Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2308.06908

Recent developments in comprehensive analytical instruments for the culture heritage objects-A review

Yuanjun Xu·Zhu An·Ning Huang·Peng Wang·Ze He·Zihan Chen
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper introduces the necessity and significance of the investigation of cultural heritage objects. The multi-technique method is useful for the study of cultural heritage objects, but a comprehensive analytical instrument is a better choice since it can guarantee that different types of information are always obtained from the same analytical point on the surface of cultural heritage objects, which may be crucial for some situations. Thus, the X-ray fluorescence (XRF)/X-ray diffraction (XRD) and X-ray fluorescence (XRF)/Raman spectroscopy (RS) comprehensive analytical instruments are more and more widely used to study cultural heritage objects. The two types of comprehensive analytical instruments are discussed in detail and the XRF/XRD instruments are further classified into different types on the basis of structure, type and number of detectors. A new comprehensive analytical instrument prototype that can perform XRF, XRD and RS measurements simultaneously has been successfully developed by our team and the preliminary application has shown the analysis performance and application potential. This overview contributes to better understand the research progress and development tendency of comprehensive analytical instruments for the study of cultural heritage objects. The new comprehensive instruments will make researchers obtain more valuable information on cultural heritage objects and further promote the study on cultural heritage objects.

Explore related subjects

physics.ins-detphysics.app-phphysics.atom-phphysics.med-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yuanjun Xu, Zhu An, Ning Huang, Peng Wang, Ze He, Zihan Chen. 2023-08-14. Recent developments in comprehensive analytical instruments for the culture heritage objects-A review. https://arxiv.org/abs/2308.06908

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det↗
arXiv2026

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det↗
arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗