Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 1912.01495

Reduction of Spikes on the Sides of Patterned Thin Films for Magnetic Tunnel Junction Based Molecular Device Fabrication

Pawan Tyagi·Edward Friebe·Beachrhell Jacques·Tobias Goulet·Stanley Travers
View original source ↗Read source document ↗Export metadata ↓

Abstract

Sputter thin film deposition after photolithography often produces unwanted spikes along the side edges. These spikes are a significant issue for the development of magnetic tunnel junction (MTJ)-based memory and molecular spintronics devices, microelectronics, and micro-electro-mechanical systems because they influence the properties of the other films deposited on the top. Our molecular spintronics devices that utilize MTJ as the testbed are almost short-lived and encountered high background current that masked the effect of molecular transport channels placed along the sides of MTJs. Therefore, tapered thin film edges are critically needed in devices. Here, we report a very cost-efficient and fast way of creating an optimum photoresist profile for the production of spike-free patterned films. This approach is based on performing a soaking in the photoresist developer after baking and before the UV exposure. However, the success of this method depends on multiple factors accounted for during photolithography - photoresist thickness (spin speed), baking temperature, soaking time and exposure time. Our recent experiments systematically studied the effect of these factors by following the L9 experimental scheme of the Taguchi Design of the experiment (TDOE). We discovered that baking temperature was the most influential parameter; presoak time and photoresist thickness were two other influential factors; exposure time was the least effective factor. We also found that 4000 rpm, 100 C soft baking, 60 s soaking, and 15 s UV exposure yielded the best results. Finally, the paper also discusses the interdependence of selected factors, and the impact of the individual levels of each factor. This study is expected to benefit MEMS and micro/nanoelectronics device researchers because it attempts at finding a cheaper and faster alternative to creating an optimum photoresist profile.

Explore related subjects

physics.app-phcond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pawan Tyagi, Edward Friebe, Beachrhell Jacques, Tobias Goulet, Stanley Travers. 2019-12-03. Reduction of Spikes on the Sides of Patterned Thin Films for Magnetic Tunnel Junction Based Molecular Device Fabrication. https://doi.org/10.1557/adv.2017.456

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph↗
arXiv2026

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph↗
arXiv2026

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph↗