Search arXivSearch

arXiv · 2407.18187

First Demonstration of HZO/beta-Ga2O3 Ferroelectric FinFET with Improved Memory Window

Abstract

We have experimentally demonstrated the effectiveness of beta-gallium oxide (beta-Ga2O3) ferroelectric fin field-effect transistors (Fe-FinFETs) for the first time. Atomic layer deposited (ALD) hafnium zirconium oxide (HZO) is used as the ferroelectric layer. The HZO/beta-Ga2O3 Fe-FinFETs have wider counterclockwise hysteresis loops in the transfer characteristics than that of conventional planar FET, achieving record-high memory window (MW) of 13.9 V in a single HZO layer. When normalized to the actual channel width, FinFETs show an improved ION/IOFF ratio of 2.3x10^7 and a subthreshold swing value of 110 mV/dec. The enhanced characteristics are attributed to the low-interface state density (Dit), showing good interface properties between the beta-Ga2O3 and HZO layer. The enhanced polarization due to larger electric fields across the entire ferroelectric layer in FinFETs is validated using Sentaurus TCAD. After 5x10^6 program/erase (PGM/ERS) cycles, the MW was maintained at 9.2 V, and the retention time was measured up to 3x10^4 s with low degradation. Therefore, the ultrawide bandgap (UWBG) Fe-FinFET was shown to be one of the promising candidates for high-density non-volatile memory devices.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Seohyeon Park, Jaewook Yoo, Hyeojun Song, Hongseung Lee, Seongbin Lim, Soyeon Kim, Minah Park, Bongjoong Kim, Keun Heo, Peide D. Ye, Hagyoul Bae. 2024-07-25. First Demonstration of HZO/beta-Ga2O3 Ferroelectric FinFET with Improved Memory Window. https://arxiv.org/abs/2407.18187

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Measuring vacancy-type defect density in monolayer semiconductors

Two-dimensional (2D) materials have attracted wide-spread interest due to their unique and tunable properties. Their optoelectronic, mechanical, and thermal properties are greatly influenced by crystal defects, which are, in turn, used to control these properties. However, experimental quantification of the density of defects, whether deliberately introduced or inherent, is very difficult in these atomically thin materials. Here we show that helium atom micro-diffraction can be used to measure the defect density in ~15x20um monolayer MoS2, a prototypical 2D semiconductor, quickly and easily compared to standard methods. We present a simple analytic model, the lattice gas equation, that captures the relationship between atomic Bragg diffraction intensity and defect density. The model, combined with ab initio scattering calculations, shows that our technique can immediately be applied to a wide range of 2D materials, independent of sample chemistry or structure. Additionally, wafer-scale characterization is immediately possible.

physics.app-ph

Compact Modeling of Oxide-Semiconductor, 2D Material, Carbon Nanotube, and Cryogenic Transistors with Experiment Verification

This paper presents a unified compact model for emerging transistor technologies, including oxide-semiconductor field-effect transistors (OSFETs), 2D material FETs (2DFETs), carbon nanotube FETs (CNFETs), and cryogenic MOSFETs. A unified charge-density formulation is developed to account for quantum confinement, trap charges, and band-tail states in channel charge calculations. A physics-based transport model is introduced to seamlessly capture carrier transport from the long-channel diffusive regime to the short-channel ballistic limit. Scaling models are incorporated to accurately describe 2D electrostatic effects. Cryogenic operation is modeled through the inclusion of band-tail states and temperature-dependent mobility and threshold voltage. The proposed model is validated against experimental data from the fabricated OSFETs with multiple channel lengths and published measurements of 2DFETs, CNFETs, and cryogenic MOSFETs. Excellent agreement is demonstrated across diverse device architectures, operating conditions, and material systems.

physics.app-ph

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph