Investigating intrinsic silicon oxide and a lightly doped p-type layer for evolution of tail states and estimating its impact as a passivation layer in a HIT type device

S M Iftiquar

doi:10.1007/s12633-023-02787-8

Home/Archive/arXiv

arXiv · 2312.06111

Investigating intrinsic silicon oxide and a lightly doped p-type layer for evolution of tail states and estimating its impact as a passivation layer in a HIT type device

S M Iftiquar

View original source ↗Read source document ↗Export metadata ↓

Abstract

Hydrogenated amorphous silicon is well known for its various alloys and wide ranging opto-electronic properties. Hydrogenated silicon sub-oxide (aSiO:H) is one of them. The effect of boron doping on optoelectronic properties of the aSiO:H have been investigated with intrinsic and delta-doped materials. The Urbach energy of the tail and midgap defect states of the intrinsic and lightly doped(0.01% gas phase doping) materials were found to be 103, 151 meV and 8.19x1016 , 5.47x1017 cm-3 respectively. As a result of the 0.01% doping a reduction in optical gap was observed from 1.99 to 1.967 eV along with a shift in Fermi level by 0.258eV, indicating an efficient boron doping of the intrinsic silicon oxide material. The lightly doped p-type layer was used to simulate device characteristics in amorphous silicon (aSi:H) and HIT-type solar cell. In the aSi:H device the power conversion efficiency (PCE) was moderate while in a HIT-type device the PCE was 26.4%. It indicated that a good quality silicon oxide layer can be an attractive passivation layer for a HIT type device. It further indicated that defect density of the passivation layer can have a significant impact on performance of a HIT type device. The primary difference of the two passivation layers (intrinsic and delta-doped) are the difference in mid-gap and tail states. Passivation layer with a higher mid-gap state leads to poorer device performance. Therefore, it highlights the importance of using a less defective passivation layer to improve device performance.

Explore related subjects

physics.optics cond-mat.mtrl-sci physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

S M Iftiquar. 2023-12-11. Investigating intrinsic silicon oxide and a lightly doped p-type layer for evolution of tail states and estimating its impact as a passivation layer in a HIT type device. https://doi.org/10.1007/s12633-023-02787-8

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Active Fourier Spectroscopy: From fixed sampling protocols to adaptive measurement

Fourier-transform spectroscopy (FTS) is based on the Nyquist-Shannon theorem, which dictates a strict sampling protocol for the measurement of continuous signals. Here we introduce Active Fourier Spectroscopy (AFS), a generalization of FTS in which measurements are still taken in the Fourier-conjugate delay domain, but where the most informative acquisition points are selected adaptively and the spectrum is reconstructed by sequential, uncertainty-aware inference rather than by fixed-grid Fourier inversion. Our approach relies on a theoretical insight that the Nyquist condition applies only under complete ignorance about the system under investigation, and shows how to systematically improve upon it when prior knowledge exists. Because AFS recovers conventional FTS whenever the prior is uninformative, its performance never falls below that of conventional sampling. We demonstrate AFS for optical spectroscopy in three settings vital to research and medicine: clinical FTIR-based blood plasma analysis, optical metrology of structured laser beams, and hyperspectral imaging with an RGB camera. In each case AFS reaches a higher target reconstruction quality from far fewer acquisitions and provides complete uncertainty quantification in real time, propagated rigorously through downstream analysis.

physics.optics↗

arXiv2026

Memory in Integrated Photonic Neural Networks: From Physical Mechanisms to Neuromorphic Architectures

The rapid scaling of artificial neural networks has exposed fundamental limitations of conventional von Neumann computing architectures. In these systems, the physical separation between memory and processing creates a bottleneck, as computational capabilities outpace the ability of memory and interconnects to supply and retrieve data. In contrast, biological neural systems inherently co-localize computation and memory through distributed, dynamical processes. Neuromorphic computing seeks to emulate this paradigm by leveraging physical substrates whose intrinsic dynamics simultaneously encode and process information. Among emerging platforms, silicon photoncis offer a compelling approach due to its high bandwidth, low-loss propagation, and inherent parallelism. This review examines the role of memory in integrated photonic neuromorphic systems, with emphasis on the physical mechanisms that provide volatile (short-term) and non-volatile (long-term) memory in silicon-on-insulator and hybrid silicon-on-insulator platforms. Drawing inspiration from digital, biological, and photonic memory architectures, we classify existing approaches based on their underlying physical principles. We cover implementations ranging from delay lines and slow-light structures to multistable dynamics and structural memory based on charge trapping and phase-change materials. We then discuss how these mechanisms support photonic neural network architectures, including feed-forward, reservoir computing, spiking and hybrid optoelectronic recurrent systems, and assess their relevance for time-dependent singal-processing tasks such as channel equalization in telecommunications. This review aims to establish a unified framework for understanding memory and learning in neuromorphic photonics and outlines key challenges and opportunities for scalable, energy-efficient neuromorphic hardware.

physics.optics↗

arXiv2026

Exoplanet Detection Using Adaptive Quantum-Optimal Measurement

Detecting terrestrial exoplanets in the habitable zones of nearby stars remains a critical challenge. Such planets can be \(10^8\) to \(10^{10}\) times fainter than their host stars and lie at diffraction-limited angular separations, where starlight strongly obscures the companion signal. Here we present an adaptive quantum measurement method for estimating the number, positions, and brightnesses of mutually incoherent point sources in the sub-Rayleigh, ultra-high-contrast regime, operating at contrasts down to \(10^{-8}\) -- five orders of magnitude beyond previous quantum imaging approaches to exoplanet detection. The method adopts a spatial-mode basis that is updated to maximize the quantum Fisher information per detected photon. Estimation is performed by maximum likelihood in log-brightness coordinates, and the source count is determined by Bayesian-information-criterion (BIC) model selection directly from photon-count statistics, without a tunable detection threshold. For point sources within sub-Rayleigh separations and with brightness ratios spanning eight orders of magnitude, the method reconstructs complete scenes with a mean success rate of \(72.5\%\). Furthermore, it is robust to misalignment, maintaining a \(71.3\%\) success rate under offsets of up to six pixels. These results demonstrate that terrestrial exoplanets can be detected below the Rayleigh limit, a regime previously inaccessible to direct imaging.

physics.optics↗