Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

Jaber Rezaei Mianroodi; Pratheek Shanthraj; Alisson Kwiatkowski da Silva; Bob Svendsen; Dierk Raabe

Home/Archive/arXiv

arXiv · 2206.03767

Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

Jaber Rezaei Mianroodi·Pratheek Shanthraj·Alisson Kwiatkowski da Silva·Bob Svendsen·Dierk Raabe

View original source ↗Read source document ↗Export metadata ↓

Abstract

Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based potential used in MCMD, as well as CALPHAD data. Simulation results for Mn segregation to, and spinodal decomposition along, straight screw and edge dislocations as well as dislocation loops, are compared with characterization results from atom probe tomography (APT) for two Fe-Mn alloy compositions. In contrast to classical Volterra dislocation theory, both MPFCM and MCMD predict a non-zero hydrostatic stress field in screw cores. Being of much smaller magnitude than the hydrostatic stress in straight edge cores, much less solute segregates to screw than to edge cores. In addition, the segregated amount in screw cores is below the critical concentration of 0.157 for the onset of spinodal decomposition along the line. Results from MPFCM-based modeling imply that the concentration dependence of the solute misfit distortion and resulting dependence of the elastic energy density on concentration have the strongest effect. The maximum amount of Mn segregating to straight edge dislocations predicted by MPFCM agrees well with APT results. The MPFCM model for Fe-Mn predicts little or no variation in Mn concentration along a straight dislocation line, in contrast to the APT results. As shown by the example of a dislocation loop in the current work, a change in the hydrostatic stress along the line due to changing character of dislocation does lead to a corresponding variation in Mn concentration. Such a variation in Mn concentration can also then be expected along a dislocation line with kinks or jogs.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Jaber Rezaei Mianroodi, Pratheek Shanthraj, Alisson Kwiatkowski da Silva, Bob Svendsen, Dierk Raabe. 2022-06-08. Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys. https://arxiv.org/abs/2206.03767

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Structure and dynamics of the negative thermal expansion material Cd(CN)$_2$ under hydrostatic pressure

We use a combination of variable-temperature / variable-pressure neutron powder diffraction, variable-pressure inelastic neutron scattering, and quantum chemical calculations to interrogate the behaviour of the negative thermal expansion (NTE) material $^{114}$Cd(CN)$_2$ under hydrostatic pressure. We determine the equation of state of the ambient-pressure phase, and discover the so-called `warm hardening' effect whereby the material becomes elastically stiffer as it is heated. We also identify a number of high-pressure phases, and map out the phase behaviour of Cd(CN)$_2$ over the range $0\leq p\leq0.5$\,GPa, $100\leq T\leq300$\,K. As expected for an NTE material, the low-energy phonon frequencies are found to soften under pressure, and we determine an effective Gr{ü}neisen parameter for these modes. Finally, we show that the elastic behaviour of Cd(CN)$_2$ is sensitive to the local Cd coordination environment, which suggests an interplay between short- (phononic) and long-timescale (cyanide flips) fluctuations in Cd(CN)$_2$.

cond-mat.mtrl-sci↗

arXiv2026

Unconventional Magnetism, Sliding Ferroelectricity, and Magneto-Optical Kerr Effect in Multiferroic Bilayers

Antiferromagnetic (AFM) materials provide a platform to couple altermagnetic (AM) spin-splitting with the magneto-optical Kerr effect (MOKE), offering potential for next-generation quantum technologies. In this work, first-principles calculations, symmetry analysis, and kp modeling are employed to show that interlayer sliding in AFM multiferroic bilayers enables control of electronic, magnetic, and magneto-optical properties. This study reveals an intriguing dimension-driven AM crossover: the 2D paraelectric (PE) bilayer exhibits spin-degenerate bands protected by the [C2||Mc] spin-space symmetry, whereas the 3D counterpart manifests AM spin-splitting along kz \neq 0 paths. Furthermore, interlayer sliding breaks this Mc symmetry and stabilizes a ferroelectric (FE) state with compensated ferrimagnetism, where the Zeeman-like field is responsible for the nonrelativistic spin-splitting. In the FE phase, spin-orbit coupling (SOC) lifts accidental degeneracies and produces `alternating' spin-polarized bands through the interplay of Zeeman and Rashba effects. Crucially, spin polarization, ferrovalley polarization, and the Kerr angle can all be reversed by switching either sliding ferroelectricity or the Neel vector. Our findings reveal the rich coupling among electronic, magnetic, and optical orders in sliding multiferroics, illustrating new prospects for ultralow-power spintronic and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Lead-free piezoelectric perovskites for arterial-pulse e-skin: from configurational complexity to equivariant machine-learning potentials

Continuous, non-invasive monitoring of the arterial pulse is a clinical priority for cardiovascular disease, the leading cause of global mortality. Flexible piezoelectric electronic skins can transduce the 1-10 kPa pressure wave into a self-powered voltage, but the best-performing piezoceramics are lead-based, and their toxicity is incompatible with skin contact and with tightening RoHS/REACH regulation. Among lead-free alternatives, the BaTiO$3$-based solid solution BZT-BCT reaches $d{33} \approx 620$ pC/N near its tricritical morphotropic phase boundary, rivalling soft PZT while remaining biocompatible. Exploiting this in a wearable confronts a sensitivity-flexibility paradox and three computational walls: the combinatorial explosion of atomic configurations in a disordered solid solution, the band-gap error of affordable density-functional approximations, which corrupts leakage and insulation estimates, and the 0 K nature of standard calculations against a 310 K operating temperature. We review lead-free piezoelectrics, morphotropic-boundary physics and fabricated flexible devices, then argue that equivariant machine-learning interatomic potentials --- coupled to a tiered functional hierarchy and finite-temperature lattice dynamics --- can survey the full configurational ensemble at body temperature and close the gap to a clinically viable lead-free pulse sensor.

cond-mat.mtrl-sci↗