Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2006.13418

Synthesis and structural analysis of Mo/B periodical multilayer X-ray mirrors for beyond extreme ultraviolet optics

Oleksiy V. Penkov·Igor A. Kopylets·Valeriy V. Kondratenko·Mahdi Khadem
View original source ↗Read source document ↗Export metadata ↓

Abstract

The synthesis and structural analysis of Mo/B periodical multilayer X-ray mirrors (PMMs) for beyond extreme ultraviolet (BEUV) optics was performed. The PMMs were deposited by a combination of pulsed DC and radio frequency (RF) magnetron sputtering. The structure was analyzed by high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and grazing incidence X-ray reflectometry. The formation of 0.35 nm-thick interlayers comprised of a mixture of molybdenum borides was observed at the Mo/B interfaces. Furthermore, a low interface roughness of 0.3-0.4 nm was reported. The temperature of the substrate increased due to the increase in the sputtering power. This resulted in an increase in the thickness of the interlayers and the interface roughness; subsequently, the optical properties of the PMM deteriorated. Theoretical calculations were performed based on the real structure of the PMM to predict the reflectivity at a working wavelength of 6.7 nm. The reflectivity of approximately 49% was two times higher than that of the conventional B4C-based BEUV mirrors. Based on our study results, it can be concluded that the as-synthesized PMMs will perform better than the traditional mirrors and can be effectively used for the development of the next generation of BEUV lithography.

Explore related subjects

physics.app-phcond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Oleksiy V. Penkov, Igor A. Kopylets, Valeriy V. Kondratenko, Mahdi Khadem. 2020-10-28. Synthesis and structural analysis of Mo/B periodical multilayer X-ray mirrors for beyond extreme ultraviolet optics. https://doi.org/10.1016/j.matdes.2020.109318

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Thermoreflectance-Based Techniques for Micro- and Nanoscale Thermophysical Property Measurements: Principles, Methods, and Recent Advances

As semiconductor devices shrink toward the nanoscale, heat transport and thermal-energy-storage behavior in materials and interfaces become increasingly dependent on length scale, structure, and interfaces. Accurate characterization of thermophysical properties, including thermal conductivity, interfacial thermal conductance, and volumetric heat capacity, is therefore essential for functional-material design and thermal management of advanced electronic devices. Photothermal thermoreflectance techniques provide noncontact measurements with high spatial and temporal resolution and a broad measurement range, making them important tools for micro- and nanoscale thermophysical characterization. This review examines the physical principles and technical characteristics of transient thermoreflectance (TTR), time-domain thermoreflectance (TDTR), frequency-domain thermoreflectance (FDTR), steady-state thermoreflectance (SSTR), spatial-domain thermoreflectance (SDTR), and the square-pulsed source (SPS) method. A unified heat-diffusion framework is established to compare these methods in terms of parameter sensitivity, measurement uncertainty, and applicability. Representative applications illustrate their suitability for low-thermal-conductivity materials, anisotropic films, crystalline materials, and multilayer heterostructures, as well as their complementary capabilities for characterizing thin-film thermal conductivity, interfacial thermal conductance, and in-plane/cross-plane heat transport. Finally, emerging directions are discussed, including ultrahigh spatiotemporal resolution, multiphysics coupling, in-line industrial inspection, intelligent data processing, and natural-language-driven analysis.

physics.app-ph↗
arXiv2026

Janus Dipoles: Fundamentals, Realizations, and Emerging Applications

The Janus dipole - featuring orthogonally oriented electric and magnetic dipoles with a 90-degree phase difference - has emerged as a powerful paradigm for wave manipulation. Unlike traditional Huygens dipoles used for directional control, this unique configuration exhibits strongly asymmetric, face-selective near-field behavior while maintaining a quasi-isotropic far-field radiation pattern. These remarkable properties make the Janus dipole an essential platform for directional wave shaping, with wide-ranging applications in on-chip photonics, quantum interactions, and wireless power transfer. This review systematically traces the rapid development of the Janus dipole from its foundational theoretical inception to its diverse implementation platforms across optical, microwave, and acoustic frequencies. In this paper, we explore the governing principles, classify realization strategies into passive Janus dipoles, active Janus dipoles, and advanced near-field coupling control, and highlight emerging frontiers. By bridging foundational electrodynamics with advanced device engineering, this paper serves as an essential reference and roadmap for researchers designing next-generation, highly integrated, and compact wave-manipulation systems.

physics.app-ph↗
arXiv2026

Evaluation of effective wave velocities in polycrystalline materials using the ultrasonic reflection matrix

In-depth characterization of heterogeneous materials has long been a challenge in non-destructive testing. Here, a method is proposed to determine the elastic constants of metallic polycrystalline materials using back-scattered ultrasound. The waves scattered by the microstructure are analyzed to image the effective bulk velocities. To this end, a reflection matrix is acquired with an array of transducers. The projection of this matrix onto a focused basis is used to estimate an average point spread function. Optimizing this function with respect to the propagation model leads to an estimation of the longitudinal velocity. Additional treatments are developed to adapt the method to map the shear wave velocity. The local Poisson's ratio is then deduced from the ratio between those two velocities. Young's modulus and shear modulus can also be obtained assuming known densities. This matrix approach is experimentally validated on different polycrystalline materials. A sample displaying heterogeneous mechanical properties is then simulated to assess the accuracy and the resolution of the method. Its strengths and limitations are discussed, demonstrating its potential for quantitative non-destructive material characterization.

physics.app-ph↗