Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2405.00517

Contrasting Irradiation Behavior of Dual Phases in Ti-6Al-4V Alloy at Low-Temperature Due to Omega-phase Precursors in Beta-phase Matrix

Taku Ishida·Sho Kano·Eiichi Wakai·Tamaki Shibayama·Shunsuke Makimura·Hiroaki Abe
View original source ↗Read source document ↗Export metadata ↓

Abstract

Aiming to simulate the radiation damage effect on a dual alpha+beta phase Ti-6Al-4V alloy utilized as high-intensity accelerator beam window material, a series of irradiation experiments were conducted with a 2.8 MeV-Fe^2+ ion beam in several dpa regions at room temperature. The nano-indentation hardness increased steeply at 1 dpa and unchanged up to 10 dpa, due to the saturation of defect clusters and tangled dislocations in the dominant alpha-phase matrix with a size of 2~3 nm and a density of about 1x10^23 m^-3. In contrast in the intergranular beta-phase, larger loops of 20~30 nm diameter were observed with much less density of about 5x10^20 m^-3. The diffraction pattern showed rectilinear diffuse streaks between the beta-phase reflections, corresponding to the omega-phase precursor, without dose dependency in its intensity. FFT/I-FFT analysis of the HREM revealed a sub-nanometer-sized lattice disorder with local fluctuations, not discrete but continuous, and homogeneously distributed within the matrix beta-phase stably against the irradiation. The significantly low dislocation density and the absence of phase transformation in the beta-phase matrix could be attributed either to the strong sink effect expected for this distinctive sub-nanometer-sized homogeneous lattice disorder or to the anomalous point defect recombination induced by the high mobility of vacancies, both of which are originated from the metastable omega-phase precursors specifically formed in the beta(BCC) phase of group-4 transition metals.

Explore related subjects

cond-mat.mtrl-sciphysics.acc-ph

Keep this discovery

BibTeXRIS

Taku Ishida, Sho Kano, Eiichi Wakai, Tamaki Shibayama, Shunsuke Makimura, Hiroaki Abe. 2024-05-01. Contrasting Irradiation Behavior of Dual Phases in Ti-6Al-4V Alloy at Low-Temperature Due to Omega-phase Precursors in Beta-phase Matrix. https://doi.org/10.1016/j.jallcom.2024.174701

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗