A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids

Chen Li; Huilong Zhu; Yongkui Zhang; Xiaogen Yin; Kunpeng Jia; Junjie Li; Guilei Wang; Zhenzhen Kong; Anyan Du; Tengzhi Yang; Liheng Zhao; Lu Xie; Xuezheng Ai; Shishuai Ma; Yangyang Li; Henry H. Radamson

arXiv · 2003.03529

A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids

Chen Li·Huilong Zhu·Yongkui Zhang·Xiaogen Yin·Kunpeng Jia·Junjie Li·Guilei Wang·Zhenzhen Kong·Anyan Du·Tengzhi Yang·Liheng Zhao·Lu Xie·Xuezheng Ai·Shishuai Ma·Yangyang Li·Henry H. Radamson

View original source ↗Read source document ↗Export metadata ↓

Abstract

A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+ Si and Si0.7Ge0.3 using the combinations of HNO3 oxidation and BOE oxide removal processes were studied. Experiments showed that oxidation saturates with time due to low activation energy. A physical model was presented to describe the wet oxidation process with nitric acid. The model was calibrated with experimental data and the oxidation saturation time, final oxide thickness, and selectivity between Si0.7Ge0.3 and p+ Si were obtained. The digital etch of laminated Si0.7Ge0.3/p+ Si was also investigated. The depth of the tunnels formed by etching SiGe layers between two Si layers was found in proportion to digital etching cycles. And oxidation would also saturate and the saturated relative etched amount per cycle (REPC) was 0.5 nm (4 monolayers). A corrected selectivity calculation formula was presented. The oxidation model was also calibrated with Si0.7Ge0.3/p+ Si stacks, and selectivity from model was the same with the corrected formula. The model can also be used to analyze process variations and repeatability. And it could act as a guidance for experiment design. Selectivity and repeatability should make a trade-off.

Explore related subjects

physics.app-ph cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Chen Li, Huilong Zhu, Yongkui Zhang, Xiaogen Yin, Kunpeng Jia, Junjie Li, Guilei Wang, Zhenzhen Kong, Anyan Du, Tengzhi Yang, Liheng Zhao, Lu Xie, Xuezheng Ai, Shishuai Ma, Yangyang Li, Henry H. Radamson. 2020-03-07. A Study of Selectively Digital Etching Silicon-Germanium with Nitric and Hydrofluoric Acids. https://arxiv.org/abs/2003.03529

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗