Hydraulic-Assist Driver for Compact Insertion Devices

Abstract

We have developed and tested a novel type of driver for insertion devices. In our approach, we compensate for the magnetic forces acting on the insertion device (ID) arrays by installing a number of compact hydraulic cylinders along the ID. These assisting cylinders are connected to a single hydraulic line and activated by the same pressure. A computer-controlled closed-loop feedback system maintains the target ID array position and an acceptable load on the mechanical driver. This is accomplished by simultaneously controlling both the hydraulic assist pressure and the mechanical driver position. The quantity and location of the compact hydraulic cylinders are optimized to keep the deformation of ID structural components in an acceptable range. The hydraulic cylinders compensate for over 90% of the strong forces generated by the magnetic field. This reduces the load applied to a conventional mechanical driver to less than 10% of the total load. The implementation of this type of driver can make insertion devices much more compact without compromising their performance In the proof-of-concept experiments, our novel hydraulic-assist driver demonstrated a long-term stability and reproducibility of the ID gap within 2 microns. Magnetic field stability and reproducibility was within 6e-5 of the normalized field strength or better. Here we will describe the concept, details of our test setup and the results of the proof-of-concept experiments. We will also discuss the advantages of the hydraulic-assist driver over conventional mechanical drivers, as well as possible applications and future developments.