N = 25$ ps. This timescale is two orders of magnitude longer than the elastic scattering time as determined by resistivity measurements, but is comparable to the inelastic scattering time determined by thermal transport. Within the conventional framework of order-parameter relaxation, this implies that elastic scattering is ineffective at relaxing the superconducting condensate, consistent with a sign-preserving $s$-wave state obeying Anderson's theorem.

cond-mat.supr-con↗

arXiv2026

Eight-unit-cell electronic modulations in cuprates originating from local molecular orbitals

The pair density wave (PDW) state with eight-unit-cell (8a0) periodicity has been widely regarded as the primary order in cuprates, yet its existence and origin remain subjects of intense debate. Using spectroscopic imaging scanning tunneling microscopy, we observe spatial modulations of the electronic states with approximately 8a0 periodicity in both the superconducting and insulating regimes of hole-doped Ca2CuO2Cl2 cuprate. We find that the 8a0 spatial patterns are generated by the formation of molecular orbitals by doped holes, which organize into 4a0*4a0 plaquettes as the basic unit. Our results identify the 4a0 molecular orbital as the fundamental electronic building block in cuprates, while the 8a0 PDW represents a spatial subharmonic that emerges at sufficiently high doping.

cond-mat.supr-con↗

arXiv2026

Record-Breaking Elemental Superconductivity in Tetralayer Kagome Borophene

Superconductivity above the liquid-nitrogen temperature remains rare in two-dimensional elemental crystals, where strong covalent bonding often yields high phonon frequencies but insufficient electron-phonon coupling. Here, using first-principles calculations and fully anisotropic Migdal-Eliashberg theory, we predict tetralayer kagome borophene (TKB) stabilized by ABAB covalent stacking, as a liquid-nitrogen-temperature elemental superconductor. With a predicted critical temperature of 102 K, TKB sets a record-high value among previously reported elemental superconductors. Unlike known high-Tc boron-based superconductors dominated by in-plane sigma-bonding states and high-frequency in-plane B-B stretching modes, TKB realizes an out-of-plane s-pz-bonding-mediated pairing mechanism, in which interlayer s-pz bonding states at the Fermi level are strongly coupled to low-frequency out-of-plane vibrations of boron atoms. These results reveal a distinct out-of-plane pairing channel in multilayer borophene and establish covalent stacking engineering as a potential route for high-Tc superconductivity in two-dimensional materials.

cond-mat.supr-con↗