Combine Influences of Nanoparticulate Hematite Thin Film Thickness, Roughness, and Weight on Its Photoelectrochemical Performance and Viscous/ Thermal Characteristics of Source Precursor

Romy Loehnert; Artur Braun; Debajeet K. Bora

Home/Archive/arXiv

arXiv · 2403.19069

Combine Influences of Nanoparticulate Hematite Thin Film Thickness, Roughness, and Weight on Its Photoelectrochemical Performance and Viscous/ Thermal Characteristics of Source Precursor

Romy Loehnert·Artur Braun·Debajeet K. Bora

View original source ↗Read source document ↗Export metadata ↓

Abstract

The objective of this work was to investigate the photoelectrochemical (PEC) performance of nanoparticulate hematite thin film photoelectrodes prepared by a soft-chemistry route. Two cost-effective thin film fabrication techniques were employed to deposit the hematite film. First, the film was deposited on conducting glass substrates by dip coating of the organic precursor containing fatty acid derivatives of iron salts. Process parameters such as the concentration of iron oleic acid derivative precursor solution, the thickness of the organic film, before annealing and the number of deposited layers along with their weight and roughness were studied. In the second approach, the influence of the spin coating process on film formation and respective photoelectrochemical (PEC) performance have been discussed. It was found that the PEC performance of spin-coated samples was lower than that of dip coated samples due to the effect of films rough and smooth characteristics. It is found that the rough surface of the photoelectrode is a prerequisite to achieving good photocurrent values. Here, three-layer samples with roughness between 600nm to 800nm and bulk thickness up to 700nm provided photocurrent densities of 0.6mA/cm2. In part 2 of the manuscript, we have elaborately discussed the roughness and smooth behavior of thin films using X-ray reflectometry technique. Followed by this, a detailed account of the viscous and thermal properties of the fatty acid derivatives of iron precursor have been discussed.

Explore related subjects

physics.app-ph cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Romy Loehnert, Artur Braun, Debajeet K. Bora. 2024-03-28. Combine Influences of Nanoparticulate Hematite Thin Film Thickness, Roughness, and Weight on Its Photoelectrochemical Performance and Viscous/ Thermal Characteristics of Source Precursor. https://arxiv.org/abs/2403.19069

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph↗

arXiv2026

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗