Search arXivSearch

arXiv · 1710.06400

Direct Measurement of Interparticle Forces of Titan Aerosol Analogs ("Tholin") Using Atomic Force Microscopy

Abstract

To understand the origin of the dunes on Titan, it is important to investigate the material properties of Titan's organic sand particles on Titan. The organic sand may behave distinctively compared to the quartz/basaltic sand on terrestrial planets (Earth, Venus, Mars) due to differences in interparticle forces. We measured the surface energy (through contact angle measurements) and elastic modulus (through Atomic Force Microscopy, AFM) of the Titan aerosol analog (tholin). We find the surface energy of a tholin thin film is about 70.9 mN/m and its elastic modulus is about 3.0 GPa (similar to hard polymers like PMMA and polystyrene). For two 20 $μ$m diameter particles, the theoretical cohesion force is therefore 3.3 $μ$N. We directly measured interparticle forces for relevant materials: tholin particles are 0.8$\pm$0.6 $μ$N, while the interparticle cohesion between walnut shell particles (a typical model materials for the Titan Wind Tunnel, TWT) is only 0.4$\pm$0.1 $μ$N. The interparticle cohesion forces are much larger for tholins and presumably Titan sand particles than materials used in the TWT. This suggests we should increase the interparticle force in both analog experiments (TWT) and threshold models to correctly translate the results to real Titan conditions. The strong cohesion of tholins may also inform us how the small aerosol particles ($\sim$1 $μ$m) in Titan's atmosphere are transformed into large sand particles ($\sim$200 $μ$m). It may also support the cohesive sand formation mechanism suggested by Rubin and Hesp (2009), where only unidirectional wind is needed to form linear dunes on Titan.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xinting Yu, Sarah M. Hörst, Chao He, Patricia McGuiggan, Nathan T. Bridges. 2017-10-18. Direct Measurement of Interparticle Forces of Titan Aerosol Analogs ("Tholin") Using Atomic Force Microscopy. https://doi.org/10.1002/2017je005437

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bridging magnetothermal winds and photoevaporation to model discs dispersal

Protoplanetary disc dispersal is driven by two processes usually modelled separately: photoevaporative and magnetohydrodynamic (MHD) disc winds. Global simulations indicate that in the inner disc these are not distinct outflows but a single magnetothermal wind. We assemble a closed-form, two-phase model that respects it. A single-field-line wind, whose base is fixed by the irradiated temperature and penetration column, supplies the launch and feeds a secular evolution, with photoevaporation convolved on as a sink. The flux closure $B_z\proptoΣ^q$ is self-limiting: for $q\le1/2$ depletion alone cannot demagnetise the disc, so dispersal requires independent flux loss, parameterised by the magnetic Reynolds number $\mathcal{R}_m$. Integrating the coupled system yields two regimes. Efficient flux loss ($\mathcal{R}_m\lesssim1$) lets the magnetisation front recede by over an order of magnitude and opens a photoevaporative gap. Flux retention ($\mathcal{R}_m\gg1$) drives the front outward, sustains accretion, and defers dispersal by $\approx2.7$~Myr. Deriving the base from stellar irradiation instead of prescribing it, we find that the cold-launch approximation is valid during the early stages of disc evolution: anchoring the base at plasma equipartition ($β_{\rm base} \sim 1$) confines irradiation's influence on the magnetic lever arm to the magnetothermal annulus, decoupling the peak accretion rate from the incident flux. Both regimes clear the disc inside-out, through either a photoevaporatively amplified cavity wall or an expanding magnetothermal front.

astro-ph.EP

Faithful Neural Embeddings for 3D Exoplanet Climate Modeling

With the rapid advancement of telescopes like JWST and Ariel, there is an urgent need for efficient 3D climate models to interpret observations of exoplanet atmospheres. Traditional 3D general circulation models (GCMs) are computationally intensive, prompting the development of machine learning (ML) emulators to accelerate simulations. Recent work, such as that by Plaschzug et al. 2026 \cite{plaschzug2026accelerating}, uses a dense neural network (DNN) to predict local gas temperatures and winds from input parameters, including local gas pressure, spatial coordinates (longitude and latitude), and global temperature. However, this model relies on predicting individual temperature values (points) at specific grid points, which can be limited by the resolution and constraints of the training grid. In this work, we investigate a couple of alternative frameworks based on latent-space representations of local gas temperature ($\text{T}_{\text{gas}}$) to obtain a faithful, low-dimensional representation of these profiles. This represents the first step toward developing a latent space regression model, offering a structurally cohesive alternative to the existing point-wise prediction method \cite{plaschzug2026accelerating}. By capturing the optimal embedding space of atmospheric data, our proposed framework can produce simulated profiles while maintaining computational efficiency, making it suitable for large-scale exoplanet ensemble studies.

astro-ph.EP

Some challenges for the long-term survival of Naiad, Neptune's innermost moon

The Naiad-Thalassa 73:69 mean-motion resonance implies these moons have co-existed for $\gtrsim$1 Gyr, raising the question of how they survived to the present day. We examine three challenges to Naiad's long-term survival: tidal disruption, heliocentric bombardment, and runaway collisional erosion by planetocentric debris. We constrain Naiad's internal strength requirements from its nominal density and shape, compute present-day impact rates on Neptune's inner moons from heliocentric bombardment, and use $N$-body simulations to model the fate of ejecta produced by non-disruptive impacts. First, Naiad's nominal density of ${\sim}0.8\text{ g cm}^{-3}$ and elongated shape suggest it cannot be held together by self-gravity alone, implying a cohesive strength of $\gtrsim10$ kPa to avoid tidal disruption, although this constraint is relaxed if Naiad has a higher density of ${\gtrsim}1.3\text{ g cm}^{-3}$. Second, we show that Naiad may have been disrupted in the last 1 Gyr by heliocentric bombardment, although this depends sensitively on the size-frequency distribution of Kuiper Belt objects at small sizes and on Naiad's catastrophic disruption threshold, both of which are poorly constrained. Third, and most notably, we find that even small, non-disruptive impacts can trigger runaway collisional erosion by planetocentric debris on extremely short timescales. Avoiding this ``sesquinary catastrophe'' requires that Naiad has a collisional strength of at least several MPa, which is difficult to reconcile with being a reaccumulated ``rubble pile'', leftover from the capture of Triton and the subsequent cataclysm of Neptune's primordial satellite system. Together, these results suggest that Naiad may be a physically unusual object among small ring-moons -- possibly a largely coherent, monolithic fragment -- and that our understanding of Neptune's inner satellite system leaves much to be explained.

astro-ph.EP