Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2311.02095

Transient Thermal and Electrical Characteristics of a Cylindrical LiFeS2 Cell with Equivalent Circuit Model

Khaled I Alsharif·Alexander H Pesch·Vamsi Borra·Pedro Cortes·Eric MacDonald·Frank X Li·Kyosung Choo
View original source ↗Read source document ↗Export metadata ↓

Abstract

This study examines the discharge behaviour of a cylindrical LiFeS2 cell to evaluate the parameters that can be used to predict and estimate the nonlinear dynamic response of a battery. A linear model is developed to simulate the discharge behaviour and examine the thermal behaviour. In particular, a commercial-grade battery is discharged with the industry-standard hybrid power pulsing characterization (HPPC) test and the current and voltage responses are recorded. The dynamic system is modelled with the equivalent circuit model (ECM) through MATLAB Simulink. A block diagram representation of the equivalent circuit model governing equations was developed. The parameter estimation tool was utilized to reduce the error and fit the simulation results to the experimental voltage responses, in order to obtain state of charge dependent dynamic parameters. Those parameters were then used in a Dual-Potential Multi-Scale Multi-Domain (MSMD) Battery Model solved in ANSYS Fluent to analyze the thermal behaviour by acquiring the temperature profiles and the temperature distribution within the cell. The nonlinear behaviour of the battery was characterized and the equivalent circuit model parameters were identified and are shown to agree with the experimental voltage responses. Furthermore, it is found that the battery temperature increased by 7.35 deg and was distributed uniformly within the cell.

Explore related subjects

eess.SYcond-mat.mtrl-scics.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Khaled I Alsharif, Alexander H Pesch, Vamsi Borra, Pedro Cortes, Eric MacDonald, Frank X Li, Kyosung Choo. 2023-10-28. Transient Thermal and Electrical Characteristics of a Cylindrical LiFeS2 Cell with Equivalent Circuit Model. https://doi.org/10.11159/ffhmt22.155

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Simultaneous state estimation and control for nonlinear systems subject to bounded disturbances

In this work, we address the output--feedback control problem for nonlinear systems under bounded disturbances using a moving horizon approach. The controller is posed as an optimisation-based problem that simultaneously estimates the state trajectory and computes future control inputs. It minimises a criterion that involves finite backward and forward horizons with respect to the unknown initial state, measurement noises and control input variables.The main novelty of this work relies on linking the lengths of the forward and backward windows with the closed-loop stability, assuming detectability and decoding sufficient conditions to assure system stabilizability. It leads to a formulation that does not require to be a Control Lyapunov Function for the terminal cost of the controller. Simulation examples are carried out to compare the performance of solving simultaneously and independently the estimation and control problems. Furthermore, the examples show how the controller influences the length of the estimation window through its gain.

eess.SY↗
arXiv2026

On finite-horizon approximation of an infinite-horizon feedback Nash equilibrium in discrete-time LQ games

Computing feedback Nash equilibria (FNEs) in infinite-horizon discrete-time linear-quadratic (LQ) dynamic games remains computationally challenging. Inspired by model predictive control (MPC) in single-agent optimal control, we address this challenge with a finite-horizon strategy for approximating one such FNE. The finite-horizon strategy is as follows. Each player $i$ has an individual prediction horizon $T^i$. At each stage, player $i$ envisions an auxiliary $T^i$-stage game, computes its unique FNE, and implements only the first-stage control. Our main results are as follows. First, we give parameter conditions that guarantee geometric convergence of the coupled Riccati iteration to a stabilizing solution. Second, under these conditions, the finite-horizon strategies stabilize the system, and each player's total cost converges to the limiting FNE cost as all prediction horizons tend to infinity. Third, we derive an explicit upper bound on this cost gap that decreases geometrically with the shortest prediction horizon. This bound tells us how long the prediction horizons need to be for a given accuracy. The strategy is tractable and implementable, as it avoids directly solving the coupled algebraic Riccati equations of the infinite-horizon game.

eess.SY↗
arXiv2026

Closed Loop Reference Optimization for Extrusion Additive Manufacturing

Various defects occur during material extrusion additive manufacturing processes that degrade the quality of the 3D printed parts and lead to significant material waste. This motivates feedback control of the extrusion process to mitigate defects and prevent print failure. We propose a linear quadratic regulator (LQR) for closed-loop control with force feedback to provide accurate width tracking of the extruded filament. Furthermore, we propose preemptive optimization of the reference force given to the LQR that accounts for the performance of the LQR and generates the optimal reference for the closed loop extrusion dynamics and machine constraints. Simulation results demonstrate the improved tracking performance and response time. Experiments on a Fused Filament Fabrication 3D printer showcase a root mean square error improvement of 39.57% compared to tracking the unmodified reference as well as an 83.7% shorter settling time.

eess.SY↗