Carbon nanotube/metal corrosion issues for nanotube coatings and inclusions in a matrix

Farhad Daneshvar

Home/Archive/arXiv

arXiv · 1812.03815

Carbon nanotube/metal corrosion issues for nanotube coatings and inclusions in a matrix

Farhad Daneshvar

View original source ↗Read source document ↗Export metadata ↓

Abstract

Corrosion is an inevitable phenomenon that is inherent in metals and even though there has been significant research on this subject, no ideal protection has been discovered to fully prevent corrosion. However, methods such as using protective coatings, and modifying the structure or composition of the material have been used to slow down gradual corrosion and fortunately they proved to be quite beneficial. The research focus has shifted to integrating novel materials and structures to improve the corrosion resistance of composites. Carbon nanotubes (CNTs) are an attractive and promising filler due to their chemical inertness and high mechanical, electrical, and thermal properties. CNTs can fill the gaps of metals and polymer-based composites by forming a passive layer on metals and promoting sacrificial protection in zinc rich polymer (ZRP) coatings, and can therefore function as an anti-corrosion filler. This paper reviews the research that has been performed to better understand the influence of CNTs on corrosion resistance in composites. Accordingly, in metal matrix composites (MMCs), most of the work has been carried out on electrodeposited coatings, namely Ni-based-CNT composites, which show improved corrosion resistance by CNT addition. On the other hand, there are a few papers that have studied the corrosion resistance of Mg-based-CNT composites and their corrosion results contradict those obtained from other metal-CNT composites. For ZRPs or polymer-based coatings there are a few papers that studied the effect of CNTs on the corrosion of said composites. It is believed that CNTs can strengthen the adhesion between the coating and the substrate and facilitate sacrificial protection by Zn particles by forming a conductive network, hence the improved corrosion resistance.

Explore related subjects

physics.app-ph cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Farhad Daneshvar. 2018-11-03. Carbon nanotube/metal corrosion issues for nanotube coatings and inclusions in a matrix. https://arxiv.org/abs/1812.03815

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Janus Dipoles: Fundamentals, Realizations, and Emerging Applications

The Janus dipole - featuring orthogonally oriented electric and magnetic dipoles with a 90-degree phase difference - has emerged as a powerful paradigm for wave manipulation. Unlike traditional Huygens dipoles used for directional control, this unique configuration exhibits strongly asymmetric, face-selective near-field behavior while maintaining a quasi-isotropic far-field radiation pattern. These remarkable properties make the Janus dipole an essential platform for directional wave shaping, with wide-ranging applications in on-chip photonics, quantum interactions, and wireless power transfer. This review systematically traces the rapid development of the Janus dipole from its foundational theoretical inception to its diverse implementation platforms across optical, microwave, and acoustic frequencies. In this paper, we explore the governing principles, classify realization strategies into passive Janus dipoles, active Janus dipoles, and advanced near-field coupling control, and highlight emerging frontiers. By bridging foundational electrodynamics with advanced device engineering, this paper serves as an essential reference and roadmap for researchers designing next-generation, highly integrated, and compact wave-manipulation systems.

physics.app-ph↗

arXiv2026

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph↗

arXiv2026

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph↗