Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2112.11591

Effects of Out Time on the Mechanical and Fracture Properties of Chopped Fiber Composites Made From Repurposed Aerospace Prepreg Scrap and Waste

Troy Nakagawa·Seunghyun Ko·Cory Slaughter·Talal Abdullah·Guy Houser·Marco Salviato
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this study, the effects of prepreg out time on the mechanical and fracture properties of Discontinuous Fiber Composites (DFCs) are investigated. Carbon fiber prepregs are aged at 0x, 1x, 2x, and 3x the out life in an environmental chamber at constant temperature and humidity. Degree of cure is measured via Differential Scanning Calorimetry (DSC) while tension, compression, and shear tests are performed to investigate the effects that aging has on these mechanical properties. For the first time, Mode I intra-laminar fracture and its size effect are also investigated by means of fracture tests on geometrically-scaled Single Edge Notch Tension (SENT) specimens. From the tension, compression, and shear experiments it is seen that the out time has no effect on the elastic moduli. However, the strength increases with increasing age of the specimens for all the loading conditions. The percent increase compared to the non-aged material ranges from 15% to 33%. This is likely caused by plasticization of the matrix with age, allowing for higher energy absorption. More complex trends are reported for the SENT specimens for all the sizes. It is found that the fracture energy and characteristic length initially decrease with age, and then finally increase for the longest out time. This trend is owed to two factors with countering effects on the fracture behavior: 1) the increase of the average number of platelets with increasing aging due to increase in resin viscosity, and 2) the plasticization of the matrix with aging. The results from this study suggest that Discontinuous Fiber Composites (DFCs) made from reused materials can have equal, if not better, performance than non-aged DFCs. The experimental data presented in this work can be used as a baseline to design DFC composite components made from repurposed prepreg scrap and waste.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Troy Nakagawa, Seunghyun Ko, Cory Slaughter, Talal Abdullah, Guy Houser, Marco Salviato. 2021-12-22. Effects of Out Time on the Mechanical and Fracture Properties of Chopped Fiber Composites Made From Repurposed Aerospace Prepreg Scrap and Waste. https://arxiv.org/abs/2112.11591

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Incommensurate structural and magnetic modulations in potassium-rich cryptomelane, K$_x$Mn$_8$O$_{16}$ ($x\approx1.45$)

Cryptomelane is a hollandite-like material consisting of K$^+$ cations in an $α$-MnO$_2$ tunnel-like crystallographic motif. Cryptomelane with stoichiometry K$_x$Mn$_8$O$_{16}$ ($x\approx1.45$) has been synthesized and its magnetic properties investigated using variable-temperature magnetic susceptibility, heat capacity, and neutron powder diffraction. Three distinct transitions at $T_1=184$\,K, $T_2=54.5$\,K, and $T_3=24$\,K are observed. At $T_1$ there is a subtle tetragonal$\rightarrow$monoclinic transition associated with emergence of a set of non-magnetic superstructure peaks indexable to a $\vec{k}_\mathrm{struc}\approx0.74\vec{c^*}$ incommensurate modulation parallel to the $α$-MnO$_2$ tunnels. Our findings are consistent with a relation previously reported in titanate hollandites, that $x\approx2|\vec{k}_\mathrm{struc}|$. Magnetic Bragg peaks emerge below $T_2=54.5$\,K, and their positions indicate an incommensurate modulated magnetic structure. The model consistent with the data is a dual-$\vec{k}_\mathrm{mag}$ structure with a ferromagnetic $|\vec{k}_\mathrm{mag}|=0$ component and an incommensurate $\vec{k}_\mathrm{mag}\approx0.37\vec{c^*}$, with the latter most likely to be helical. The period of oscillation of the incommensurate magnetic component is in line with predictions based on a Heisenberg spin Hamiltonian [Mandal \textit{et al}. Phys. Rev. B 90, 104420 (2014)]. Below $T_3=24$\,K, there is a magnetic transition, which gives rise to a different set of magnetic Bragg peaks indicative of a highly complex magnetic structure.

cond-mat.mtrl-sci↗
arXiv2026

An anisotropic functional for two-dimensional material systems

Density function theory is the workhorse of modern electronic structure theory. However, its accuracy in practical calculations is limited by the choice of the exchange-correlation potential. In this respect, two-dimensional materials pose a special challenge, as all these materials and their heterostructures have a crucial similarity. The underlying atomic structures are strongly spatially inhomogeneous, implying that current exchange-correlation functionals, that in almost all cases are isotropic, are ill-prepared for an accurate description. We present an anisotropic screened-exchange potential, that remedies this problem and reproduces the band-gap of 2D materials as well as the piecewise linearity of the total energy with fractional occupation number.

cond-mat.mtrl-sci↗
arXiv2026

Thermally-driven reorientation of the Néel vector in altermagnetic MnTe

Altermagnets are novel magnetic systems that possess a spin-polarized electronic band structure without a net magnetic moment, making them promising for device applications. Hexagonal MnTe, a prototypical altermagnet, arguably exhibits the most properties consistent with theoretical predictions, including an anomalous Hall effect despite a vanishing net magnetization, and altermagnetinduced electronic band splitting. However, fundamental questions remain, including why some effects only appear significantly below the magnetic ordering temperature. Here, we resolve this discrepancy by revealing a reorientation of the Néel vector in single-crystalline MnTe. The Néel vector points 30° from the a-axis at low $T$, before aligning directly with the a-axis around $T\simeq 260$ K. We attribute this to single-ion anisotropy, which depends on temperature-dependent lattice parameters. We obtained these results using muon-spin spectroscopy, magnetization measurements, and X-ray diffraction; we show that the findings are consistent with neutron diffraction. Manipulating this effect, for example through strain, could unlock sensitive electronic detection schemes for external stimuli, paving the way for functional altermagnetic devices.

cond-mat.mtrl-sci↗