Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2210.03480

Moiré Engineering in 2D Heterostructures with Process-Induced Strain

Tara Peña·Aditya Dey·Shoieb A. Chowdhury·Ahmad Azizimanesh·Wenhui Hou·Arfan Sewaket·Carla L. Watson·Hesam Askari·Stephen M. Wu
View original source ↗Read source document ↗Export metadata ↓

Abstract

We report deterministic control over moiré superlattice interference pattern in twisted bilayer graphene by implementing designable device-level heterostrain with process-induced strain engineering, a widely used technique in industrial silicon nanofabrication processes. By depositing stressed thin films onto our twisted bilayer graphene samples, heterostrain magnitude and strain directionality can be controlled by stressor film force (film stress x film thickness) and patterned stressor geometry, respectively. We examine strain and moiré interference with Raman spectroscopy through in-plane and moiré-activated phonon mode shifts. Results support systematic C$_{3}$ rotational symmetry breaking and tunable periodicity in moiré superlattices under the application of uniaxial or biaxial heterostrain. Experimental results are validated by molecular statics simulations and density functional theory based first principles calculations. This provides a method to not only tune moiré interference without additional twisting, but also allows for a systematic pathway to explore different van der Waals based moiré superlattice symmetries by deterministic design.

Explore related subjects

cond-mat.mes-hallphysics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tara Peña, Aditya Dey, Shoieb A. Chowdhury, Ahmad Azizimanesh, Wenhui Hou, Arfan Sewaket, Carla L. Watson, Hesam Askari, Stephen M. Wu. 2023-04-03. Moiré Engineering in 2D Heterostructures with Process-Induced Strain. https://doi.org/10.1063/5.0142406

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Effect of Buried-Interface Preparation for Nb Superconducting Resonators on InP

Substrate surface preparation is a key step in the fabrication of electronic devices. In III--V semiconductor platforms, e.g. used in HEMTs and lasers, removal of the native substrate oxide is extremely important, where improper removal will negatively affect end-of-line device performance. However, the impact of substrate preparation in hybrid superconductor--semiconductor (S--Sm) systems relevant to quantum information applications remains poorly understood. This study compares three surface preparations for the deposition of sputtered Nb films on InP: (i) no intentional oxide removal (control), (ii) \textit{in-situ} $\mathrm{Ar}^{+}$ milling, and (iii) S-passivation. \textit{In-situ} $\mathrm{Ar}^{+}$ milling reduces the O concentration at the metal--substrate (MS) interface, but also roughens the InP surface, increasing the effective thickness of the Nb--InP interface and promoting O incorporation through extended defects in the Nb film. S-passivation suppresses interfacial O more effectively while preserving a sharper and smoother buried interface. It also yields Nb films with higher superconducting transition temperatures and less structural damage than the $\mathrm{Ar}^{+}$-milled samples. Despite these materials improvements, the microwave response is comparable across the three preparations. At single photon powers, the highest internal quality factors, $Q_i$, are approximately $1.30\times10^{5}$ ($130\mathrm{k}$) for the control resonators, $9.7\times10^{4}$ ($97\mathrm{k}$) for the S-passivated resonators, and $8.4\times10^{4}$ ($84\mathrm{k}$) for the $\mathrm{Ar}^{+}$-milled resonators. These results suggest that the present devices are not primarily limited by dielectric loss at the buried Nb--InP interface.

cond-mat.mes-hall↗
arXiv2026

Heating of black-Si by microwaves at 2.45 GHz: effect of nano-needle orientation

Silicon, which is highly reflective and has negligible absorption at the microwave 2.45 GHz range, can be heated when it is turned into black-Si with a surface texture of nano-needles made by SF6/O2 plasma etching. Microwave heating of flat Si and of black-Si with vertical and with tilted (oriented) nano-needles was compared under identical conditions in a cylindrical TM010 resonator. Samples were placed horizontally on a 150-micrometer-thick cover glass, which standardized their height and position inside the cavity and allowed a common calibration of the radiation thermometer against a K-type thermocouple. Under a stepwise protocol of only 2-3-4 W of microwave power (60 s per step), black-Si with vertical needles reached ~ 260 C, systematically exceeding flat Si (~ 190 C), while black-Si with oriented needles showed a delayed but abrupt onset of heating at 3 W. In situ monitoring of the cavity resonance revealed a 2-3 MHz downshift of the resonance frequency f for all samples, with the drift consistently appearing once the sample temperature exceeded ~ 120 - 150 C, consistent with thermally activated carrier generation in Si. At a given temperature, each sample loads the cavity at a different f and quality factor Q, indicating an orientation-dependent effective permittivity of the nano-needle array, in line with the strong form birefringence of tilted black-Si. Application potential and challenges in the quantitative temperature and permittivity determination are discussed.

cond-mat.mes-hall↗
arXiv2026

Converting $PT$-Symmetric Topological Classes by Floquet Engineering

Going beyond the conventional classification rule of Altland-Zirnbauer symmetry classes, $PT$ symmetric topological phases are classified by $(PT)^2=1$ or $-1$. The interconversion between the two $PT$-symmetric topological classes is generally difficult due to the constraint of $(PT)^2$. Here, we propose a scheme to control and interconvert the $PT$-symmetric topological classes by Floquet engineering. We find that it is the breakdown of the $\mathbb{Z}_2$ gauge, induced by the $π$ phase difference between different hopping rates, by the periodic driving that leads to such an interconversion. Relaxing the system from the constraint of $(PT)^2$, rich exotic topological phases, e.g., the coexisting $PT$-symmetric first-order real Chern insulator and second-order topological insulators not only in different quasienergy gaps, but also in one single gap, are generated. In contrast to conventional Floquet topological phases, our result provides a way to realize exotic topological phases without changing symmetries. It enriches the family of topological phases and gives an insightful guidance for the development of multifunctional quantum devices.

cond-mat.mes-hall↗