Search arXivSearch

arXiv · 2111.06766

Densified pupil spectrograph as high-precision radial velocimetry: From direct measurement of the Universe's expansion history to characterization of nearby habitable planet candidates

Abstract

The direct measurement of the Universe's expansion history and the search for terrestrial planets in habitable zones around solar-type stars require extremely high-precision radial velocity measures over a decade. This study proposes an approach for enabling high-precision radial velocity measurements from space. The concept presents a combination of a high-dispersion densified pupil spectrograph and a novel telescope line-of-sight monitor. The precision of the radial velocity measurements is determined by combining the spectrophotometric accuracy and the quality of the absorption lines in the recorded spectrum. Therefore, a highly dispersive densified pupil spectrograph proposed to perform stable spectroscopy can be utilized for high-precision radial velocity measures. A concept involving the telescope line-of-sight monitor is developed to minimize the change of the telescope line-of-sight over a decade. This monitor allows the precise measurement of a long-term telescope drift without any significant impact on the Airy disk when the densified pupil spectra are recorded. We analytically derive the uncertainty of the radial velocity measurements, which is caused by the residual offset of the line-of-sights at two epochs. We find that the error could be reduced down to approximately 1 $cm/s$, and the precision will be limited by another factor (e.g., wavelength calibration uncertainty). A combination of the high precision spectrophotometry and the high spectral resolving power could open a new path toward the characterization of nearby non-transiting habitable planet candidates orbiting late-type stars. We present two simple and compact high-dispersed densified pupil spectrograph designs for the cosmology and exoplanet sciences.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Taro Matsuo, Thomas P. Greene, Mahdi Qezlou, Simeon Bird, Kiyotomo Ichiki, Yuka Fujii, Tomoyasu Yamamuro. 2021-11-12. Densified pupil spectrograph as high-precision radial velocimetry: From direct measurement of the Universe's expansion history to characterization of nearby habitable planet candidates. https://doi.org/10.3847/1538-3881%2Fac397b

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM