Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2109.02465

POD-based study of turbulent plane Poiseuille flow: comparing structure and dynamics between quasi-linear simulations and DNS

Marios-Andreas Nikolaidis·Petros J. Ioannou·Brian F. Farrell·Adrián Lozano-Durán
View original source ↗Read source document ↗Export metadata ↓

Abstract

Turbulence in the restricted nonlinear (RNL) dynamics is analyzed and compared with DNS of Poiseuille turbulence at $R=1650$. The structures are obtained by POD analysis of the two components of the flow partition used in RNL dynamics: the streamwise-mean flow and fluctuations. POD analysis of the streamwise-mean flow indicates that the dominant POD modes, in both DNS and RNL, are roll-streaks harmonic in the spanwise. However, we conclude that these POD modes do not occur in isolation but rather are Fourier components of a coherent roll-streak structure. POD analysis of the fluctuations in DNS and RNL reveals similar complex structures consisting in part of oblique waves collocated with the streak. The origin of these structures is identified by their correspondence to POD modes predicted using a stochastic turbulence model (STM). These predicted POD modes are dominated by the optimally growing structures on the streak, which the STM predicts correctly to be of sinuous oblique wave structure. This close correspondence between the roll-streak structure and the associated fluctuations in DNS, RNL and the STM implies that the self-sustaining mechanism operating in DNS is essentially the same as that in RNL, which has been previously associated with optimal perturbation growth on the streak.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Marios-Andreas Nikolaidis, Petros J. Ioannou, Brian F. Farrell, Adrián Lozano-Durán. 2023-03-29. POD-based study of turbulent plane Poiseuille flow: comparing structure and dynamics between quasi-linear simulations and DNS. https://arxiv.org/abs/2109.02465

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Reynolds-number regimes of corrugation-induced lift enhancement in two-dimensional dragonfly-like wings

Corrugated wing structures commonly observed in insect wings can enhance aerodynamic performance at low Reynolds numbers ($Re \simeq O(10^3)$). However, their effectiveness strongly depends on the Reynolds number, and the corresponding operating range remains unclear. Direct numerical simulations of an impulsively started corrugated wing are performed over a wide range of Reynolds numbers ($100 \leq Re \leq 4000$) to identify the conditions under which corrugation is beneficial. Three Reynolds-number regimes are identified within the examined parameter sets. No characteristic lift-enhancement mechanism is observed for $100 \leq Re < 1000$. For $1000 \leq Re \leq 4000$, lift enhancement is associated with alternating vortices formed within the V-shaped region of the corrugated wing, which generate low-pressure regions near the wing surface. Above $Re=2000$, the collapse and confinement of a secondary vortex within the V-shaped region emerge as an additional dominant mechanism, further enhancing the lift. An analysis based on a local Reynolds number organizes the onset conditions of these mechanisms and provides a useful local measure for characterizing the onset of vortex detachment from the corrugation. Furthermore, long-time simulations confirm that the observed vortex dynamics persist well beyond the initial transient response following an impulsive start. These results elucidate Reynolds-number-dependent lift-enhancement mechanisms and define aerodynamic conditions under which corrugated wings provide an advantage.

physics.flu-dyn↗
arXiv2026

PhysMiner: An Agentic AI Framework for Automated Flow Component Analysis

Uncovering the physical mechanisms of turbulent flows remains a fundamental challenge in fluid mechanics. In particular, conventional velocity-gradient analysis methods suffer from shear contamination, which hinders accurate identification of the dominant physical mechanisms. This study presents PhysMiner, an automated framework integrating the triple decomposition method of the velocity gradient tensor with large language model-driven reasoning for turbulence-physics discovery. The triple decomposition module automatically decomposes flow fields into rigid rotation, pure shearing, and normal straining components, enabling statistical analysis, contour visualization, vortex-line extraction, and threshold-insensitive vortex identification while eliminating shear contamination. These automated capabilities are validated across five benchmarks, ranging from canonical configurations to complex engineering flows. A discover-physics agent combines flow statistics, spatial structures, and literature-derived knowledge to perform pattern recognition and physical inference, while a review Agent iteratively validates physical consistency to ensure reliable conclusions. A continuously evolving Triple Decomposition Library accumulates statistical knowledge from successfully analyzed flows, enabling cross-case comparison and progressive enhancement of inductive capability. The complete PhysMiner pipeline is validated end-to-end on the periodic hill flow, where the framework autonomously generates turbulence modeling recommendations and derives an improved subgrid-scale model with superior Reynolds-stress predictions. PhysMiner is open to the public and establishes a foundation for long-term collaborative advancement in automated turbulence-physics discovery.

physics.flu-dyn↗
arXiv2026

Lattice Boltzmann Methods for Navier-Stokes Equations in General Orthogonal Coordinates for Efficient Flow Simulations using Nonuniform Clustered Grids

Resolving multiscale fluid flows or boundary layers effectively requires the use of nonuniform meshes with local grid clustering. The standard lattice Boltzmann method (LBM), a kinetic theory-based approach for computational fluid dynamics, however, is restricted to the use of uniform Cartesian grids. We present new and improved formulations of the LBM that accommodate continuously varying spatial grids via coordinate transformations to simulate the Navier-Stokes equations (NSE) in the general orthogonal coordinates (GOC). They are constructed using a Chapman-Enskog analysis to specify the equilibrium moments of the distribution functions and the geometric force terms used in the collision step to be dependent on the local metric factors and their spatial derivatives, along with the density, momentum and their fluxes, and some correction terms related to the normal velocity gradients so as to accurately represent the NSE in the GOC. The resulting GOC-LBM importantly maintains the simplicity of the collide-and-stream approach and is Galilean invariant that is free of the cubic velocity artifacts. Our GOC-LBM is general and modular in that it can be used with any collision model with appropriate modifications to the equilibria and forcing terms. We present its implementation details for a variety of collision models while the central moments-based model using multiple relaxation times was found to be the most robust in practical implementations. We validate the GOC-LBM through numerical simulations for various benchmark flow problems. Moreover, we demonstrate significant computational advantages of our approach for a case study on simulating boundary layer flows efficiently that involves coupling the GOC-LBM for the NSE with a new GOC-LB scheme for solving the magnetic induction equation for magnetohydrodynamics (MHD), and for another case study involving orthogonal curvilinear grids.

physics.flu-dyn↗