Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2412.01198

One-step Fabrication of Sharp Platinum/Iridium Tips via Amplitude-Modulated Alternating-Current Electropolishing

Yuto Nishiwaki·Toru Utsunomiya·Shu Kurokawa·Takashi Ichii
View original source ↗Read source document ↗Export metadata ↓

Abstract

The platinum/iridium (Pt/Ir) alloy tip for scanning probe microscopy (SPM) was fabricated by amplitude-modulated alternating-current (AC) electropolishing. The clean tips with a radius of curvature less than 100 nm were reproducibly obtained by applying the sinusoidal voltage in the frequency ($f_0$) of $900\ \mathrm{Hz} \leq f_0 \leq 1500\ \mathrm{Hz}$ with amplitude modulation by the sinusoidal wave in the modulation frequency ($f_s$) of $f_s=0.1f_0$ in $\mathrm{CaCl}_2$/$\mathrm{H_2O}$/acetone solution. The analyses by scanning electron microscopy with an energy-dispersive X-ray analyzer (SEM-EDX) and atom probe tomography (APT) showed that a uniform Pt/Ir alloy was exposed on the tip surface as a clean surface without O or Cl contamination. The STM imaging using the fabricated tip showed that it is more suitable for investigating rough surfaces than conventional as-cut tips and applicable for atomic-resolution imaging. Furthermore, we applied the fabricated tip to qPlus AFM analysis in liquid and showed that it has atomic resolution in both the horizontal and vertical directions. Therefore, it is concluded that the amplitude-modulated AC etching method reproducibly provides sharp STM/AFM tips capable of both atomic resolution and large-area analyses without complex etching setups.

Explore related subjects

cond-mat.mtrl-sciphysics.app-phphysics.chem-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yuto Nishiwaki, Toru Utsunomiya, Shu Kurokawa, Takashi Ichii. 2025-02-17. One-step Fabrication of Sharp Platinum/Iridium Tips via Amplitude-Modulated Alternating-Current Electropolishing. https://arxiv.org/abs/2412.01198

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Towards ultra-scaled nanoelectronics using the zipper material system $Bi_2O_2Se/Bi_2SeO_5$

Two-dimensional (2D) materials could overcome the scaling bottleneck of nanoelectronics by enabling atomically thin channels, superior electrostatic control, and reduced short-channel effects. However, progress is limited by the lack of semiconductor–insulator interfaces being simultaneously scalable, stable, and reliable. Conventional 2D interfaces are often low quality or require transferring dissimilar materials, limiting reproducibility and scalability. We show that the zipper heterostructure formed by the high-mobility 2D semiconductor Bi 2 O 2 Se and its native high- κ oxide Bi 2 SeO 5 addresses these challenges, providing an atomically sharp, chemically matched interface with excellent electrostatics and promising scaling potential. We further present the first comprehensive multiscale assessment of Bi 2 O 2 Se/Bi 2 SeO 5 transistors targeting thermal stability, reliability, and scalability by linking atomic-scale structure and defects to device-level behavior across four transistor generations (top-gated, fin, and two gate-all-around architectures). Benchmarking against IRDS-2035 targets indicates that Bi 2 O 2 Se/Bi 2 SeO 5 devices could deliver high drive current with low gate leakage under aggressive scaling, potentially surpassing the targets in the upper-bound region of the sensitivity analysis. Finally, we identify oxygen-related oxide defects as the dominant origin of hysteresis consistent with a beneficial role of encapsulation and oxygen-rich annealing. Together, our findings support the potential of this zipper material system as a technologically-credible and manufacturing-relevant platform for future nanoelectronics.

cond-mat.mtrl-sci↗
arXiv2026

Influence of Heterogeneity on the Response of Architected Metamaterials

Architected metamaterials like foams and lattices exhibit complex responses governed by microstructural instabilities, localization, and phase-transition-like phenomena. Their behavior is further affected by heterogeneities inherent in their microstructure often caused through manufacturing processes. In this study we extend a gradient-enhanced, nonlocal continuum formulation to incorporate stochastic material heterogeneity through Gaussian random fields imposed on selected constitutive parameters. The framework enables independent control of both the amplitude and spatial correlation of material fluctuations while preserving thermodynamic consistency and regularization of localization. It also introduces a characteristic lengthscale ratio between the nonlocal and correlation lengthscales, that enables modeling at the limit of random or spatially correlated microstructures. Finite element simulations of confined compression and indentation show that heterogeneity fundamentally alters phase nucleation, localization morphology, and macroscopic response. Overall, the proposed framework provides a unified approach for linking stochastic material variability to instability-driven mechanics in architected metamaterials, enabling improved understanding of imperfection sensitivity, stability and design. It showcases how heterogeneity alone can influence characteristic features of the response, such as stability, slope of the plateau region, and elimination of the initial elastic regime.

cond-mat.mtrl-sci↗
arXiv2026

Structural, electronic, and optical properties of hexagonal GeSn from density functional theory

Unlike cubic GeSn, which undergoes an indirect-to-direct bandgap transition only above a finite Sn concentration, lonsdaleite (2H) germanium is an intrinsic direct-gap semiconductor. We employ first-principles density functional theory to investigate the structural, electronic, and optical properties of 2H-Ge$_{1-x}$Sn$_{x}$ random alloys in the dilute Sn regime ($x \le 0.10$). Substitutional disorder is modeled using 48-atom special quasirandom structure (SQS) supercells, and the coherent effective band structure is recovered via spectral band unfolding. We show that the semiconducting alloy configurations retain a direct bandgap at the $Γ$ point, with a moderate, nearly linear reduction of the bandgap in the dilute regime that shifts the fundamental absorption edge toward the mid-infrared. As the gap approaches zero, its calculated value becomes increasingly sensitive to the atomic configuration and supercell size. Evaluation of the optical transition matrix elements shows that the polarization anisotropy characteristic of pristine 2H-Ge remains observable under dilute Sn alloying. Although alloy disorder relaxes the crystal selection rules, the band edge response remains dominated by light polarized perpendicular to the crystal $c$ axis, whereas the parallel component remains weaker. These results identify dilute hexagonal GeSn as a tunable direct-gap system with a strongly polarization-dependent optical response in the infrared.

cond-mat.mtrl-sci↗