Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2009.08804

Improving the spatial resolution of a BOTDA sensor using deconvolution algorithm

Li Shen·Zhiyong Zhao·Can Zhao·Hao Wu·Chao Lu·Ming Tang
View original source ↗Read source document ↗Export metadata ↓

Abstract

Spatial resolution improvement from an acquired measurement using long pulse is developed for Brillouin optical time domain analysis (BOTDA) systems based on the total variation deconvolution algorithm. The frequency dependency of Brillouin gain temporal envelope is investigated by simulation, and its impact on the recovered results of deconvolution algorithm is thoroughly analyzed. To implement a reliable deconvolution process, differential pulse-width pair (DPP) technique is utilized to effectively eliminate the systematic BFS distortion stemming from the frequency dependency of temporal envelope. The width of the pulse pairs should be larger than 40 ns as is analyzed theoretically and verified experimentally. It has been demonstrated that the proposed method can realize flexible adjustment of spatial resolution with enhanced signal-to-noise ratio (SNR) from an established measurement with long pump pulse. In the experiment, the spatial resolution is increased to 0.5 m and 1 m with high measurement accuracy by using the deconvolution algorithm from the measurement of 60/40 ns DPP signals. Compared with the raw DPP results with the same spatial resolution, 9.2 dB and 8.4 dB SNR improvements are obtained for 0.5 m and 1 m spatial resolution respectively, thanks to the denoising capability of the total variation deconvolution algorithm. The impact of sampling rate on the recovery results is also studied. The proposed sensing system allows for distortion-free Brillouin distributed sensing with higher spatial resolution and enhanced SNR from the conventional DPP setup with long pulse pairs.

Explore related subjects

eess.SPphysics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Li Shen, Zhiyong Zhao, Can Zhao, Hao Wu, Chao Lu, Ming Tang. 2020-09-15. Improving the spatial resolution of a BOTDA sensor using deconvolution algorithm. https://doi.org/10.1109/jlt.2020.3047504

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗