Search arXiv⌕ Search

arXiv · 2004.01051

Dynamics of laminar and transitional flows over slip surfaces: effects on the laminar-turbulent separatrix

Abstract

The effect of slip surfaces on the laminar-turbulent separatrix of plane Poiseuille flow is studied by direct numerical simulation. Turbulence lifetimes, the likelihood that turbulence is sustained, is investigated for transitional flows with various slip lengths. Slip surfaces decrease the likelihood of sustained turbulence compared to the no-slip case, and likelihood is further decreased as slip length is increased. A deterministic analysis of the effects of slip surfaces on transition to turbulence is performed using nonlinear traveling wave solutions to the Navier-Stokes equations, also known as exact coherent solutions. Two solution families, dubbed P3 and P4, are used since their lower-branch solutions are embedded on the boundary of the basin of attraction of laminar and turbulent flows (Park & Graham 2015). Additionally, they exhibit distinct flow structures -- the P3 and P4 are denoted as core mode and critical layer mode, respectively. Distinct effects of slip surfaces on the solutions are observed by the skin friction evolution, linear growth rate, and phase-space projection of transitional trajectories. The slip surface modifies transition dynamics little for the core mode, but considerably for the critical layer mode. Most importantly, the slip surface promotes different transition dynamics -- early and bypass-like transition for the core mode and delayed and H-/K-type-like transition for the critical layer mode. Based on spatiotemporal and quadrant analyses, it is found that slip surfaces promote the prevalence of strong wall-toward motions (sweep-like events) near vortex cores close to the channel centre, inducing an early transition, while sustained ejection events are present in the region of the $Λ$-shaped vortex cores close to the critical layer, resulting in a delayed transition.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ethan A. Davis, Jae Sung Park. 2020-04-02. Dynamics of laminar and transitional flows over slip surfaces: effects on the laminar-turbulent separatrix. https://doi.org/10.1017/jfm.2020.282

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Adjoint-based shape optimization of a ship hull using a Conditional Variational Autoencoder (CVAE) assisted propulsion surrogate model

Adjoint-based shape optimization of ship hulls is a powerful tool for addressing high-dimensional design problems in naval architecture, particularly in minimizing the ship resistance. However, its application to vessels that employ complex propulsion systems introduces significant challenges. They arise from the need for transient simulations extending over long periods of time with small time steps and from the reverse temporal propagation of the primal and adjoint solutions. These challenges place considerable demands on the required storage and computing power, which significantly hamper the use of adjoint methods in the industry. To address this issue, we propose a machine learning-assisted optimization framework that employs a Conditional Variational Autoencoder-based surrogate model of the propulsion system. The surrogate model replicates the time-averaged flow field induced by a Voith Schneider Propeller and replaces the geometrically and time-resolved propeller with a data-driven approximation. Primal flow verification examples demonstrate that the surrogate model achieves significant computational savings while maintaining the necessary accuracy of the resolved propeller. Optimization studies demonstrate that neglecting the propulsion system can result in hull designs whose performance is inferior to that of the initial shape when subsequently validated using a numerically resolved propulsor. In contrast, the proposed method produces shapes that actually achieve more than an 8% reduction in resistance.

physics.flu-dyn↗

Control of deterministic breakdown to turbulence of hypersonic boundary layer with spanwise non-uniform surface temperature

Direct Numerical Simulation (DNS) of a Mach 6 boundary layer over a flat plate is performed to assess the effect of spanwise non-uniform surface temperature on breakdown to turbulence under deterministic forcing. The streamwise location of laminar to turbulent transition in hypersonic boundary layers has a significant influence on viscous drag and aerodynamic heating of external surfaces of hypersonic vehicles. Previous work investigated the stabilization of hypersonic boundary layers by optimally growing streaks. More recently, DNS for a hypersonic boundary layer showed that it is possible to generate streaks through a spanwise non-uniform surface temperature distribution. The laminar computations showed the control method can stabilize the second Mack mode and it is robust across a range of Mach numbers and wall temperature ratios. In this work, two scenarios are investigated where two-dimensional (second Mack mode) and oblique (first Mack mode) disturbances dominate the initial linear stage of transition. It is found that weak control streaks with amplitude below 5% of the freestream velocity can reduce high-frequency shear-stress due to the second Mack mode by approximately 30% relative to the uncontrolled configuration, and delay transition. For first Mack mode dominated breakdown, the control streaks have no effect on transition location, but the peak amplitude of the spanwise-integrated wall heat flux is reduced. For the first and second Mack mode-dominated scenarios, the mean and high-frequency peak heat transfer are reduced approximately by 15% and 34%, respectively. The dominant mechanisms are identified and attributed to the pressure work contribution to turbulent kinetic energy and the second Mack mode dilatation work.

physics.flu-dyn↗

Comment on "Note on the start-up of Couette flow for viscoelastic fluids" [Phys. Fluids 35, 113108 (2023)]

I show that the initial conditions imposed by Balan [Phys. Fluids 35, 113108 (2023)] are incompatible with a nonzero retardation time, so that the problem solved is not impulsive start-up, but, as I prove exactly, the start-up of a plate ramped as $1 - \mathrm{e}^{-t/λ_2}$ on the retardation timescale $λ_2$ (a material parameter, not a setting in a rheometer). Values digitized from that paper's viscoelastic figures fall on the ramped-plate solution, not on Tanner's start-up solution. The large negative wall normal stress reported for the corotational model is a grid-dependent artifact due to the same error in the initial data. An open-source code repository provides annotated notebooks reproducing every figure and number in this Comment.

physics.flu-dyn↗