Search arXivSearch

arXiv · 1906.11087

Intermixed Cation-Anion Aqueous Battery Based on an Extremely Fast and Long-Cycling Di-Block Bipyridinium-Naphthalene Diimide Oligomer

Abstract

Aqueous batteries, particularly those integrating organic active materials functioning in a neutral pH environment, stand out as highly promising contenders in the stationary electrochemical storage domain, owing to their unparalleled safety, sustainability and low-cost materials. Herein, a novel di-block oligomer (DNVBr), serving as the negative electrode of an all-organic aqueous battery, is shown to offer exceptional output capabilities. The battery's performance is further enhanced by a unique intermixed p/n-type storage mechanism, which is able to simultaneously exchange light and naturally abundant Na+, Mg2+ and Cl-. Reaching up to 105 mAh/g, this system shows remarkable capacity retention for several thousand cycles (6500 cycles, ~40 days) in various neutral electrolytes, including raw ocean water (~3000 cycles, ~75 days). The surprisingly fast kinetics of this di-block oligomer allow to attain an unmatched specific capacity of near to 60mAh/g electrode while entirely devoid of conducting additives, and more than 80mAh/g electrode with 10% carbon additive, as well as displaying an areal capacity as high as 3.4mAh/cm2 at C rate. Full cell validation was demonstrated over 1600 cycles by virtue of a commercial TEMPO molecule, which permitted an energy density of close to 40Wh/kgmaterials at C rate in a self-pH-buffered and inexpensive aqueous electrolyte.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sofia Perticarari, Tom Doizy, Patrick Soudan, Chris Ewels, Camille Latouche, Dominique Guyomard, Fabrice Odobel, Philippe Poizot, Joel Gaubicher. 2019-06-26. Intermixed Cation-Anion Aqueous Battery Based on an Extremely Fast and Long-Cycling Di-Block Bipyridinium-Naphthalene Diimide Oligomer. https://doi.org/10.1002/aenm.201803688

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

RCS angular control with gradient metasurfaces: design and measurement

This letter proposes the design and measurement of a periodic metasurface that achieves anomalous reflection with reduced RCS in a given parasitic direction. A previous study proposed a semi-analytical model to predict the RCS behavior of such a metasurface. However, this first study did not include any experimental exploration to verify the theoretical results. To complete this study, this work presents an experimental validation of the proposed design, with a focus on manufacturing and measurement issues. The synthesis, design specifications, fabrication method and experimental setup are presented and discussed. Measurement results are also examined in detail, highlighting some limitations in metasurfaces RCS measurements. The proposed metasurface effectively achieves the predicted RCS level reduction in the considered parasitic direction. The agreement between simulation and experimental results demonstrates the accuracy of the modelling and the efficiency of the optimisation procedure.

physics.app-ph

Maximum-Power-Transfer Power Coordinates for Fully Coupled Multiport Thévenin Sources

A power-normalized scattering representation is developed at a fixed frequency for a passive linear time-invariant multiport load driven by a fully coupled multiport Thévenin source. The source is obtained by reducing, at the load reference planes, an independent-source network whose suppressed internal impedance is passive, together with an intervening passive matching network. No diagonal-reference, uncoupled-source-channel, reciprocity, or commutation assumption is required. With $R_s=\mathrm{Herm}\{Z_s\}\succ\mathbf{0}$, completing the square in accepted power identifies the available-power current and motivates the coordinates $\mathbf{a}=\frac12R_s^{-1/2}(\mathbf{V}+Z_s\mathbf{I})$, $\mathbf{b}=\frac12R_s^{-1/2}(\mathbf{V}-Z_s^H\mathbf{I})$. They satisfy $\|\mathbf{a}\|_2^2-\|\mathbf{b}\|_2^2=\Re\{\mathbf{I}^H\mathbf{V}\}$ and yield $\mathbf{S}=R_s^{-1/2}(Z_{load}-Z_s^H)(Z_{load}+Z_s)^{-1}R_s^{1/2}$. An exact operator identity establishes passivity--contractivity equivalence and gives excitation-specific, reachable-subspace, and complete conjugate-matching conditions. On the physically reachable incident subspace, singular values characterize the best- and worst-case source-normalized port-reflection TARC, while a restricted Frobenius norm gives the basis-averaged squared TARC. Equal-magnitude phase-only control is formulated separately as a constant-modulus problem, with generator-side constraints mapped through the coupled source network before power normalization. For antenna loads and excitations with $P_{acc}>0$, $P_{rad}/P_{av}=η_{rad}(1-\mathrm{TARC}^2)$, so terminal scattering data alone do not determine radiation efficiency. When $R_s$ is singular, finite available power exists exactly for $\mathbf{E}\in\mathrm{range}(R_s)$, and the construction applies on the positive-resistance support.

physics.app-ph

Bimorph Lithium Niobate Thickness-Shear Overtone Film Bulk Acoustic Resonator

High quality factor ($Q$) and overtone operation enable narrow-linewidth acoustic devices with multiple discrete frequencies in a single cavity. Maintaining both high $Q$ and sufficient electromechanical coupling at higher mode orders remains challenging. Here, we demonstrate a bimorph periodically poled piezoelectric film (P3F) lithium niobate (LN) platform for high-order thickness-shear (TS) overtone excitation. The device comprises a bonded 80-$μ$m-thick single-crystal X-cut LN bimorph with opposite polarizations, patterned top and floating bottom electrodes, and a suspended air cavity. The P3F configuration mitigates charge cancellation from the alternating stress distribution of higher-order TS modes, enabling measurable coupling across a broad sequence of overtones. The thick LN acoustic cavity and increasingly confined high-order mode profiles support low-loss operation. Measured TS overtones extend to 1.75 GHz. At room temperature, representative overtones at 0.77 and 0.89 GHz exhibit 3-dB $Q$ values of 11,338 and 11,917, corresponding to $fQ$ products of $8.74\times10^{12}$ and $1.06\times10^{13}$ Hz, respectively. Cooling from 297 to 12 K systematically enhances $Q$, yielding a peak 3-dB $Q$ of 20,507 at 779 MHz and a maximum $fQ$ product of $1.98\times10^{13}$ Hz at 1.379 GHz. These results establish bimorph P3F LN as a promising platform for high-$Q$, frequency-scalable micro-acoustic resonators in the sub-GHz and low-GHz regimes.

physics.app-ph