A Two-Stage Machine Learning-Aided Approach for Quench Identification at the European XFEL

Lynda Boukela; Annika Eichler; Julien Branlard; Nur Zulaiha Jomhari

Home/Archive/arXiv

arXiv · 2407.08408

A Two-Stage Machine Learning-Aided Approach for Quench Identification at the European XFEL

Lynda Boukela·Annika Eichler·Julien Branlard·Nur Zulaiha Jomhari

View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper introduces a machine learning-aided fault detection and isolation method applied to the case study of quench identification at the European X-Ray Free-Electron Laser. The plant utilizes 800 superconducting radio-frequency cavities in order to accelerate electron bunches to high energies of up to 17.5 GeV. Various faulty events can disrupt the nominal functioning of the accelerator, including quenches that can lead to a loss of the superconductivity of the cavities and the interruption of their operation. In this context, our solution consists in analyzing signals reflecting the dynamics of the cavities in a two-stage approach. (I) Fault detection that uses analytical redundancy to process the data and generate a residual. The evaluation of the residual through the generalized likelihood ratio allows detecting the faulty behaviors. (II) Fault isolation which involves the distinction of the quenches from the other faults. To this end, we proceed with a data-driven model of the k-medoids algorithm that explores different similarity measures, namely, the Euclidean and the dynamic time warping. Finally, we evaluate the new method and compare it to the currently deployed quench detection system, the results show the improved performance achieved by our method.

Explore related subjects

physics.ins-det cs.AI

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Lynda Boukela, Annika Eichler, Julien Branlard, Nur Zulaiha Jomhari. 2024-07-11. A Two-Stage Machine Learning-Aided Approach for Quench Identification at the European XFEL. https://arxiv.org/abs/2407.08408

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Femtoscopy Measurement with S$π$RIT TPC in Radioactive BeamHeavy-ion Collisions

Femtoscopy is a powerful tool for exploring the dynamic emitting structure in heavy-ion collisions, while radioactive beam heavy-ion collisions enable the investigation of nuclear matter under extreme isospin conditions. Here, we successfully perform femtoscopy measurements using the S$π$RIT Time Projection Chamber (TPC). A dedicated correction scheme for track merging and splitting is proposed, which is well applicable to rectangular TPCs housed inside dipole magnets and effectively improves the reconstructed correlation functions at small relative momenta. Focusing on the proton-proton (p-p) correlation function in the 270 MeV/u $^{132}\text{Sn}+^{124}\text{Sn}$ system, we successfully apply the track merging and splitting correction; additionally, the TPC angular acceptance exhibits a negligible impact on the correlation function. A systematic uncertainty quantification framework is established. The experimental results of the p-p correlation function confirm the feasibility of the S$π$RIT TPC for femtoscopy measurements and provide technical support for high-precision femtoscopy studies using rectangular TPCs in radioactive beam heavy-ion collisions.

physics.ins-det↗

arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗

arXiv2026

Investigation of Widefield NV-Center Magnetic Imaging for Non-Destructive Materials Testing

Due to progressing miniaturization, material fatigue is expected to gain importance on microscopic scales. Nevertheless, most non-destructive testing techniques are optimized for macroscopic scales. Therefore, new approaches applicable to miniaturized samples need to be explored. High spatial resolution imaging of a material's magnetic stray field enables sensitive detection of microstructural changes due to the local interplay of magnetic properties, strain, and defects. Up to now, this approach has rarely been used for materials testing since high-resolution magnetic sensing is traditionally challenging. Novel quantum sensing techniques offer the potential to close this gap. One of the most prominent quantum sensors, the nitrogen vacancy center in diamond, is investigated for non-destructive testing applications within the scope of this work. An experimental system based on a widefield sensing approach was developed to image magnetic stray field distributions within seconds to minutes over areas up to 1 x 1 $mm^2$. Magnetic sensitivities below 10 $μ$T/$\sqrt{\text{Hz}}$ and a spatial resolution of 1-2 $μ$m were achieved. The technique offers high mechanical stability, which is crucial for non-destructive testing applications. Comparison with magneto-optical Kerr effect measurements showed that the magnetic field maps are strongly correlated with the material's surface domains while containing additional information from deeper inside the sample. Characteristic changes in the magnetic stray field distribution were detected in an electrical steel sample after cyclic loading. A potential marker for early fatigue damage was deduced from the splitting gradient distribution, while 2D Fourier transform analysis provided additional insight.

physics.ins-det↗