Search arXivSearch

arXiv · 2308.11128

Structural, morphological, and magnetic characterizations of (Fe0.25Mn0.75)2O3 nanocrystals: a comprehensive stoichiometric determination

Abstract

Iron manganese trioxide (Fe0.25Mn0.75)2O3 nanocrystals were synthesized by the sol-gel method. The 80 K Mossbauer spectrum was well-fitted using two doublets representing the 8b and 24d crystallographic sites of the (FexMn1-x)2O3 phase and two weak extra sextets which were attributed to crystalline and amorphous hematite. Our findings showed formation of a bixbyite primary phase. The Raman spectrum exhibits six Raman active modes, typical of (Fe,Mn)2O3, and two extra Raman modes associated with the secondary hematite phase. X-ray photoelectron spectroscopy analysis confirmed the presence of oxygen vacancy onto the (FexMn1-x)2O3 particle surface, with varying oxidation states. X-band magnetic resonance data revealed a single broad resonance line in the whole temperature range (3.8 K - 300 K). The temperature dependence of both resonance field and resonance linewidth shows a remarkable change in the range of 40 - 50 K, herein credited to surface spin glass behavior. The model picture used assumes (FexMn1-x)2O3 nanoparticles with a core-shell structure. Results indicate that below about 50 K the spin system of shell reveals a paramagnetic to spin glass-like transition upon cooling, with a critical temperature estimated at 43 K. In the higher temperature range, the superparamagnetic hematite (secondary) phase contributes remarkably to the temperature dependence of the resonance linewidth. Zero-field-cooled (ZFC) and fieldcooled (FC) data show strong irreversibility and a peak in the ZFC curve at 33 K, attributed to a paramagnetic-ferrimagnetic transition of the main phase. Hysteresis curve at 5 K shows a low coercive field of 4 kOe, with the magnetization not reaching saturation at 70 kOe, suggesting the occurrence of a ferrimagnetic core with a magnetic disorder at surface, characteristic of core-shell spin-glass-like behavior.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

John C. Mantilla, Luiz C. C. M. Nagamine, Daniel R. Cornejo, Renato Cohen, Wesley de Oliveira, Paulo E. N. Souza, Sebastião W. da Silva, Fermin F. H. Aragón, Pedro L. Gastelois, Paulo C. Morais, José A. H. Coaquira. 2023-12-21. Structural, morphological, and magnetic characterizations of (Fe0.25Mn0.75)2O3 nanocrystals: a comprehensive stoichiometric determination. https://arxiv.org/abs/2308.11128

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Structure and dynamics of the negative thermal expansion material Cd(CN)$_2$ under hydrostatic pressure

We use a combination of variable-temperature / variable-pressure neutron powder diffraction, variable-pressure inelastic neutron scattering, and quantum chemical calculations to interrogate the behaviour of the negative thermal expansion (NTE) material $^{114}$Cd(CN)$_2$ under hydrostatic pressure. We determine the equation of state of the ambient-pressure phase, and discover the so-called `warm hardening' effect whereby the material becomes elastically stiffer as it is heated. We also identify a number of high-pressure phases, and map out the phase behaviour of Cd(CN)$_2$ over the range $0\leq p\leq0.5$\,GPa, $100\leq T\leq300$\,K. As expected for an NTE material, the low-energy phonon frequencies are found to soften under pressure, and we determine an effective Gr{ü}neisen parameter for these modes. Finally, we show that the elastic behaviour of Cd(CN)$_2$ is sensitive to the local Cd coordination environment, which suggests an interplay between short- (phononic) and long-timescale (cyanide flips) fluctuations in Cd(CN)$_2$.

cond-mat.mtrl-sci

Unconventional Magnetism, Sliding Ferroelectricity, and Magneto-Optical Kerr Effect in Multiferroic Bilayers

Antiferromagnetic (AFM) materials provide a platform to couple altermagnetic (AM) spin-splitting with the magneto-optical Kerr effect (MOKE), offering potential for next-generation quantum technologies. In this work, first-principles calculations, symmetry analysis, and kp modeling are employed to show that interlayer sliding in AFM multiferroic bilayers enables control of electronic, magnetic, and magneto-optical properties. This study reveals an intriguing dimension-driven AM crossover: the 2D paraelectric (PE) bilayer exhibits spin-degenerate bands protected by the [C2||Mc] spin-space symmetry, whereas the 3D counterpart manifests AM spin-splitting along kz \neq 0 paths. Furthermore, interlayer sliding breaks this Mc symmetry and stabilizes a ferroelectric (FE) state with compensated ferrimagnetism, where the Zeeman-like field is responsible for the nonrelativistic spin-splitting. In the FE phase, spin-orbit coupling (SOC) lifts accidental degeneracies and produces `alternating' spin-polarized bands through the interplay of Zeeman and Rashba effects. Crucially, spin polarization, ferrovalley polarization, and the Kerr angle can all be reversed by switching either sliding ferroelectricity or the Neel vector. Our findings reveal the rich coupling among electronic, magnetic, and optical orders in sliding multiferroics, illustrating new prospects for ultralow-power spintronic and optoelectronic devices.

cond-mat.mtrl-sci

Lead-free piezoelectric perovskites for arterial-pulse e-skin: from configurational complexity to equivariant machine-learning potentials

Continuous, non-invasive monitoring of the arterial pulse is a clinical priority for cardiovascular disease, the leading cause of global mortality. Flexible piezoelectric electronic skins can transduce the 1-10 kPa pressure wave into a self-powered voltage, but the best-performing piezoceramics are lead-based, and their toxicity is incompatible with skin contact and with tightening RoHS/REACH regulation. Among lead-free alternatives, the BaTiO$3$-based solid solution BZT-BCT reaches $d{33} \approx 620$ pC/N near its tricritical morphotropic phase boundary, rivalling soft PZT while remaining biocompatible. Exploiting this in a wearable confronts a sensitivity-flexibility paradox and three computational walls: the combinatorial explosion of atomic configurations in a disordered solid solution, the band-gap error of affordable density-functional approximations, which corrupts leakage and insulation estimates, and the 0 K nature of standard calculations against a 310 K operating temperature. We review lead-free piezoelectrics, morphotropic-boundary physics and fabricated flexible devices, then argue that equivariant machine-learning interatomic potentials --- coupled to a tiered functional hierarchy and finite-temperature lattice dynamics --- can survey the full configurational ensemble at body temperature and close the gap to a clinically viable lead-free pulse sensor.

cond-mat.mtrl-sci