VO2 films grown on TiO2 sub-layer: influence of thickness on structural, electrical and optical properties

M. E. Kutepov; V. E. Kaydashev; D. V. Stryukov; A. S. Konstantinov; A. V. Nikolskiy; A. T. Kozakov; A. D. Morozov; I. K. Domaratskiy; S. S. Zhukov; E. M. Kaidashev

arXiv · 2411.14920

VO2 films grown on TiO2 sub-layer: influence of thickness on structural, electrical and optical properties

M. E. Kutepov·V. E. Kaydashev·D. V. Stryukov·A. S. Konstantinov·A. V. Nikolskiy·A. T. Kozakov·A. D. Morozov·I. K. Domaratskiy·S. S. Zhukov·E. M. Kaidashev

View original source ↗Read source document ↗Export metadata ↓

Abstract

Vanadium dioxide with metal-to-insulator transition (MIT) that is triggered by heat, current or light is a promising material for modern active THz/mid-IR metasurfaces and all-optical big data processing systems. Multilayer VO2-based active metasurfaces are urgently needed however several important issues related to VO2 properties in VO2/TiO2/Al2O3 films should be thoroughly examined first. We study electrical, optical and structural properties of VO2 films as well as their composition and switching characteristics as function of the VO2 layer thickness in VO2/TiO2 composites. XRD analysis revealed an epitaxial growth of films with deformation of the monoclinic VO2 lattice to hexagonal symmetry. Reduced VO2 layer thickness from 170 nm to 20 nm results in increased phase transition temperature while the width of the resistance versus temperature hysteresis loop R(T) remains constant at ~6C for all VO2 thicknesses in the range of 20-170 nm. The resistance alteration ratio is reduced from 4.2e3 to 2.7e2 in thinner films. Raman spectra reveal a significant shift of VO2 lattice vibration modes for films thinner than 30 nm claiming a great structural strain whereas modes position for thicker VO2 layers are similar to those in bulk structure. Composition of VO2 films has revealed only a minor alteration of VO2/V2O5 phases ratio from 1.6 to 1.8 when the film thickness has been increased from 20 nm to 50 nm. Investigation of surface elemental composition and valence states of VO2 films revealed that VO2/V2O5 ratio remains practically unchanged with thickness reduction. The study of electrical MIT dynamics revealed the switching time of a 50 nm VO2 film to be as low as 800 ns.

Explore related subjects

cond-mat.mtrl-sci physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

M. E. Kutepov, V. E. Kaydashev, D. V. Stryukov, A. S. Konstantinov, A. V. Nikolskiy, A. T. Kozakov, A. D. Morozov, I. K. Domaratskiy, S. S. Zhukov, E. M. Kaidashev. 2025-12-09. VO2 films grown on TiO2 sub-layer: influence of thickness on structural, electrical and optical properties. https://arxiv.org/abs/2411.14920

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Towards ultra-scaled nanoelectronics using the zipper material system $Bi_2O_2Se/Bi_2SeO_5$

Two-dimensional (2D) materials could overcome the scaling bottleneck of nanoelectronics by enabling atomically thin channels, superior electrostatic control, and reduced short-channel effects. However, progress is limited by the lack of semiconductor–insulator interfaces being simultaneously scalable, stable, and reliable. Conventional 2D interfaces are often low quality or require transferring dissimilar materials, limiting reproducibility and scalability. We show that the zipper heterostructure formed by the high-mobility 2D semiconductor Bi 2 O 2 Se and its native high- κ oxide Bi 2 SeO 5 addresses these challenges, providing an atomically sharp, chemically matched interface with excellent electrostatics and promising scaling potential. We further present the first comprehensive multiscale assessment of Bi 2 O 2 Se/Bi 2 SeO 5 transistors targeting thermal stability, reliability, and scalability by linking atomic-scale structure and defects to device-level behavior across four transistor generations (top-gated, fin, and two gate-all-around architectures). Benchmarking against IRDS-2035 targets indicates that Bi 2 O 2 Se/Bi 2 SeO 5 devices could deliver high drive current with low gate leakage under aggressive scaling, potentially surpassing the targets in the upper-bound region of the sensitivity analysis. Finally, we identify oxygen-related oxide defects as the dominant origin of hysteresis consistent with a beneficial role of encapsulation and oxygen-rich annealing. Together, our findings support the potential of this zipper material system as a technologically-credible and manufacturing-relevant platform for future nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2026

Influence of Heterogeneity on the Response of Architected Metamaterials

Architected metamaterials like foams and lattices exhibit complex responses governed by microstructural instabilities, localization, and phase-transition-like phenomena. Their behavior is further affected by heterogeneities inherent in their microstructure often caused through manufacturing processes. In this study we extend a gradient-enhanced, nonlocal continuum formulation to incorporate stochastic material heterogeneity through Gaussian random fields imposed on selected constitutive parameters. The framework enables independent control of both the amplitude and spatial correlation of material fluctuations while preserving thermodynamic consistency and regularization of localization. It also introduces a characteristic lengthscale ratio between the nonlocal and correlation lengthscales, that enables modeling at the limit of random or spatially correlated microstructures. Finite element simulations of confined compression and indentation show that heterogeneity fundamentally alters phase nucleation, localization morphology, and macroscopic response. Overall, the proposed framework provides a unified approach for linking stochastic material variability to instability-driven mechanics in architected metamaterials, enabling improved understanding of imperfection sensitivity, stability and design. It showcases how heterogeneity alone can influence characteristic features of the response, such as stability, slope of the plateau region, and elimination of the initial elastic regime.

cond-mat.mtrl-sci↗

arXiv2026

Structural, electronic, and optical properties of hexagonal GeSn from density functional theory

Unlike cubic GeSn, which undergoes an indirect-to-direct bandgap transition only above a finite Sn concentration, lonsdaleite (2H) germanium is an intrinsic direct-gap semiconductor. We employ first-principles density functional theory to investigate the structural, electronic, and optical properties of 2H-Ge$_{1-x}$Sn$_{x}$ random alloys in the dilute Sn regime ($x \le 0.10$). Substitutional disorder is modeled using 48-atom special quasirandom structure (SQS) supercells, and the coherent effective band structure is recovered via spectral band unfolding. We show that the semiconducting alloy configurations retain a direct bandgap at the $Γ$ point, with a moderate, nearly linear reduction of the bandgap in the dilute regime that shifts the fundamental absorption edge toward the mid-infrared. As the gap approaches zero, its calculated value becomes increasingly sensitive to the atomic configuration and supercell size. Evaluation of the optical transition matrix elements shows that the polarization anisotropy characteristic of pristine 2H-Ge remains observable under dilute Sn alloying. Although alloy disorder relaxes the crystal selection rules, the band edge response remains dominated by light polarized perpendicular to the crystal $c$ axis, whereas the parallel component remains weaker. These results identify dilute hexagonal GeSn as a tunable direct-gap system with a strongly polarization-dependent optical response in the infrared.

cond-mat.mtrl-sci↗