Search arXivSearch

arXiv · 2402.07835

Carrier Mobility and High-Field Velocity in 2D Transition Metal Dichalcogenides: Degeneracy and Screening

Abstract

The effect of degeneracy and the impact of free-carrier screening on a low-field mobility and a high-field drift velocity in MoS2 and WS2 are explored using an in-house ensemble Monte Carlo simulator. Electron low field mobility increases to 8400 cm2/Vs for MoS2 and to 12040 cm2/Vs for WS2 when temperature decreases to 77 K and carrier concentration is around 5e12 cm-2. In the case of holes, best mobility values were 9320 cm2/Vs and 13290 cm2 per Vs, reached at 77 K, while at room temperature these fall to 80 cm2/Vs and 150 cm2/Vs for MoS2 and WS2, respectively. The carrier screening effect plays a major role at low fields, and low and intermediate temperatures, where a combination of large occupancy of primary valleys and carrier-phonon interactions dominated by relatively low energy exchange processes results in an enhanced screening of intrinsic scattering. For electrons, degeneracy yields to transport in secondary valleys, which plays an important role in the decrease of the low field mobility at high concentrations and/or at room temperature. The high-field drift velocity is not much affected by carrier screening because of an increased carrier scattering with surface optical polar phonons, favouring larger phonon wavevector interactions with small dielectric function values.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jose Manuel Iglesias, Alejandra Nardone, Raul Rengel, Karol Kalna, Maria J. Martin, Elena Pascual. 2024-02-12. Carrier Mobility and High-Field Velocity in 2D Transition Metal Dichalcogenides: Degeneracy and Screening. https://doi.org/10.1088/2053-1583%2Facb1c2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Janus Dipoles: Fundamentals, Realizations, and Emerging Applications

The Janus dipole - featuring orthogonally oriented electric and magnetic dipoles with a 90-degree phase difference - has emerged as a powerful paradigm for wave manipulation. Unlike traditional Huygens dipoles used for directional control, this unique configuration exhibits strongly asymmetric, face-selective near-field behavior while maintaining a quasi-isotropic far-field radiation pattern. These remarkable properties make the Janus dipole an essential platform for directional wave shaping, with wide-ranging applications in on-chip photonics, quantum interactions, and wireless power transfer. This review systematically traces the rapid development of the Janus dipole from its foundational theoretical inception to its diverse implementation platforms across optical, microwave, and acoustic frequencies. In this paper, we explore the governing principles, classify realization strategies into passive Janus dipoles, active Janus dipoles, and advanced near-field coupling control, and highlight emerging frontiers. By bridging foundational electrodynamics with advanced device engineering, this paper serves as an essential reference and roadmap for researchers designing next-generation, highly integrated, and compact wave-manipulation systems.

physics.app-ph

Evaluation of effective wave velocities in polycrystalline materials using the ultrasonic reflection matrix

In-depth characterization of heterogeneous materials has long been a challenge in non-destructive testing. Here, a method is proposed to determine the elastic constants of metallic polycrystalline materials using back-scattered ultrasound. The waves scattered by the microstructure are analyzed to image the effective bulk velocities. To this end, a reflection matrix is acquired with an array of transducers. The projection of this matrix onto a focused basis is used to estimate an average point spread function. Optimizing this function with respect to the propagation model leads to an estimation of the longitudinal velocity. Additional treatments are developed to adapt the method to map the shear wave velocity. The local Poisson's ratio is then deduced from the ratio between those two velocities. Young's modulus and shear modulus can also be obtained assuming known densities. This matrix approach is experimentally validated on different polycrystalline materials. A sample displaying heterogeneous mechanical properties is then simulated to assess the accuracy and the resolution of the method. Its strengths and limitations are discussed, demonstrating its potential for quantitative non-destructive material characterization.

physics.app-ph

A Green's-function method for vertical thermal boundary conductance in anisotropic multilayers

Vertical thermal interfaces occur in both engineered and natural materials. Their vertical thermal boundary conductance can differ from the horizontal counterpart, requiring dedicated characterization. Yet current thermal metrology resolves vertical thermal boundary conductance only in restricted geometries such as two bulk media, for lack of an efficient forward solution that admits anisotropy, multilayers, and depth-dependent vertical thermal boundary conductance together. We present a Green's-function boundary integral equation (GBIE) method that couples transfer-matrix Green's functions to an interface-only integral equation for depth-dependent $G_v(z)$, supporting dissimilar orthotropic multilayers ($k_x\neq k_y\neq k_z$) on either side and horizontal conductance $G_h$. For anisotropic film-on-substrate multilayers with films from $1~μ\mathrm{m}$ to $100~\mathrm{nm}$, the GBIE agrees with three-dimensional finite element method (FEM) predictions to within one percent mean normalized phase and amplitude error, while running $29\text{--}210\times$ faster and reducing peak memory by factors of $120\text{--}450$ in single-core tests; a JIT-compiled JAX implementation reaches up to $4100\times$ on a matched 16-core comparison. The GBIE further reproduces a continuous film over a buried interface, representative of a thermoreflectance measurement, and a finite-depth interface with depth-dependent $G_v(z)$. The GBIE accommodates lateral-to-film-thickness ratios above $10^{5}$, where volumetric FEM can become computationally prohibitive. These results establish an efficient forward solution for vertical-interface heat transport in systems ranging from microelectronic device sidewalls to grain boundaries in polycrystalline solids.

physics.app-ph