Predicting the Realizable Maximum Power Factor using the Jonker and Ioffe formulation: Al-doped ZnO Triangular Microcrystals with Graphite Inclusion Case Study

Soumya Biswas; Keshav Dabral; Saptak Majumder; Rajasekar Parasuraman; Aditya S. Dutt; Vinayak B. Kamble

Home/Archive/arXiv

arXiv · 2409.09728

Predicting the Realizable Maximum Power Factor using the Jonker and Ioffe formulation: Al-doped ZnO Triangular Microcrystals with Graphite Inclusion Case Study

Soumya Biswas·Keshav Dabral·Saptak Majumder·Rajasekar Parasuraman·Aditya S. Dutt·Vinayak B. Kamble

View original source ↗Read source document ↗Export metadata ↓

Abstract

Among the popular TE materials, selenides and tellurides are the benchmarks of high-efficiency systems. However, for the high-temperature application (>700 K), it is required to rely on the silicides and the oxides due to their exceptional thermal stability. ZnO is among the first few oxides in the field of thermoelectricity. Al-doped ZnO is a proven material for its high-temperature thermoelectric applications. However, the high grain boundary resistance limits further improvement of the efficiency of this oxide. Band-engineering, band-modification is a successful approach in lowering the grain boundary resistance. The addition of graphite and graphite-based materials at the grain boundaries is shown to serve this purpose. In this work, graphite powder is added in varying proportions to Al-doped ZnO triangular microcrystals. Thus, prepared materials are characterized to confirm the formation and investigate the nature of interface, morphology, etc. TE parameters such as electrical conductivity, Seebeck coefficient, and thermal conductivity of those materials also have been measured. The theoretical calculation of TE efficiency zT often differs from the actual experimental results due to the wide range of preparation methods, leading to changes in porosity, the nature and density defects, and several other factors. In this paper, an effort has been made to estimate the maximum achievable power factor (PFmax) from the measured TE parameters of this set of samples by the Jonker and Ioffe analysis. Based on the predicted PFmax, an appropriate material composition has been identified to achieve that same. Subsequently, including the measured parameters the TE efficiency (zT) is calculated. Further, a sudden dip observed in the thermal conductivity at the high-temperature range (625 K - 1000 K) of the prepared undoped ZnO graphite composite is investigated in this paper.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Soumya Biswas, Keshav Dabral, Saptak Majumder, Rajasekar Parasuraman, Aditya S. Dutt, Vinayak B. Kamble. 2024-09-19. Predicting the Realizable Maximum Power Factor using the Jonker and Ioffe formulation: Al-doped ZnO Triangular Microcrystals with Graphite Inclusion Case Study. https://arxiv.org/abs/2409.09728

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Symmetry-induced magnetic fullerene

Defect-free, charge-neutral, pure-carbon materials are generally viewed as intrinsically non-magnetic. Here we challenge this view by establishing a fundamental principle of symmetry-induced magnetism in pure-carbon fullerene systems through molecular orbital theory. We show that high-order symmetry of fullerene molecules or their crystalline lattices induces degenerate energy levels and hence, quantised magnetic moments at half filling. This mechanism holds for all high-order symmetries. It suggests a plausible intrinsic origin for the previously debated magnetic fullerene. Additionally, recent experimental advances in the synthesis of monolayer fullerene networks provide a feasible platform to implement our prediction on the deep link between symmetry and magnetism in these systems. Our results create new, broad frontiers of quantum magnetism by introducing molecular or crystalline symmetries in any lattice.

cond-mat.mtrl-sci↗

arXiv2026

Tritium for Nanoscale Hydrogen Analysis by Atom Probe Tomography

Accurate nanoscale detection of hydrogen is essential for understanding hydrogen-related phenomena in materials, yet conventional tracing with deuterium is often complicated by residual background hydrogen. This study evaluates tritium as a highly resolvable isotopic marker for nanoscale hydrogen analysis in metals using atom probe tomography. Titanium was selected for its ability to incorporate hydrogen isotopes, providing a suitable platform for tritium detection. Time of flight secondary ion mass spectrometry and electron backscatter diffraction were performed prior to tritium charging to characterize the initial composition and microstructure. Atom probe tomography in laser mode before and after tritium charging, at three post-charging time intervals, enables tracking of tritium incorporation over time. Thermal desorption analysis confirmed the presence of tritium and complemented the secondary ion mass spectrometry measurements, highlighting the role of the surface oxide layer in modulating tritium release. While tritium, deuterium, and protium differ in their diffusion and trapping behavior, the distinct mass signal associated with tritium provides a practical advantage for resolving hydrogen at very low concentrations. This work serves as a fundamental benchmarking study for leveraging tritium and atom probe tomography as a combined tool for understanding hydrogen in materials, relevant for interpreting local processes such as hydrogen embrittlement.

cond-mat.mtrl-sci↗

arXiv2026

Interfacial melting as a thermodynamic indicator of solid-state synthesizability

Computational materials discovery commonly ranks candidate materials by their thermodynamic stability on the formation energy convex hull, yet many predicted-stable phases resist synthesis. We propose that solid-state synthesizability through interfacial-melt-mediated routes requires an additional thermodynamic condition: the interfacial melt at the target composition must itself remain locally stable against spinodal decomposition. We examine this in the classical Fe--B system, where thermodynamically stable FeB$_4$ has been reported under high-pressure synthesis but not in low-pressure synthesis attempts. Using melt--quench molecular dynamics driven by a fine-tuned machine-learning interatomic potential, we find that, at ambient pressure, the B-rich interfacial melt near the FeB$_4$ composition develops a concave free-energy landscape, signaling a demixing instability that is corroborated by the concentration--concentration structure factor and correlated with low-energy icosahedral and pentagonal-pyramidal boron motifs. In contrast to FeB$_4$, metastable Fe$_3$B and Fe$_{23}$B$_6$ remain synthesizable because their corresponding melts are stable. Applied pressure introduces a convex $PV$ contribution that strongly suppresses this instability, reducing the curvature at the FeB$_4$ composition to within the uncertainty of our fit at 1800~K, consistent with the experimental synthesis boundary. Comparison with CrB$_4$ further shows that weaker melt instability correlates with easier experimental synthesis. Interfacial-melt stability, which atomistic simulations can assess via the low-$k$ concentration--concentration structure factor, is thus proposed as a practical thermodynamic screening descriptor of synthesizability for AI-assisted materials discovery.

cond-mat.mtrl-sci↗