Search arXiv⌕ Search

arXiv · 1809.02102

Stress relaxation in a dilute bacterial suspension: The active-passive transition

Abstract

We analyse the time dependent non-linear rheology of a dilute bacterial suspension (e.g. E. coli) for a pair of impulsively started linear flows - simple shear and uniaxial extension. The rheology is governed by the bacterium orientation distribution which satisfies a kinetic equation that includes rotation by the imposed flow, and relaxation to isotropy via rotary diffusion and tumbling. The relevant dimensionless parameters are the Peclet number $Pe\equiv \dotγτ$, which dictates the importance of flow-induced orientation anisotropy, and $τD_r$, which quantifies the relative importance of the two intrinsic orientation decorrelation mechanisms (tumbling and rotary diffusion). Here, $τ$ is the mean run duration of a bacterium that exhibits a run-and-tumble dynamics, $D_r$ is the intrinsic rotary diffusivity of the bacterium and $\dotγ$ is the characteristic magnitude of the imposed velocity gradient. The solution of the kinetic equation is obtained numerically using a spectral Galerkin method, and yields the relevant rheological properties over the entire range of $Pe$. For simple shear, the stress relaxation predicted by our analysis at small $Pe$ is in good agreement with the experimental observations of Lopez et al. (2015). However, the analysis at large $Pe$ yields relaxations that are qualitatively different. The rheological response in the experiments corresponds to a transition from a nearly isotropic suspension of active swimmers at small $Pe$, to an apparently (nearly) isotropic suspension of passive rods at large $Pe$. In contrast, the computations yield the expected transition to a nearly flow-aligned suspension of passive rigid rods at high $Pe$. We probe this active-passive transition systematically, complementing the numerical solution with analytical solutions obtained from perturbation expansions about appropriate base states.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sankalp Nambiar, Phanikanth S, Nott P. R., Ganesh Subramanian. 2018-09-06. Stress relaxation in a dilute bacterial suspension: The active-passive transition. https://doi.org/10.1017/jfm.2019.278

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Adjoint-based shape optimization of a ship hull using a Conditional Variational Autoencoder (CVAE) assisted propulsion surrogate model

Adjoint-based shape optimization of ship hulls is a powerful tool for addressing high-dimensional design problems in naval architecture, particularly in minimizing the ship resistance. However, its application to vessels that employ complex propulsion systems introduces significant challenges. They arise from the need for transient simulations extending over long periods of time with small time steps and from the reverse temporal propagation of the primal and adjoint solutions. These challenges place considerable demands on the required storage and computing power, which significantly hamper the use of adjoint methods in the industry. To address this issue, we propose a machine learning-assisted optimization framework that employs a Conditional Variational Autoencoder-based surrogate model of the propulsion system. The surrogate model replicates the time-averaged flow field induced by a Voith Schneider Propeller and replaces the geometrically and time-resolved propeller with a data-driven approximation. Primal flow verification examples demonstrate that the surrogate model achieves significant computational savings while maintaining the necessary accuracy of the resolved propeller. Optimization studies demonstrate that neglecting the propulsion system can result in hull designs whose performance is inferior to that of the initial shape when subsequently validated using a numerically resolved propulsor. In contrast, the proposed method produces shapes that actually achieve more than an 8% reduction in resistance.

physics.flu-dyn↗

Control of deterministic breakdown to turbulence of hypersonic boundary layer with spanwise non-uniform surface temperature

Direct Numerical Simulation (DNS) of a Mach 6 boundary layer over a flat plate is performed to assess the effect of spanwise non-uniform surface temperature on breakdown to turbulence under deterministic forcing. The streamwise location of laminar to turbulent transition in hypersonic boundary layers has a significant influence on viscous drag and aerodynamic heating of external surfaces of hypersonic vehicles. Previous work investigated the stabilization of hypersonic boundary layers by optimally growing streaks. More recently, DNS for a hypersonic boundary layer showed that it is possible to generate streaks through a spanwise non-uniform surface temperature distribution. The laminar computations showed the control method can stabilize the second Mack mode and it is robust across a range of Mach numbers and wall temperature ratios. In this work, two scenarios are investigated where two-dimensional (second Mack mode) and oblique (first Mack mode) disturbances dominate the initial linear stage of transition. It is found that weak control streaks with amplitude below 5% of the freestream velocity can reduce high-frequency shear-stress due to the second Mack mode by approximately 30% relative to the uncontrolled configuration, and delay transition. For first Mack mode dominated breakdown, the control streaks have no effect on transition location, but the peak amplitude of the spanwise-integrated wall heat flux is reduced. For the first and second Mack mode-dominated scenarios, the mean and high-frequency peak heat transfer are reduced approximately by 15% and 34%, respectively. The dominant mechanisms are identified and attributed to the pressure work contribution to turbulent kinetic energy and the second Mack mode dilatation work.

physics.flu-dyn↗

Comment on "Note on the start-up of Couette flow for viscoelastic fluids" [Phys. Fluids 35, 113108 (2023)]

I show that the initial conditions imposed by Balan [Phys. Fluids 35, 113108 (2023)] are incompatible with a nonzero retardation time, so that the problem solved is not impulsive start-up, but, as I prove exactly, the start-up of a plate ramped as $1 - \mathrm{e}^{-t/λ_2}$ on the retardation timescale $λ_2$ (a material parameter, not a setting in a rheometer). Values digitized from that paper's viscoelastic figures fall on the ramped-plate solution, not on Tanner's start-up solution. The large negative wall normal stress reported for the corotational model is a grid-dependent artifact due to the same error in the initial data. An open-source code repository provides annotated notebooks reproducing every figure and number in this Comment.

physics.flu-dyn↗